• LCA


    You are given a tree (an undirected acyclic connected graph) with N nodes, and edges numbered 1, 2, 3...N-1. Each edge has an integer value assigned to it, representing its length.

    We will ask you to perfrom some instructions of the following form:

    • DIST a b : ask for the distance between node a and node b
      or
    • KTH a b k : ask for the k-th node on the path from node a to node b

    Example:
    N = 6
    1 2 1 // edge connects node 1 and node 2 has cost 1
    2 4 1
    2 5 2
    1 3 1
    3 6 2

    Path from node 4 to node 6 is 4 -> 2 -> 1 -> 3 -> 6
    DIST 4 6 : answer is 5 (1 + 1 + 1 + 2 = 5)
    KTH 4 6 4 : answer is 3 (the 4-th node on the path from node 4 to node 6 is 3)

    Input

    The first line of input contains an integer t, the number of test cases (t <= 25). t test cases follow.

    For each test case:

    • In the first line there is an integer N (N <= 10000)
    • In the next N-1 lines, the i-th line describes the i-th edge: a line with three integers a b c denotes an edge between a, b of cost c (c <= 100000)
    • The next lines contain instructions "DIST a b" or "KTH a b k"
    • The end of each test case is signified by the string "DONE".

    There is one blank line between successive tests.

    Output

    For each "DIST" or "KTH" operation, write one integer representing its result.

    Print one blank line after each test.

    Example

    Input:
    1
    
    6
    1 2 1
    2 4 1
    2 5 2
    1 3 1
    3 6 2
    DIST 4 6
    KTH 4 6 4
    DONE
    
    Output:
    5
    3
    
    题目分析 : 两种操作,一是查看任意两点间的距离,二是查询从a到b第k个点是什么
    思路分析 : 裸的 LCA ,对于第二种操作,由于倍增中存的就是跳跃的点,所以查看跳到的第几个点也是很容易的
    代码示例 :
    #define ll long long
    const ll maxn = 1e4+5;
    const double pi = acos(-1.0);
    const ll inf = 0x3f3f3f3f;
    
    struct node
    {
        ll to, cost;
        node(ll _to = 0, ll _cost = 0):to(_to), cost(_cost){}
    };
    vector<node>ve[maxn];
    ll dep[maxn];
    ll grand[maxn][20], gw[maxn][20];
    ll N;
    
    void dfs(ll x, ll fa){
        for(ll i = 1; i <= N; i++){
            grand[x][i] = grand[grand[x][i-1]][i-1];
            gw[x][i] = gw[x][i-1] + gw[grand[x][i-1]][i-1];
        }
        for(ll i = 0; i < ve[x].size(); i++){
            ll to = ve[x][i].to;
            ll cost = ve[x][i].cost;
            if (to == fa) continue;
            grand[to][0] = x;
            gw[to][0] = cost;
            dep[to] = dep[x] + 1;
            dfs(to, x); 
        }
    }
    
    ll ans = 0;
    ll a, b, c;
    ll lca(){
        if (dep[a] > dep[b]) swap(a, b);
        
        ans = 0;
        for(ll i = N; i>= 0; i--){ 
            if (dep[a] < dep[b] && dep[grand[b][i]] >= dep[a]) {
                ans += gw[b][i];
                b = grand[b][i]; 
            }
        }
        for(ll i = N; i >= 0; i--){
            if (grand[a][i] != grand[b][i]) {
                ans += gw[a][i];
                ans += gw[b][i];
                a = grand[a][i], b = grand[b][i];
            }
        }
        if (a != b) return grand[a][0];
        else return a;
    }
    
    ll fid(ll a, ll b, ll f) {
        if (dep[a]-dep[f]+1 >= c){
            ll len = dep[a] - c + 1;
            if (len == 0) return 1;
            for(ll i = N; i >= 0; i--){
                if (dep[grand[a][i]] >= len){
                    a = grand[a][i];
                }
            }
            return a;
        }   
        else {
            ll len = c - (dep[a]-dep[f]+1) + dep[f];
            for(ll i = N; i >= 0; i--){
                if (dep[grand[b][i]] >= len){
                    b = grand[b][i];
                }
            }
            return b;
        }
    }
    
    int main() {
        //freopen("in.txt", "r", stdin);
        //freopen("out.txt", "w", stdout);
        ll t, n;
        char s[20];
        ll p1, p2;
        
        cin >> t;
        while(t--){
            scanf("%lld", &n);
            for(ll i = 1; i <= 10000; i++) ve[i].clear();
            for(ll i = 1; i< n; i++){
                scanf("%lld%lld%lld", &a, &b, &c);    
                ve[a].push_back(node(b, c));
                ve[b].push_back(node(a, c));
            }
            N = floor(log(n)/log(2)); 
            memset(grand, 0, sizeof(grand));
            memset(gw, 0, sizeof(gw));
            dep[1] = 0;
            dfs(1, 1); 
            while(1){
                scanf("%s", s);
                if (s[1] == 'O') break;
                else if (s[1] == 'I') {
                    scanf("%lld%lld", &a, &b);
                    ll f = lca();
                    if (a != b) {
                        ans += gw[a][0];
                        ans += gw[b][0];
                    }   
                    printf("%lld
    ", ans);
                }
                else if (s[1] == 'T'){
                    scanf("%lld%lld%lld", &a, &b, &c);
                    p1 = a, p2 = b;
                    ll f = lca();
                    printf("%lld
    ", fid(p1, p2, f));
                }
            }    
        }
        return 0;
    }
    /*
    10
    8
    1 2 1
    1 3 2
    1 7 3
    2 4 4
    2 5 5
    3 6 6
    7 8 7
    KTH 4 8 3
    DIST
    */
    
    东北日出西边雨 道是无情却有情
  • 相关阅读:
    MATLAB GUI制作快速入门
    JavaFX Chart设置数值显示
    Unity查找物体的四大主流方法及区别
    Matlab 图像转极坐标系
    使用python获得N个区分度较高的RGB颜色值
    Arduino学习笔记30
    Arduino学习笔记27
    Arduino学习笔记26
    Arduino学习笔记25
    Arduino学习笔记24
  • 原文地址:https://www.cnblogs.com/ccut-ry/p/8426748.html
Copyright © 2020-2023  润新知