最近需要做一个项目 在arm 架构的linux下 没有桌面环境的情况下拉起 有界面的浏览器使用.
考虑用qt 的界面和 qtwebikt 的库去实现这一系列操作.
本文参考:
Qt移植到ARM Linux教程:http://www.veryarm.com/930.html
成功移植qt软键盘和输入法到arm开发板的qt程序中:http://www.csdn1 2 3.com/html/mycsdn20140110/d1/d1ecf8c322c9447b049f2a71d12f5e87.html
请把上面1 2 3 换成123
关于鼠标不能通用 .
http://blog.chinaunix.net/uid-22666248-id-226373.html
http://wenku.baidu.com/link?url=xmdOvKLdA8W91VQqlNSyYmAw6PsKc6jV5w2mVh6y6lqSgiXbTztGx1P8ewMOAX8vF3JxOGNXseSBRjlQB3N7eBJtfZXYqv7F5vroZwr7TsO
目录：
-
前言
-
下载tslib和qt
- openssl 安装低版本 (1.0.2),如果安装openssl 1.1.0,会出错.
-
交叉编译器机所在linux的环境准备
-
编译tslib
-
编译安装qt
-
移植到Embedded arm
-
单独对qt-everywhere-opensource-src-4.8.6demosrowser 的编译.
存在问题鼠标不能操作(后面发现鼠标存在,只是颜色透明,且移动飞快...),键盘 没有中文输入法 .后续待解决
1,前言
引用
Qt 4.8.6 X11、embeded x86（qvfb运行 ）、embeded arm各个版本编译总结
的话:
QT是跨平台C++图形用户界面应用程序开发框架，可以实现一套源码，多个平台编译运行。可视为平台无关的开发环境。 QT源码可以被编译成很多个版本，这里介绍3个版本：linux桌面版(X11)，embeded x86版，embeded arm版。编译后生成对应平台库文件，使用某平台的编译器编译应用程序时就会链接对应平台的库文件，这样应用程序就能在该平台下运行。 1、X11版（默认版本） X11版本的QT可以在使用X windows系统的linux 桌面操作系统上运行（我用的是Ubuntu），如果不需要开发桌面应用程序，可以不编译。 2、Embeded x86版 这个版本为什么是嵌入版（Embeded）的，因为x86台式机本身也可以当做一个嵌入式系统，但是Embeded x86版的QT不能直接通过X11窗口系统输出画面，这时我们可以借助X11的qvfb工具仿真一个LCD输出设备(QWS环境)，这样Embeded x86应用程序就能在Ubuntu里仿真运行了。要理解这点其实很简单，以Ubuntu为例，Ubuntu的应用程序是以X11协议（X窗口系统）输送到屏幕显示界面的，X server负责图形显示，应用程序负责计算、修改数据，两者基于某种协议通信。对于嵌入式linux，qt应用程序也需要一个窗口系统才能显示，但是嵌入式linux系统不能使用X11（太耗资源了），奇趣公司就专门开发了一个qws（QT windows system）， 应用程序按照协议向qws发送数据，服务端负责显示数据。现在，qvfb就是QWS的显示设备。 另外请注意，Embeded x86版的QT应用程序是不能在arm开发板上运行的。 embeded x86版并不是我们的开发板最终使用的QT库，编译这个版本只是为了方便我们调试， 先在ubuntu中仿真运行，看看界面，不必下载到开发板的文件系统中运行，两者的运行效果除了界面基本相同，其他方面还是有差异的。 3、Embeded arm版 这个版本才是我们在arm开发板上运行的版本。 我们做嵌入式开发，其实只需编译第3版本的QT（Embeded arm版），编译X11 版本的目的只是方便我个人学习QT，编译Embeded x86只是为了体验仿真效果。
但是嵌入式linux系统不能使用X11（太耗资源了），奇趣公司就专门开发了一个qws（QT windows system）， 应用程序按照协议向qws发送数据，服务端负责显示数据。现在，qvfb就是QWS的显示设备。
所以后面才有了 ./qtwebkitdemo -qws 的方式运行.
2,下载tslib和qt
Tslib是一个开源的程序，能够为触摸屏驱动获得的采样提供诸如滤波、去抖、校准等功能，通常作为触摸屏驱动的适配层，为上层的应用提供了一个统一的接口。
在采用触摸屏的移动终端中，触摸屏性能的调试是个重要问题之一，因为电磁噪声的缘故，触摸屏容易存在点击不准确、有抖动等问题。
到 github 下载 tslib最新版，地址：https://github.com/kergoth/tslib，下载后文件名为：tslib-master.zip。
到 Qt 官网下载合适的 Qt 版本，地址：http://download.qt-project.org/archive/qt/。本教程以 4.8.6为例，下载的压缩包名称为： qt-everywhere-opensource-src-4.8.6.tar.gz。
之所以用qt 4.8.6这个稳定版本是因为 用qt 5.5.0 会报
pragma GCC diagnostic 这个错.
