*&---------------------------------------------------------------------*
*& Report ZPPR0007
*&
*&---------------------------------------------------------------------*
*&zhijian.cai 2013-5-17
*&
*&---------------------------------------------------------------------*
REPORT zppr0007.
TYPE-POOLS: slis.
TABLES:vekp,vepo,makt.
*&---------------------------------------------------------------------*
*&全局自定义类型定义
*&---------------------------------------------------------------------*
TYPES:BEGIN OF typ_db,
exidv TYPE vekp-exidv, "柜号/托号
matnr TYPE char18, "物料编号
box TYPE c,
cmark TYPE c, "选择
venum TYPE vekp-venum, "HU
vhilm TYPE vekp-vhilm, "包装物料
meins TYPE vekp-meins, "单位
velin TYPE vepo-velin, "处理单位项目内容的类型如果是'3'就是箱子可以通过底层处理单位去取数量
unvel TYPE vepo-unvel, "底层处理单位
vemng TYPE vepo-vemng, "数量
maktx TYPE makt-maktx, "物料描述
charg TYPE vepo-charg, "批次
werks TYPE vepo-werks, "工厂
lgort TYPE vepo-lgort, "发出仓库
b1000020 TYPE atwrt, "标称功率
a_lgort TYPE vepo-lgort, "接受仓库
vbeln TYPE char10, "凭证号码
note TYPE char10, "备注
END OF typ_db.
*&---------------------------------------------------------------------*
*&全局内表、工作区 定义、
*&---------------------------------------------------------------------*
DATA gt_tab TYPE TABLE OF typ_db.
DATA gs_tab LIKE LINE OF gt_tab.
DATA alv_da TYPE typ_db.
DATA out_tab TYPE TABLE OF typ_db WITH HEADER LINE.
DATA tem_tab TYPE TABLE OF typ_db WITH HEADER LINE.
*----------------------------------------------------------------------*
* 去掉前导零
*----------------------------------------------------------------------*
DEFINE rm_zeros.
call function 'CONVERSION_EXIT_ALPHA_OUTPUT'
exporting
input = &1
importing
output = &1.
END-OF-DEFINITION.
*----------------------------------------------------------------------*
* CONSTANTS DEF
*----------------------------------------------------------------------*
CONSTANTS gc_pf_status TYPE slis_formname VALUE 'ALV_PF_STATUS'. “用于alv显示调用REUSE_ALV_GRID_DISPLAY函数GUI状态
CONSTANTS gc_user_command TYPE slis_formname VALUE 'ALV_USER_COMMAND'. ”用于alv显示调用REUSE_ALV_GRID_DISPLAY函数自定义按钮的事件
*----------------------------------------------------------------------*
* ALV
*----------------------------------------------------------------------*
DATA: gt_sort TYPE slis_t_sortinfo_alv.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
gs_fieldcat TYPE slis_fieldcat_alv.
DATA: gs_layout TYPE slis_layout_alv,
gf_repid TYPE sy-repid.
*----------------------------------------------------------------------*
* PARAMTER DEF#SELECT-OPTION etc.#
*----------------------------------------------------------------------*
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_exidv FOR vekp-exidv. "柜号/托号
SELECTION-SCREEN END OF BLOCK a.
*----------------------------------------------------------------------*
INITIALIZATION.
*----------------------------------------------------------------------*
TOP-OF-PAGE.
*----------------------------------------------------------------------*
START-OF-SELECTION.
PERFORM get_data.
*----------------------------------------------------------------------*
END-OF-SELECTION.
PERFORM display_data.
*&---------------------------------------------------------------------*
*& Form GET_DATA
*&---------------------------------------------------------------------*
FORM get_data .
*----------------------------------------------------------------------*
* 定义物料批次特性的
*----------------------------------------------------------------------*
DATA: lf_objek TYPE objnum,
lf_obtab TYPE tabelle,
lf_klart TYPE klassenart, "就是T-COD是MM03下面的批次分类下的对象下的类别种类
lf_class TYPE klasse_d, "就是T-COD是MM03下面的批次分类下的分配表里的类别
tmp_str TYPE string.
DATA: lt_char TYPE TABLE OF bapi1003_alloc_values_char,
lt_num TYPE TABLE OF bapi1003_alloc_values_num,
lt_curr TYPE TABLE OF bapi1003_alloc_values_curr,
lt_return TYPE TABLE OF bapiret2,
ls_char TYPE bapi1003_alloc_values_char,
ls_num TYPE bapi1003_alloc_values_num.
DATA: tmp_str1 TYPE cha_class_view-sollwert,
tmp_i TYPE cha_class_data-sollwert.
