CREATE TABLE ts (id INT, purchased DATE)
PARTITION BY RANGE( YEAR(purchased) )
SUBPARTITION BY HASH( TO_DAYS(purchased) ) (
PARTITION p0 VALUES LESS THAN (1990) (
SUBPARTITION s0
DATA DIRECTORY = '/disk0/data'
INDEX DIRECTORY = '/disk0/idx',
SUBPARTITION s1
DATA DIRECTORY = '/disk1/data'
INDEX DIRECTORY = '/disk1/idx'
),
PARTITION p1 VALUES LESS THAN (2000) (
SUBPARTITION s2
DATA DIRECTORY = '/disk2/data'
INDEX DIRECTORY = '/disk2/idx',
SUBPARTITION s3
DATA DIRECTORY = '/disk3/data'
INDEX DIRECTORY = '/disk3/idx'
),
PARTITION p2 VALUES LESS THAN MAXVALUE (
SUBPARTITION s4
DATA DIRECTORY = '/disk4/data'
INDEX DIRECTORY = '/disk4/idx',
SUBPARTITION s5
DATA DIRECTORY = '/disk5/data'
INDEX DIRECTORY = '/disk5/idx'
)
);
1.查看Mysql版本是否支持分区
SHOW VARIABLES LIKE '%partition%';
+-------------------+-------+
| Variable_name | Value |
+-------------------+-------+
| have_partitioning | YES |
+-------------------+-------+
如果VALUE 为YES 则支持分区，
2.测试那种存储引擎支持分区
INOODB引擎 www.2cto.com
mysql> Create table engine1(id int) engine=innodb partition by range(id)(partition po values less than(10));
Query OK, 0 rows affected (0.01 sec)
MRG_MYISAM引擎
mysql> Create table engine2(id int) engine=MRG_MYISAM partition by range(id)(partition po values less than(10));
ERROR 1572 (HY000): Engine cannot be used in partitioned tables
blackhole引擎
mysql> Create table engine3(id int) engine=blackhole partition by range(id)(partition po values less than(10));
Query OK, 0 rows affected (0.01 sec)
CSV引擎
mysql> Create table engine4(id int) engine=csv partition by range(id)(partition po values less than(10));
ERROR 1572 (HY000): Engine cannot be used in partitioned tables
Memory引擎 www.2cto.com
mysql> Create table engine5(id int) engine=memory partition by range(id)(partition po values less than(10));
Query OK, 0 rows affected (0.01 sec)
federated引擎
mysql> Create table engine6(id int) engine=federated partition by range(id)(partition po values less than(10));
Query OK, 0 rows affected (0.01 sec)
archive引擎
mysql> Create table engine7(id int) engine=archive partition by range(id)(partition po values less than(10));
Query OK, 0 rows affected (0.01 sec)
myisam 引擎
mysql> Create table engine8(id int) engine=myisam partition by range(id)(partition po values less than(10));
Query OK, 0 rows affected (0.01 sec)
3.Mysql分区表，分区引擎测试
表分区的存储引擎相同
mysql> Create table pengine1(id int) engine=myisam partitionby range(id)(partition po values less than(10) engine=myisam, partitionp1 values less than(20) engine=myisam);
Query OK, 0 rows affected (0.05 sec)
表分区的存储引擎不同
mysql> Create table pengine2(id int) engine=myisam partition byrange(id)(partition po values less than(10) engine=myisam, partition p1values less than(20) engine=innodb);
ERROR 1497 (HY000): The mix of handlers in the partitions is not allowed in this version of MySQL www.2cto.com
同一个分区表中的所有分区必须使用同一个存储引擎，并且存储引擎要和主表的保持一致。
4.分区类型
Range:基于一个连续区间的列值，把多行分配给分区；
LIST：列值匹配一个离散集合；
Hash:基于用户定义的表达式的返回值选择分区，表达式对要插入表中的列值进行计算。这个函数可以包含SQL中有效的，产生非负整
数值的任何表达式。
KEY：类似于HASH分区，区别在于KEY 分区的表达式可以是一列或多列，且MYSQL提供自身的HASH函数。
5.RANGE分区MAXVALUE值 及加分区测试；
创建表 PRANGE，最后分区一个分区值是MAXVALUE
mysql> Create table prange(id int) engine=myisam partition byrange(id)(partition po values less than(10), partition p1 values lessthan(20),partition p2 values less than maxvalue);
Query OK, 0 rows affected (0.06 sec)
加分区
mysql> alter table prange add partition (partition p3 values less than (20));
ERROR 1481 (HY000): MAXVALUE can only be used in last partition definition
在分区P0前面加个分区
mysql> alter table prange add partition (partition p3 values less than (1));
ERROR 1481 (HY000): MAXVALUE can only be used in last partition definition
说明有MAXVALUE值后，直接加分区是不可行的；
创建表PRANGE1，无MAXVALUE值
mysql> Create table prange1(id int) engine=myisam partition byrange(id)(partition po values less than(10), partition p1 values lessthan(20),partition p2 values less than (30)); www.2cto.com
Query OK, 0 rows affected (0.08 sec)
从最大值后加个分区
mysql> alter table prange1 add partition (partition p3 values less than (40));
Query OK, 0 rows affected (0.02 sec)