后面发现是gcc 版本低于4.6 .
../../include/QtBluetooth/../../src/bluetooth/qbluetoothdevicediscoveryagent.h:49:16: warning: expected [error|warning|ignored] after '#pragma GCC diagnostic'
qbluetoothuuid.cpp:590:1: error: #pragma GCC diagnostic not allowed inside functions
qbluetoothuuid.cpp:591:1: error: #pragma GCC diagnostic not allowed inside functions
qbluetoothuuid.cpp:592:79: warning: dereferencing type-punned pointer will break strict-aliasing rules
qbluetoothuuid.cpp:593:79: warning: dereferencing type-punned pointer will break strict-aliasing rules
qbluetoothuuid.cpp:594:79: warning: dereferencing type-punned pointer will break strict-aliasing rules
qbluetoothuuid.cpp:595:1: error: #pragma GCC diagnostic not allowed inside functions
3,openssl 安装低版本 (1.0.2),如果安装openssl 1.1.0 ,会出错.
https://github.com/Ultimaker/cura-build/issues/105
安装openssl1.1.0版本会报,
/usr/include/openssl/ossl_typ.h:119:16: note: forward declaration of ‘X509 {aka struct x509_st}’ typedef struct x509_st X509;
的错( invalid use of incomplete type x509)
4,交叉编译器机所在linux的环境准备
sudo apt-get install automake autoconf libtool m4 sudo apt-get install libX11-dev libXext-dev libXtst-dev libXrender-dev
安装交叉编译器
本文全用 arm-linux-g++ v4.5.1
安装方法,参考:
arm-linux-gcc-4.5.1的安装方法:http://blog.sina.com.cn/s/blog_68f3489201014a86.html
Ubuntu 13.4 安装Arm-linux-gcc 详细过程:http://lieyan.lofter.com/post/225d54_afc506
root@debian:/disk2# arm-linux-gcc -v Using built-in specs. COLLECT_GCC=arm-linux-gcc COLLECT_LTO_WRAPPER=/usr/arm-linux-g++_4.5.1/4.5.1/bin/../libexec/gcc/arm-none-linux-gnueabi/4.5.1/lto-wrapper Target: arm-none-linux-gnueabi Configured with: /work/toolchain/build/src/gcc-4.5.1/configure --build=i686-build_pc-linux-gnu --host=i686-build_pc-linux-gnu --target=arm-none-linux-gnueabi --prefix=/opt/FriendlyARM/toolschain/4.5.1 --with-sysroot=/opt/FriendlyARM/toolschain/4.5.1/arm-none-linux-gnueabi/sys-root --enable-languages=c,c++ --disable-multilib --with-cpu=arm1176jzf-s --with-tune=arm1176jzf-s --with-fpu=vfp --with-float=softfp --with-pkgversion=ctng-1.8.1-FA --with-bugurl=http://www.arm9.net/ --disable-sjlj-exceptions --enable-__cxa_atexit --disable-libmudflap --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --with-gmp=/work/toolchain/build/arm-none-linux-gnueabi/build/static --with-mpfr=/work/toolchain/build/arm-none-linux-gnueabi/build/static --with-ppl=/work/toolchain/build/arm-none-linux-gnueabi/build/static --with-cloog=/work/toolchain/build/arm-none-linux-gnueabi/build/static --with-mpc=/work/toolchain/build/arm-none-linux-gnueabi/build/static --with-libelf=/work/toolchain/build/arm-none-linux-gnueabi/build/static --enable-threads=posix --with-local-prefix=/opt/FriendlyARM/toolschain/4.5.1/arm-none-linux-gnueabi/sys-root --disable-nls --enable-symvers=gnu --enable-c99 --enable-long-long Thread model: posix gcc version 4.5.1 (ctng-1.8.1-FA) root@debian:/disk2#
5, 编译tslib
unzip tslib-master.zip cd tslib-master ./autogen.sh $ ./configure CC=arm-linux-gcc CXX=arm-linux-g++ --host=arm-none-linux-gnueabi --prefix=/usr/local/tslib ac_cv_func_malloc_0_nonnull=yes
make
sudo make install
完成后，tslib会按安装到主机 /usr/local/tslib 目录下。
进入下一步之前，先将主机中 /usr/local/tslib/etc/ts.conf 文件第二行“#module_raw input”的注释去掉，变为“module_raw input”，注意一定要顶格。
6,编译安装qt
难啃的骨头终于开始了. !!!
tar xjvf qt-everywhere-opensource-src-4.8.6.tar.bz2 cd qt-everywhere-opensource-src-4.8.6
打开 qt-everywhere-opensource-src-4.8.6mkspecsqwslinux-arm-g++ 目录下的 qmake.conf (请先备份)
注:
关于qws 之前一直不明所以....