*----------------------------------------------------------------------*
* 定义一个子例程 增加物料号前导零
*----------------------------------------------------------------------*
DEFINE zm_convert_alpha_input.
call function 'CONVERSION_EXIT_MATN1_INPUT'
exporting
input = &1
importing
output = &1
exceptions
length_error = 1
others = 2.
if sy-subrc <> 0.
* Implement suitable error handling here
endif.
END-OF-DEFINITION.
SELECT a~venum "HU
a~exidv "柜号/托号
a~vhilm "包装物料
a~meins "单位
b~velin
b~unvel "底层处理单位
b~vemng "数量
b~matnr "物料编号
c1~maktx "物料描述
b~charg "批次
b~werks "工厂
b~lgort "发出仓库
INTO CORRESPONDING FIELDS OF TABLE gt_tab
FROM vekp AS a
INNER JOIN vepo AS b ON a~venum = b~venum
INNER JOIN makt AS c1 ON b~matnr = c1~matnr
WHERE a~exidv IN s_exidv
AND c1~spras = sy-langu.
LOOP AT gt_tab INTO gs_tab WHERE velin = '3'.
SELECT SINGLE a~vemng a~matnr a~charg a~werks a~lgort
INTO (gs_tab-vemng, gs_tab-matnr, gs_tab-charg, gs_tab-werks, gs_tab-lgort)
FROM vepo AS a
INNER JOIN makt AS b ON a~matnr = b~matnr
WHERE a~venum = gs_tab-venum
AND a~unvel = gs_tab-unvel
AND b~spras = sy-langu.
MODIFY gt_tab FROM gs_tab TRANSPORTING vemng matnr charg werks lgort.
ENDLOOP.
*----------------------------------------------------------------------*
* 定义存放物料批次特性值的内表
*----------------------------------------------------------------------*
DATA: BEGIN OF it_data OCCURS 0,
atnam LIKE cabn-atnam, "特征名称
atbez LIKE cabnt-atbez, "特征描述
atwrt LIKE cawn-atwrt, "特性值
END OF it_data.
*----------------------------------------------------------------------*
* 取批次特性先清空这些存放数据的变量和内表
*----------------------------------------------------------------------*
CLEAR: it_data,lf_objek,lf_obtab,lf_klart,lf_class,ls_num,ls_char,tmp_str1,tmp_i,gs_tab.
REFRESH: it_data,lt_num,lt_char,lt_curr,lt_return.
LOOP AT gt_tab INTO gs_tab.
IF gs_tab-charg IS NOT INITIAL.
zm_convert_alpha_input: gs_tab-matnr. "调用刚才定义的增加前导零，把物料编号增加前导零到18位赋给 lf_object
CALL FUNCTION 'VB_BATCH_2_CLASS_OBJECT'
EXPORTING
i_matnr = gs_tab-matnr "物料
i_charg = gs_tab-charg "批次
i_werks = gs_tab-werks "工厂
IMPORTING
e_objek = lf_objek "对应objectkey
e_obtab = lf_obtab "对应objecttable
e_klart = lf_klart "对应classtype
e_class = lf_class. "对应classnum
IF lf_objek IS NOT INITIAL.
CLEAR: lt_char, lt_num, lt_curr, lt_return.
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
objectkey = lf_objek
objecttable = lf_obtab
classnum = lf_class
classtype = lf_klart
TABLES
allocvaluesnum = lt_num "数值型特性值
allocvalueschar = lt_char "字符型特性值
allocvaluescurr = lt_curr "货币型特性值
return = lt_return. "返回值
ENDIF.
*----------------------------------------------------------------------*
*循环内表 字符型特性值 放在定义的特性值内表中
*----------------------------------------------------------------------*
LOOP AT lt_char INTO ls_char.
it_data-atnam = ls_char-charact. "特性名称
it_data-atwrt = ls_char-value_neutral. "特性值
it_data-atbez = ls_char-charact_descr. "特征描述
APPEND it_data.
CLEAR: ls_char,it_data.
ENDLOOP.
*----------------------------------------------------------------------*
*循环内表lt_num把数值型特性放在定义的特性值内表里
*----------------------------------------------------------------------*
CLEAR: ls_num, it_data.
LOOP AT lt_num INTO ls_num.
tmp_i = ls_num-value_from.
CALL FUNCTION 'QSS0_FLTP_TO_CHAR_CONVERSION'
EXPORTING
i_number_of_digits = 2 "小数点右边的位数是2位
i_fltp_value = tmp_i "数值型特性值
IMPORTING
e_char_field = tmp_str1. "转换后的小数点右边的位数是2位 数值型特性值
it_data-atnam = ls_num-charact. "特性名称
it_data-atwrt = tmp_str1. "特性值
CONDENSE it_data-atwrt. "去掉前后空格
it_data-atbez = ls_num-charact_descr. "特征描述
APPEND it_data.
CLEAR: ls_num, it_data.
