• bfs + 路径输出


    You are given two pots, having the volume of A and B liters respectively. The following operations can be performed:

            FILL(i)        fill the pot i (1 ≤ i ≤ 2) from the tap;
            DROP(i)      empty the pot i to the drain;
            POUR(i,j)    pour from pot i to pot j; after this operation either the pot j is full (and there may be some water left in the pot i), or the pot i is empty (and all its contents have been moved to the pot j).

        Write a program to find the shortest possible sequence of these operations that will yield exactly C liters of water in one of the pots.
    Input

        On the first and only line are the numbers A, B, and C. These are all integers in the range from 1 to 100 and C≤max(A,B).
    Output

        The first line of the output must contain the length of the sequence of operations K. The following K lines must each describe one operation. If there are several sequences of minimal length, output any one of them. If the desired result can’t be achieved, the first and only line of the file must contain the word ‘impossible’.
    Sample Input

        3 5 4

    Sample Output

        6
        FILL(2)
        POUR(2,1)
        DROP(1)
        POUR(2,1)
        FILL(2)
        POUR(2,1)

    题意 :

    3 种操作,第一种将桶内装满,第二种将桶倒干净,第三种将一个桶内的倒入另一个桶。

    思路 :

    BFS做,每次将当前的状态打入队列,最后要输出路径,在结构体中存上一个点的位置。

    代码 :

    int a, b, c;
    struct node
    {
        int x, y;
        int pt;
        int temp;
        node *pre;
    }arr[400];
     
    int vis[105][105];
    int ans;
    stack<int>s;
    void bfs(){
        queue<node>que; // 每次将当前的状态打入队列,对于每个状态有 6 种处理方法
        memset(vis, 0, sizeof(vis));
        
        node v;
        v.x = 0, v.y = 0;
        v.pt = 0;
        v.temp = 0;
        v.pre = NULL;
        while(!que.empty()) que.pop();
        que.push(v);
        int cnt = -1;
        vis[0][0] = 1;
        
        while(!que.empty()){
            v = que.front();
            que.pop();
            cnt++;
            arr[cnt] = v;
            
            for(int i = 1; i <= 6; i++){
                switch(i){
                    case 1: 
                        v.x = a;
                        v.y = arr[cnt].y;
                        v.pt = 1;
                        break;
                    case 2:
                        v.x = arr[cnt].x;
                        v.y = b;
                        v.pt = 2;
                        break;
                    case 3:
                        v.x = 0;
                        v.y = arr[cnt].y;
                        v.pt = 3;
                        break;
                    case 4:
                        v.x = arr[cnt].x;
                        v.y = 0;
                        v.pt = 4;
                        break;
                    case 5:
                        if (arr[cnt].x > (b - arr[cnt].y)){
                            v.x = arr[cnt].x - (b - arr[cnt].y);
                            v.y = b;
                        }
                        else {
                            v.x = 0;
                            v.y = arr[cnt].x + arr[cnt].y;
                        }
                        v.pt = 5;
                        break;
                    case 6:
                        if (arr[cnt].y > (a - arr[cnt].x)){
                            v.x = a;
                            v.y = arr[cnt].y - (a - arr[cnt].x);
                        }
                        else {
                            v.x = arr[cnt].x + arr[cnt].y;
                            v.y = 0;
                        }
                        v.pt = 6;
                }
                if (vis[v.x][v.y]) continue;
                vis[v.x][v.y] = 1;
                v.temp = arr[cnt].temp + 1; 
                v.pre = &arr[cnt];
                if (v.x == c || v.y == c){
                    
                    while(!s.empty()) s.pop();
                    ans = v.temp;
                    while(v.pre){
                        s.push(v.pt);
                        v = *v.pre;
                    }
                    return;
                }
                que.push(v);
            }
        }
    }
    
    void print(){
        while(!s.empty()){
            int f = s.top();
            s.pop();
            switch(f){
                case 1: printf("FILL(1)
    ");break;
                case 2: printf("FILL(2)
    ");break;
                case 3: printf("DROP(1)
    ");break;
                case 4: printf("DROP(2)
    ");break;
                case 5: printf("POUR(1,2)
    ");break;
                case 6: printf("POUR(2,1)
    ");break;
            }
        }
    }
    
    int main() {
        
        while(~scanf("%d%d%d", &a, &b, &c)){
            ans = 0;
            bfs();
            
            if (ans == 0) printf("impossible
    ");
            else {
                printf("%d
    ", ans);
                print();
            }
        }
        return 0;
    }
    
    东北日出西边雨 道是无情却有情
  • 相关阅读:
    python基础学习笔记第二天 内建方法(s t r)
    p ython笔记第三天
    (转)字符编码笔记:ASCII,Unicode和UTF8
    const char * 和 char *const
    自己的毕业设计windows管理软件
    自己实现string类
    关于vs2003环境支持win7 的 IP设置
    很犀利的错误
    很容易犯的错误
    用C++ 设计一个不能被继承的类
  • 原文地址:https://www.cnblogs.com/ccut-ry/p/7782917.html
Copyright © 2020-2023  润新知