还记得文章开头的
"
但是嵌入式linux系统不能使用X11（太耗资源了），奇趣公司就专门开发了一个qws（QT windows system）， 应用程序按照协议向qws发送数据，服务端负责显示数据。现在，qvfb就是QWS的显示设备。
所以后面才有了 ./qtwebkitdemo -qws 的方式运行.
"
所以,,恍然大W...
原内容:
# # qmake configuration for building with arm-linux-g++ # include(../../common/linux.conf) include(../../common/gcc-base-unix.conf) include(../../common/g++-unix.conf) include(../../common/qws.conf) # modifications to g++.conf QMAKE_CC = arm-linux-gcc QMAKE_CXX = arm-linux-g++ QMAKE_LINK = arm-linux-g++ QMAKE_LINK_SHLIB = arm-linux-g++ # modifications to linux.conf QMAKE_AR = arm-linux-ar cqs QMAKE_OBJCOPY = arm-linux-objcopy QMAKE_STRIP = arm-linux-strip load(qt_config)
改成
# # qmake configuration for building with arm-linux-g++ # include(../../common/linux.conf) include(../../common/gcc-base-unix.conf) include(../../common/g++-unix.conf) include(../../common/qws.conf) # modifications to g++.conf QMAKE_CC = /usr/arm-linux-g++_4.5.1/4.5.1/bin/arm-linux-gcc -lts QMAKE_CXX = /usr/arm-linux-g++_4.5.1/4.5.1/bin/arm-linux-g++ -lts QMAKE_LINK = /usr/arm-linux-g++_4.5.1/4.5.1/bin/arm-linux-g++ -lts QMAKE_LINK_SHLIB = /usr/arm-linux-g++_4.5.1/4.5.1/bin/arm-linux-g++ -lts # modifications to linux.conf QMAKE_AR = /usr/arm-linux-g++_4.5.1/4.5.1/bin/arm-linux-ar cqs QMAKE_OBJCOPY = /usr/arm-linux-g++_4.5.1/4.5.1/bin/arm-linux-objcopy QMAKE_STRIP = /usr/arm-linux-g++_4.5.1/4.5.1/bin/arm-linux-strip load(qt_config)
为防止找不到路径,所以直接全路径了. 简单粗暴.
再来看看
./configure --help
root@debian:/disk2/qt-everywhere-opensource-src-4.8.6# ./configure --help
Usage: configure [-h] [-prefix <dir>] [-prefix-install] [-bindir <dir>] [-libdir <dir>]
[-docdir <dir>] [-headerdir <dir>] [-plugindir <dir> ] [-importdir <dir>] [-datadir <dir>]
[-translationdir <dir>] [-sysconfdir <dir>] [-examplesdir <dir>]
[-demosdir <dir>] [-buildkey <key>] [-release] [-debug]
[-debug-and-release] [-developer-build] [-shared] [-static] [-no-fast] [-fast] [-no-largefile]
[-largefile] [-no-exceptions] [-exceptions] [-no-accessibility]
[-accessibility] [-no-stl] [-stl] [-no-sql-<driver>] [-sql-<driver>]
[-plugin-sql-<driver>] [-system-sqlite] [-no-qt3support] [-qt3support]
[-platform] [-D <string>] [-I <string>] [-L <string>] [-help]
[-qt-zlib] [-system-zlib] [-no-gif] [-no-libtiff] [-qt-libtiff] [-system-libtiff]
[-no-libpng] [-qt-libpng] [-system-libpng] [-no-libmng] [-qt-libmng]
[-system-libmng] [-no-libjpeg] [-qt-libjpeg] [-system-libjpeg] [-make <part>]
[-nomake <part>] [-R <string>] [-l <string>] [-no-rpath] [-rpath] [-continue]
[-verbose] [-v] [-silent] [-no-nis] [-nis] [-no-cups] [-cups] [-no-iconv]
[-iconv] [-no-pch] [-pch] [-no-dbus] [-dbus] [-dbus-linked] [-no-gui]
[-no-separate-debug-info] [-no-mmx] [-no-3dnow] [-no-sse] [-no-sse2]
[-no-sse3] [-no-ssse3] [-no-sse4.1] [-no-sse4.2] [-no-avx] [-no-neon]
[-qtnamespace <namespace>] [-qtlibinfix <infix>] [-separate-debug-info] [-armfpa]
[-no-optimized-qmake] [-optimized-qmake] [-no-xmlpatterns] [-xmlpatterns]
[-no-multimedia] [-multimedia] [-no-phonon] [-phonon] [-no-phonon-backend] [-phonon-backend]
[-no-media-backend] [-media-backend] [-no-audio-backend] [-audio-backend]
[-no-openssl] [-openssl] [-openssl-linked]
[-no-gtkstyle] [-gtkstyle] [-no-svg] [-svg] [-no-webkit] [-webkit] [-webkit-debug]
[-no-javascript-jit] [-javascript-jit]
[-no-script] [-script] [-no-scripttools] [-scripttools]
[-no-declarative] [-declarative] [-no-declarative-debug] [-declarative-debug]
[additional platform specific options (see below)]
Installation options:
-qpa [name] ......... This will enable the QPA build.