Records: 0 Duplicates: 0 Warnings: 0
从分区的最小值前加个分区
mysql> alter table prange1 add partition (partition p43 values less than (1));
ERROR 1493 (HY000): VALUES LESS THAN value must be strictly increasing for each partition
由此可见，RANGE 的分区方式在加分区的时候，只能从最大值后面加，而最大值前面不可以添加；
6. 用时间做分区测试
create table ptime2(id int,createdate datetime) engine=myisam partition by range (to_days(createdate))
(partition po values less than (20100801),partition p1 values less than (20100901));
Query OK, 0 rows affected (0.01 sec)
mysql> create table ptime3(id int,createdate datetime) engine=myisam partition by range (createdate)
(partition po values less than (20100801),partition p1 values less than (20100901));
ERROR 1491 (HY000): The PARTITION function returns the wrong type
直接使用时间列不可以，RANGE分区函数返回的列需要是整型。
mysql> create table ptime6(id int,createdate datetime) engine=myisam partition by range (year(createdate))
(partition po values less than (2010),partition p1 values less than (2011));
Query OK, 0 rows affected (0.01 sec) www.2cto.com
使用年函数也可以分区。
7.Mysql可用的分区函数
DAY()
DAYOFMONTH()
DAYOFWEEK()
DAYOFYEAR()
DATEDIFF()
EXTRACT()
HOUR()
MICROSECOND()
MINUTE()
MOD()
MONTH()
QUARTER()
SECOND()
TIME_TO_SEC()
TO_DAYS()
WEEKDAY()
YEAR()
YEARWEEK() 等
当然，还有FLOOR（），CEILING() 等，前提是使用这两个分区函数的分区健必须是整型。
要小心使用其中的一些函数，避免犯逻辑性的错误，引起全表扫描。
比如：
create table ptime11(id int,createdate datetime) engine=myisampartition by range (day(createdate)) (partition po values less than(15),partition p1 values less than (31));
mysql> insert into ptime11 values (1,'2010-06-17');
mysql> explain partitions select count(1) from ptime11 where createdate>'2010-08-17'\G;
*************************** 1. row ***************************
id: 1
select_type: SIMPLE
table: ptime11
partitions: po,p1
type: ALL
possible_keys: NULL
key: NULL
key_len: NULL
ref: NULL
rows: 5
Extra: Using where
1 row in set (0.00 sec)
8.主键及约束测试
分区健不包含在主键内
mysql> create table pprimary(id int,createdatedatetime,primary key(id)) engine=myisam partition by range(day(createdate)) (partition po values less than (15),partition p1values less than (31)); www.2cto.com
ERROR 1503 (HY000): A PRIMARY KEY must include all columns in the table's partitioning function
分区健包含在主键内
mysql> create table pprimary1(id int,createdatedatetime,primary key(id,createdate)) engine=myisam partition by range(day(createdate)) (partition po values less than (15),partition p1values less than (31));
Query OK, 0 rows affected (0.05 sec)
说明分区健必须包含在主键里面。
mysql> create table pprimary2(id int,createdate datetime,uidchar(10),primary key(id,createdate),unique key(uid)) engine=myisampartition by range(to_days(createdate))(partition p0 values less than(20100801),partition p1 values less than (20100901));
ERROR 1503 (HY000): A UNIQUE INDEX must include all columns in the table's partitioning function
说明在表上建约束索引会有问题，必须把约束索引列包含在分区健内。
mysql> create table pprimary3(id int,createdate datetime,uidchar(10),primary key(id,createdate),unique key(createdate))engine=myisam partition by range(to_days(createdate))(partition p0values less than (20100801),partition p1 values less than (20100901));
Query OK, 0 rows affected (0.00 sec)
虽然在表上可以加约束索引，但是只有包含在分区健内，这种情况在实际应用过程中会遇到问题，这个问题点在以后的MYSQL 版本中也许会改进。
9.子分区测试
只有RANGE和LIST分区才能有子分区，每个分区的子分区数量必须相同，
mysql> create table pprimary7(id int,createdate datetime,uidchar(10),primary key(id,createdate)) engine=myisam partition byrange(to_days(createdate)) subpartition byhash(to_days(createdate))(partition p0 values less than (20100801) (subpartition so,subpartition s1) ,partition p1 values less than(20100901) (subpartition s0,subpartition s1)); www.2cto.com
ERROR 1517 (HY000): Duplicate partition name s1
提示了重复的分区名称错误，这和MYSQL5.1帮助文档中的说明有出入，不知道是不是这个问题在某个小版本中修改过。
10.MYSQL分区健NULL值测试；
MYSQL将NULL值视为0.自动插入最小的分区中。
11.MYSQL分区管理测试
mysql> alter table pprimary4 truncate partition p1;
ERROR 1064 (42000): You have an error in your SQL syntax; checkthe manual that corresponds to your MySQL server version for the rightsyntax to use near 'truncate partition p1' at line 1
5.1版本中还不支持这个语法，5.5中已经支持，很好的一个命令；
ALTER TABLE reorganize 可以重新组织分区。