ENDLOOP.
SORT it_data BY atnam. "排序批次特性表
DELETE ADJACENT DUPLICATES FROM it_data COMPARING ALL FIELDS. "删除重复的数据。
CLEAR it_data.
READ TABLE it_data WITH KEY atnam = 'B1000020'.
gs_tab-b1000020 = it_data-atwrt.
MODIFY gt_tab FROM gs_tab TRANSPORTING matnr b1000020.
CLEAR gs_tab.
ENDIF.
ENDLOOP.
*----------------------------------------------------------------------*
*计算同一柜子或者箱子在同一物料号下的数量总和
*----------------------------------------------------------------------*
DATA tem_gs TYPE typ_db.
DATA sun TYPE vepo-vemng VALUE 0.
LOOP AT gt_tab INTO gs_tab.
tem_gs = gs_tab .
sun = sun + gs_tab-vemng.
AT END OF matnr.
tem_tab = tem_gs.
tem_tab-vemng = sun.
APPEND tem_tab.
CLEAR sun.
ENDAT.
CLEAR: gs_tab, tem_gs, tem_tab.
ENDLOOP.
ENDFORM. " GET_DATA
*&---------------------------------------------------------------------*
*& Form DISPLAY_DATA
*&---------------------------------------------------------------------*
FORM display_data .
PERFORM alv_header.
PERFORM alv_display.
ENDFORM. " DISPLAY_DATA
*&---------------------------------------------------------------------*
*& Form ALV_HEADER
*&---------------------------------------------------------------------*
FORM alv_header .
PERFORM fieldcat_init.
ENDFORM. " ALV_HEADER
*&---------------------------------------------------------------------*
*& Form FIELDCAT_INIT
*&---------------------------------------------------------------------*
FORM fieldcat_init .
gs_layout-zebra = 'X'. " 显示斑马线
gs_layout-colwidth_optimize = 'X'. " 自动调整列宽
gs_layout-box_fieldname = 'BOX'.
gs_layout-box_tabname = 'GT_OUTPUT'.
DEFINE add_fieldcat.
gs_fieldcat-fieldname = &1. " 指定要显示的字段
gs_fieldcat-tabname = &2.
gs_fieldcat-seltext_l = &3. " 设置表头，就是ALV的列名称
gs_fieldcat-col_pos = &4. "位置
gs_fieldcat-checkbox = &5. " 设置列为复选框
gs_fieldcat-no_zero = &6. " 去掉前导零
gs_fieldcat-edit = &7.
append gs_fieldcat to gt_fieldcat.
clear gs_fieldcat.
END-OF-DEFINITION.
gs_fieldcat-fieldname = 'CMARK'.
gs_fieldcat-tabname = 'GT_TAB'.
gs_fieldcat-col_pos = '1'.
gs_fieldcat-seltext_l = '选择'.
gs_fieldcat-edit = 'X'.
gs_fieldcat-checkbox = 'X'.
APPEND gs_fieldcat TO gt_fieldcat.
* add_fieldcat 'CMART' 'GT_TAB' '选择' '1' 'X' '' 'X' .
add_fieldcat 'EXIDV' 'TEM_TAB[]' '柜号/箱号' '2' '' 'X' '' .
add_fieldcat 'MATNR' 'TEM_TAB[]' '物料编号' '3' '' 'X' '' .
add_fieldcat 'CHARG' 'TEM_TAB[]' '批次' '5' '' '' '' .
add_fieldcat 'MAKTX' 'TEM_TAB[]' '物料描述' '6' '' '' '' .
add_fieldcat 'VEMNG' 'TEM_TAB[]' '数量' '7' '' '' '' .
add_fieldcat 'MEINS' 'TEM_TAB[]' '单位' '8' '' '' '' .
add_fieldcat 'B1000020' 'TEM_TAB[]' '标称功率' '9' '' '' '' .
add_fieldcat 'WERKS' 'TEM_TAB[]' '工厂' '10' '' '' '' .
add_fieldcat 'LGORT' 'TEM_TAB[]' '发出仓库' '11' '' '' '' .
ENDFORM. " FIELDCAT_INIT
*&---------------------------------------------------------------------*
*& Form ALV_DISPLAY
*&---------------------------------------------------------------------*
FORM alv_display .
gf_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gf_repid
is_layout = gs_layout
it_fieldcat = gt_fieldcat
it_sort = gt_sort
i_save = 'A'
i_callback_pf_status_set = gc_pf_status ”设置ALV自定义按钮GUI
i_callback_user_command = gc_user_command ”设置ALV自定义按钮响应事件
TABLES
t_outtab = tem_tab[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. " ALV_DISPLAY
*&---------------------------------------------------------------------*
*& Form alv_user_command
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* -->R_UCOMM text
* -->RS_SELFIELD text
*----------------------------------------------------------------------*
FORM alv_user_command USING r_ucomm LIKE sy-ucomm ”编写自定义按钮响应事件
rs_selfield TYPE slis_selfield.