QPA is a window system agnostic implementation of Qt.
If [name] is given, sets the default QPA platform (e.g xcb, cocoa).
These are optional, but you may specify install directories.
-prefix <dir> ...... This will install everything relative to <dir>
(default /usr/local/Trolltech/QtEmbedded-4.8.6)
-hostprefix [dir] .. Tools and libraries needed when developing
applications are installed in [dir]. If [dir] is
not given, the current build directory will be used.
* -prefix-install .... Force a sandboxed "local" installation of
Qt. This will install into
/usr/local/Trolltech/QtEmbedded-4.8.6, if this option is
disabled then some platforms will attempt a
"system" install by placing default values
in a system location other than PREFIX.
You may use these to separate different parts of the install:
-bindir <dir> ......... Executables will be installed to <dir>
(default PREFIX/bin)
-libdir <dir> ......... Libraries will be installed to <dir>
(default PREFIX/lib)
-docdir <dir> ......... Documentation will be installed to <dir>
(default PREFIX/doc)
-headerdir <dir> ...... Headers will be installed to <dir>
(default PREFIX/include)
-plugindir <dir> ...... Plugins will be installed to <dir>
(default PREFIX/plugins)
-importdir <dir> ...... Imports for QML will be installed to <dir>
(default PREFIX/imports)
-datadir <dir> ........ Data used by Qt programs will be installed to <dir>
(default PREFIX)
-translationdir <dir> . Translations of Qt programs will be installed to <dir>
(default PREFIX/translations)
-sysconfdir <dir> ..... Settings used by Qt programs will be looked for in <dir>
(default PREFIX/etc/settings)
-examplesdir <dir> .... Examples will be installed to <dir>
(default PREFIX/examples)
-demosdir <dir> ....... Demos will be installed to <dir>
(default PREFIX/demos)
You may use these options to turn on strict plugin loading.
-buildkey <key> .... Build the Qt library and plugins using the specified
<key>. When the library loads plugins, it will only
load those that have a matching key.
Configure options:
The defaults (*) are usually acceptable. A plus (+) denotes a default value
that needs to be evaluated. If the evaluation succeeds, the feature is
included. Here is a short explanation of each option:
* -release ........... Compile and link Qt with debugging turned off.
-debug ............. Compile and link Qt with debugging turned on.
-debug-and-release . Compile and link two versions of Qt, with and without
debugging turned on (Mac only).
-developer-build ... Compile and link Qt with Qt developer options (including auto-tests exporting)
-opensource ........ Compile and link the Open-Source Edition of Qt.
-commercial ........ Compile and link the Commercial Edition of Qt.
* -shared ............ Create and use shared Qt libraries.
-static ............ Create and use static Qt libraries.
* -no-fast ........... Configure Qt normally by generating Makefiles for all
project files.
-fast .............. Configure Qt quickly by generating Makefiles only for
library and subdirectory targets. All other Makefiles
are created as wrappers, which will in turn run qmake.
-no-largefile ...... Disables large file support.
+ -largefile ......... Enables Qt to access files larger than 4 GB.
* -no-system-proxies . Do not use system network proxies by default.
-system-proxies .... Use system network proxies by default.
* -no-exceptions ..... Disable exceptions on compilers that support it.
-exceptions ........ Enable exceptions on compilers that support it.
-no-accessibility .. Do not compile Accessibility support.
* -accessibility ..... Compile Accessibility support.
-no-stl ............ Do not compile STL support.
* -stl ............... Compile STL support.
-no-sql-<driver> ... Disable SQL <driver> entirely.
-qt-sql-<driver> ... Enable a SQL <driver> in the QtSql library, by default
none are turned on.
-plugin-sql-<driver> Enable SQL <driver> as a plugin to be linked to
at run time.
Possible values for <driver>:
[ db2 ibase mysql oci odbc psql sqlite sqlite2 sqlite_symbian symsql tds ]
-system-sqlite ..... Use sqlite from the operating system.
-no-qt3support ..... Disables the Qt 3 support functionality.
* -qt3support ........ Enables the Qt 3 support functionality.
-no-xmlpatterns .... Do not build the QtXmlPatterns module.
+ -xmlpatterns ....... Build the QtXmlPatterns module.
QtXmlPatterns is built if a decent C++ compiler
is used and exceptions are enabled.
-no-multimedia ..... Do not build the QtMultimedia module.
+ -multimedia ........ Build the QtMultimedia module.
-no-audio-backend .. Do not build the platform audio backend into QtMultimedia.
+ -audio-backend ..... Build the platform audio backend into QtMultimedia if available.
-no-phonon ......... Do not build the Phonon module.
+ -phonon ............ Build the Phonon module.
Phonon is built if a decent C++ compiler is used.
-no-phonon-backend.. Do not build the platform phonon plugin.
+ -phonon-backend..... Build the platform phonon plugin.
-no-svg ............ Do not build the SVG module.
+ -svg ............... Build the SVG module.
-no-webkit ......... Do not build the WebKit module.
+ -webkit ............ Build the WebKit module.
WebKit is built if a decent C++ compiler is used.
-webkit-debug ...... Build the WebKit module with debug symbols.
-no-javascript-jit . Do not build the JavaScriptCore JIT compiler.
+ -javascript-jit .... Build the JavaScriptCore JIT compiler.
-no-script ......... Do not build the QtScript module.
+ -script ............ Build the QtScript module.
-no-scripttools .... Do not build the QtScriptTools module.
+ -scripttools ....... Build the QtScriptTools module.
-no-declarative ..... Do not build the declarative module.
+ -declarative ....... Build the declarative module.
-no-declarative-debug ..... Do not build the declarative debugging support.
+ -declarative-debug ....... Build the declarative debugging support.
-platform target ... The operating system and compiler you are building
on (qws/linux-x86_64-g++).
See the README file for a list of supported
operating systems and compilers.
-no-mmx ............ Do not compile with use of MMX instructions.
-no-3dnow .......... Do not compile with use of 3DNOW instructions.
-no-sse ............ Do not compile with use of SSE instructions.
-no-sse2 ........... Do not compile with use of SSE2 instructions.
-no-sse3 ........... Do not compile with use of SSE3 instructions.
-no-ssse3 .......... Do not compile with use of SSSE3 instructions.
-no-sse4.1.......... Do not compile with use of SSE4.1 instructions.
-no-sse4.2.......... Do not compile with use of SSE4.2 instructions.
-no-avx ............ Do not compile with use of AVX instructions.
-no-neon ........... Do not compile with use of NEON instructions.
-qtnamespace <name> Wraps all Qt library code in 'namespace <name> {...}'.
-qtlibinfix <infix> Renames all libQt*.so to libQt*<infix>.so.
-D <string> ........ Add an explicit define to the preprocessor.
-I <string> ........ Add an explicit include path.
-L <string> ........ Add an explicit library path.
-help, -h .......... Display this information.
Third Party Libraries:
-qt-zlib ........... Use the zlib bundled with Qt.
+ -system-zlib ....... Use zlib from the operating system.
See http://www.gzip.org/zlib
-no-gif ............ Do not compile GIF reading support.
-no-libtiff ........ Do not compile TIFF support.
-qt-libtiff ........ Use the libtiff bundled with Qt.
+ -system-libtiff .... Use libtiff from the operating system.
See http://www.libtiff.org
-no-libpng ......... Do not compile PNG support.
-qt-libpng ......... Use the libpng bundled with Qt.
+ -system-libpng ..... Use libpng from the operating system.
See http://www.libpng.org/pub/png
-no-libmng ......... Do not compile MNG support.
-qt-libmng ......... Use the libmng bundled with Qt.
+ -system-libmng ..... Use libmng from the operating system.
See http://www.libmng.com
-no-libjpeg ........ Do not compile JPEG support.
-qt-libjpeg ........ Use the libjpeg bundled with Qt.
+ -system-libjpeg .... Use libjpeg from the operating system.
See http://www.ijg.org
-no-openssl ........ Do not compile support for OpenSSL.
+ -openssl ........... Enable run-time OpenSSL support.
-openssl-linked .... Enabled linked OpenSSL support.
-ptmalloc .......... Override the system memory allocator with ptmalloc.
(Experimental.)
Additional options:
-make <part> ....... Add part to the list of parts to be built at make time.
(libs tools examples demos docs translations)
-nomake <part> ..... Exclude part from the list of parts to be built.
-R <string> ........ Add an explicit runtime library path to the Qt
libraries.
-l <string> ........ Add an explicit library.
-no-rpath .......... Do not use the library install path as a runtime
library path.
+ -rpath ............. Link Qt libraries and executables using the library
install path as a runtime library path. Equivalent
to -R install_libpath
-continue .......... Continue as far as possible if an error occurs.