DATA: lo_guid TYPE REF TO cl_gui_alv_grid. “ 黄色标记的可以不要
"alv gridcontrol full screen.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = lo_guid.
"verification of changes.
CALL METHOD lo_guid->check_changed_data.
CASE r_ucomm.
WHEN 'PRINT'.
PERFORM print.
WHEN 'ALL'.
LOOP AT tem_tab.
tem_tab-cmark = 'X'.
MODIFY tem_tab TRANSPORTING cmark.
ENDLOOP.
WHEN 'SAL'.
LOOP AT tem_tab.
tem_tab-cmark = ''.
MODIFY tem_tab TRANSPORTING cmark.
ENDLOOP.
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM. "alv_user_command
*&---------------------------------------------------------------------*
*& Form alv_pf_status
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* -->RT_EXTAB text
*----------------------------------------------------------------------*
FORM alv_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZPPR0007_GUI001' .
ENDFORM. "alv_pf_status
*&---------------------------------------------------------------------*
*& Form PRINT
*&---------------------------------------------------------------------*
FORM print .
DATA: lf_flag TYPE c.
DATA lf_var TYPE rs38l_fnam.
DATA: ls_ssf TYPE ssfctrlop.
PERFORM get_alv_selection CHANGING lf_flag .
IF lf_flag = 'X'.
EXIT.
ENDIF.
ls_ssf-langu = sy-langu.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZPPFF0004'
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
fm_name = lf_var
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
CALL FUNCTION lf_var
EXPORTING
control_parameters = ls_ssf
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
EXIT.
ENDIF.
ENDFORM. " PRINT
*&---------------------------------------------------------------------*
*& Form GET_ALV_SELECTION
*&---------------------------------------------------------------------*
FORM get_alv_selection CHANGING p_flag TYPE c.
out_tab[] = tem_tab[].
DELETE out_tab[] WHERE cmark <> 'X'.
LOOP AT out_tab.
rm_zeros: out_tab-exidv, out_tab-matnr.
MODIFY out_tab.
ENDLOOP.
IF out_tab[] IS NOT INITIAL.
ELSE.
MESSAGE text-m01 TYPE 'I'.
p_flag = 'X'.
ENDIF.
ENDFORM. " GET_ALV_SELECTION
以下是smartforms获取内表的部分，本程序采用指针的方式获取：
首先在全局定义的类型下面定义和程序内表一样结构的类型，包括表类型如下：
*定义内表的结构类型
TYPES:BEGIN OF typ_db,
exidv TYPE vekp-exidv, "柜号/托号
matnr TYPE char18, "物料编号
box TYPE c,
cmark TYPE c, "选择
venum TYPE vekp-venum, "HU
vhilm TYPE vekp-vhilm, "包装物料
meins TYPE vekp-meins, "单位
velin TYPE vepo-velin, "处理单位项目内容的类型如果是'3'就是箱子可以通过底层处理单位去取数量
unvel TYPE vepo-unvel, "底层处理单位
vemng TYPE vepo-vemng, "数量
maktx TYPE makt-maktx, "物料描述
charg TYPE vepo-charg, "批次
werks TYPE vepo-werks, "工厂
lgort TYPE vepo-lgort, "发出仓库
b1000020 TYPE atwrt, "标称功率
a_lgort TYPE vepo-lgort, "接受仓库
vbeln TYPE char10, "凭证号码
note TYPE char10, "备注
END OF typ_db.
*定义内表类型
TYPES out_ty TYPE typ_db OCCURS 0.
接着就是比较重要的部分了，获取程序中的内表数据
全局定义的初始化下面出去：
DATA: field(50).
FIELD-SYMBOLS: <fs> type any.
field = '(ZPPR0007)out_tab[]'. ”程序名和需要打印用的内表，
ASSIGN (field) TO <fs>. ”把它分配给字符字段
GT_TAB = <fs>. ”赋给我们定义的内表里，此内表是全局定义下的全局数据里定义的。
备注：在自定义GUI的方法是打开函数REUSE_ALV_GRID_DISPLAY下，进入SE80里面，查看该函数的GUI状态，拷贝状态STANDARD_FULLSCREEN到你需要的程序和新建的GUI状态
然后进入你的程序里，打开你的GUI状态，打开应用工具条选择一个空的单元格，选择编辑、insert、separator line、后在该单元格的下一个单元格中输入单元格名称、后双击该单元格、设置图标和功能键、然后可以在下面的功能键区域里可以看到你分配的功能键，到这里自定义GUI状态设计完毕。研究了好久其实很简单。