-verbose, -v ....... Print verbose information about each step of the
configure process.
-silent ............ Reduce the build output so that warnings and errors
can be seen more easily.
* -no-optimized-qmake ... Do not build qmake optimized.
-optimized-qmake ...... Build qmake optimized.
-no-gui ............ Don't build the Qt GUI library
-no-nis ............ Do not compile NIS support.
* -nis ............... Compile NIS support.
-no-cups ........... Do not compile CUPS support.
* -cups .............. Compile CUPS support.
Requires cups/cups.h and libcups.so.2.
-no-iconv .......... Do not compile support for iconv(3).
* -iconv ............. Compile support for iconv(3).
-no-pch ............ Do not use precompiled header support.
* -pch ............... Use precompiled header support.
-no-dbus ........... Do not compile the QtDBus module.
+ -dbus .............. Compile the QtDBus module and dynamically load libdbus-1.
-dbus-linked ....... Compile the QtDBus module and link to libdbus-1.
-reduce-relocations ..... Reduce relocations in the libraries through extra
linker optimizations (Qt/X11 and Qt for Embedded Linux only;
experimental; needs GNU ld >= 2.18).
* -no-separate-debug-info . Do not store debug information in a separate file.
-separate-debug-info .... Strip debug information into a separate file.
Qt for Embedded Linux:
-embedded <arch> .... This will enable the embedded build, you must have a
proper license for this switch to work.
Example values for <arch>: arm mips x86 generic
-xplatform target ... The target platform when cross-compiling.
-device-option <key=value> ... Add device specific options for the device mkspec
(experimental)
-no-feature-<feature> Do not compile in <feature>.
-feature-<feature> .. Compile in <feature>. The available features
are described in src/corelib/global/qfeatures.txt
-armfpa ............. Target platform uses the ARM-FPA floating point format.
-no-armfpa .......... Target platform does not use the ARM-FPA floating point format.
The floating point format is usually autodetected by configure. Use this
to override the detected value.
-little-endian ...... Target platform is little endian (LSB first).
-big-endian ......... Target platform is big endian (MSB first).
-host-little-endian . Host platform is little endian (LSB first).
-host-big-endian .... Host platform is big endian (MSB first).
You only need to specify the endianness when
cross-compiling, otherwise the host
endianness will be used.
-no-freetype ........ Do not compile in Freetype2 support.
-qt-freetype ........ Use the libfreetype bundled with Qt.
* -system-freetype .... Use libfreetype from the operating system.
See http://www.freetype.org/
-qconfig local ...... Use src/corelib/global/qconfig-local.h rather than the
default (full).
-no-opengl .......... Do not support OpenGL.
-opengl <api> ....... Enable OpenGL ES support
With no parameter, this will attempt to auto-detect OpenGL ES 1.x
or 2.x, or regular desktop OpenGL.
Use es1 or es2 for <api> to override auto-detection.
-depths <list> ...... Comma-separated list of supported bit-per-pixel
depths, from: 1, 4, 8, 12, 15, 16, 18, 24, 32 and 'all'.
-qt-decoration-<style> ....Enable a decoration <style> in the QtGui library,
by default all available decorations are on.
Possible values for <style>: [ styled windows default ]
-plugin-decoration-<style> Enable decoration <style> as a plugin to be
linked to at run time.
Possible values for <style>: [ default styled windows ]
-no-decoration-<style> ....Disable decoration <style> entirely.
Possible values for <style>: [ styled windows default ]
-qt-gfx-<driver> ... Enable a graphics <driver> in the QtGui library.
Possible values for <driver>: [ linuxfb transformed qvfb vnc multiscreen directfb qnx integrityfb ]
-plugin-gfx-<driver> Enable graphics <driver> as a plugin to be
linked to at run time.
Possible values for <driver>: [ ahi directfb eglnullws linuxfb powervr qvfb transformed vnc ]
-no-gfx-<driver> ... Disable graphics <driver> entirely.
Possible values for <driver>: [ linuxfb transformed qvfb vnc multiscreen directfb qnx integrityfb ]
-qt-kbd-<driver> ... Enable a keyboard <driver> in the QtGui library.
Possible values for <driver>: [ tty linuxinput qvfb qnx integrity ]
-plugin-kbd-<driver> Enable keyboard <driver> as a plugin to be linked to
at runtime.
Possible values for <driver>: [ linuxinput ]
-no-kbd-<driver> ... Disable keyboard <driver> entirely.
Possible values for <driver>: [ tty linuxinput qvfb qnx integrity ]
-qt-mouse-<driver> ... Enable a mouse <driver> in the QtGui library.
Possible values for <driver>: [ pc linuxtp linuxinput tslib qvfb qnx integrity ]
-plugin-mouse-<driver> Enable mouse <driver> as a plugin to be linked to
at runtime.
Possible values for <driver>: [ linuxtp pc tslib ]
-no-mouse-<driver> ... Disable mouse <driver> entirely.
Possible values for <driver>: [ pc linuxtp linuxinput tslib qvfb qnx integrity ]
-iwmmxt ............ Compile using the iWMMXt instruction set
(available on some XScale CPUs).
-no-glib ........... Do not compile Glib support.
+ -glib .............. Compile Glib support.
root@debian:/disk2/qt-everywhere-opensource-src-4.8.6#
关于 -prefix -prefix-install 如果不指定 :
编译后在 embedded arm 中要把 lib bin 放在 /usr/local/Trolltech/Qt-4.8.6 这个目录下,不存在就需要创建
-prefix <dir> ...... This will install everything relative to <dir>
(default /usr/local/Trolltech/Qt-4.8.6)
* -prefix-install .... Force a sandboxed "local" installation of
Qt. This will install into
/usr/local/Trolltech/Qt-4.8.6, if this option is
disabled then some platforms will attempt a
"system" install by placing default values
in a system location other than PREFIX.
我的./configure
-I后面指定上一步tslib的include路径，-L后面指定上一步tslib的lib路径，
./configure -opensource -release -shared -Declarative -importdir /opt/imports -fast -no-largefile -qt-sql-sqlite -qt3support -exceptions -xmlpatterns -no-glib -no-phonon -no-mmx -no-3dnow -no-sse -no-sse2 -svg -webkit -qt-zlib -qt-libtiff -qt-libpng -qt-libjpeg -make libs -make tools -make examples -make demos -make translations -nomake docs -no-nis -no-cups -iconv -no-dbus -xplatform qws/linux-arm-g++ -embedded arm -little-endian -qt-freetype -depths 16,24,32 -qt-gfx-linuxfb -armfpa -DQT_QLOCALE_USES_FCVT -DQT_NO_QWS_CURSOR -no-pch -I/usr/local/tslib/include -L/usr/local/tslib/lib -confirm-license
这儿要改为:
./configure -opensource -release -shared -Declarative -importdir /opt/imports -fast -no-largefile -qt-sql-sqlite -qt3support -exceptions -xmlpatterns -no-glib -no-phonon -no-mmx -no-3dnow -no-sse -no-sse2 -svg -webkit -qt-zlib -qt-libtiff -qt-libpng -qt-libjpeg -make libs -make tools -make examples -make demos -make translations -nomake docs -no-nis -no-cups -iconv -no-dbus -xplatform qws/linux-arm-g++ -embedded arm -little-endian -qt-freetype -depths all -qt-gfx-linuxfb -armfpa -DQT_QLOCALE_USES_FCVT -DQT_NO_QWS_CURSOR -no-pch -I/usr/local/tslib/include -L/usr/local/tslib/lib -confirm-license
这儿的重要参数就是,其实都是重要参数. 这个需要看的比较多.
需要编译webkit,demos 因为demos 包含了我们需要的browser示例.
如果出现以下错误,则是 mkspecs/qws/linux-arm-g++/qmake.conf 中编译器没找到路径,所以用全路径啊.:
The tslib functionality test failed!
You might need to modify the include and library search paths by editing
QMAKE_INCDIR and QMAKE_LIBDIR in
qt-everywhere-opensource-src-4.8.6/mkspecs/qws/linux-arm-g++.
编译安装:
make
make install
这儿是漫长的,差不多要5个小时.
make完成后.
打包 exe和 lib .本文直接 把 qt-everywhere-opensource-src-4.8.6demosrowserrowser 这个exe放在lib目录下,方便 embedded arm 下使用.
注意 lib下的 所有都有拷贝走,包含 ./lib/fonts 这个字体目录.程序需要.
root@debian:/disk2/qt-everywhere-opensource-src-4.8.6# ls -l lib total 80204 -rw-r--r-- 1 root root 711791 Aug 23 05:56 browser drwxr-xr-x 2 1001 1001 4096 Apr 10 2014 fonts -rw-r--r-- 1 root root 521 Aug 22 13:10 libpvrQWSWSEGL.prl -rw-r--r-- 1 root root 788 Aug 22 13:10 libQAxContainer.prl -rw-r--r-- 1 root root 755 Aug 22 13:10 libQAxServer.prl -rw-r--r-- 1 root root 899 Aug 25 20:07 libQt3Support.la -rw-r--r-- 1 root root 863 Aug 25 20:07 libQt3Support.prl lrwxrwxrwx 1 root root 22 Aug 25 03:33 libQt3Support.so -> libQt3Support.so.4.8.6 lrwxrwxrwx 1 root root 22 Aug 25 03:33 libQt3Support.so.4 -> libQt3Support.so.4.8.6 lrwxrwxrwx 1 root root 22 Aug 25 03:33 libQt3Support.so.4.8 -> libQt3Support.so.4.8.6 -rwxr-xr-x 1 root root 3364328 Aug 25 03:33 libQt3Support.so.4.8.6 -rw-r--r-- 1 root root 868 Aug 25 20:08 libQtCLucene.la -rw-r--r-- 1 root root 849 Aug 25 20:08 libQtCLucene.prl lrwxrwxrwx 1 root root 21 Aug 25 06:13 libQtCLucene.so -> libQtCLucene.so.4.8.6 lrwxrwxrwx 1 root root 21 Aug 25 06:13 libQtCLucene.so.4 -> libQtCLucene.so.4.8.6 lrwxrwxrwx 1 root root 21 Aug 25 06:13 libQtCLucene.so.4.8 -> libQtCLucene.so.4.8.6 -rwxr-xr-x 1 root root 1541589 Aug 25 06:13 libQtCLucene.so.4.8.6 -rw-r--r-- 1 root root 755 Aug 25 20:07 libQtCore.la -rw-r--r-- 1 root root 723 Aug 25 20:07 libQtCore.prl lrwxrwxrwx 1 root root 18 Aug 25 02:59 libQtCore.so -> libQtCore.so.4.8.6 lrwxrwxrwx 1 root root 18 Aug 25 02:59 libQtCore.so.4 -> libQtCore.so.4.8.6 lrwxrwxrwx 1 root root 18 Aug 25 02:59 libQtCore.so.4.8 -> libQtCore.so.4.8.6 -rwxr-xr-x 1 root root 4026474 Aug 25 02:59 libQtCore.so.4.8.6 -rw-r--r-- 1 root root 843 Aug 22 13:10 libQtDBus.la -rw-r--r-- 1 root root 821 Aug 22 13:10 libQtDBus.prl -rw-r--r-- 1 root root 947 Aug 25 20:07 libQtDeclarative.la -rw-r--r-- 1 root root 881 Aug 25 20:07 libQtDeclarative.prl lrwxrwxrwx 1 root root 25 Aug 25 04:04 libQtDeclarative.so -> libQtDeclarative.so.4.8.6 lrwxrwxrwx 1 root root 25 Aug 25 04:04 libQtDeclarative.so.4 -> libQtDeclarative.so.4.8.6 lrwxrwxrwx 1 root root 25 Aug 25 04:04 libQtDeclarative.so.4.8 -> libQtDeclarative.so.4.8.6 -rwxr-xr-x 1 root root 4694510 Aug 25 04:04 libQtDeclarative.so.4.8.6 -rw-r--r-- 1 root root 604 Aug 25 20:08 libQtDesignerComponents.prl lrwxrwxrwx 1 root root 32 Aug 25 06:34 libQtDesignerComponents.so -> libQtDesignerComponents.so.4.8.6 lrwxrwxrwx 1 root root 32 Aug 25 06:34 libQtDesignerComponents.so.4 -> libQtDesignerComponents.so.4.8.6 lrwxrwxrwx 1 root root 32 Aug 25 06:34 libQtDesignerComponents.so.4.8 -> libQtDesignerComponents.so.4.8.6 -rwxr-xr-x 1 root root 3491318 Aug 25 06:34 libQtDesignerComponents.so.4.8.6 -rw-r--r-- 1 root root 548 Aug 25 20:08 libQtDesigner.prl lrwxrwxrwx 1 root root 22 Aug 25 06:27 libQtDesigner.so -> libQtDesigner.so.4.8.6 lrwxrwxrwx 1 root root 22 Aug 25 06:27 libQtDesigner.so.4 -> libQtDesigner.so.4.8.6 lrwxrwxrwx 1 root root 22 Aug 25 06:27 libQtDesigner.so.4.8 -> libQtDesigner.so.4.8.6 -rwxr-xr-x 1 root root 6113245 Aug 25 06:27 libQtDesigner.so.4.8.6 -rw-r--r-- 1 root root 840 Aug 25 20:07 libQtGui.la -rw-r--r-- 1 root root 815 Aug 25 20:07 libQtGui.prl lrwxrwxrwx 1 root root 17 Aug 25 03:28 libQtGui.so -> libQtGui.so.4.8.6 lrwxrwxrwx 1 root root 17 Aug 25 03:28 libQtGui.so.4 -> libQtGui.so.4.8.6 lrwxrwxrwx 1 root root 17 Aug 25 03:28 libQtGui.so.4.8 -> libQtGui.so.4.8.6 -rwxr-xr-x 1 root root 12834491 Aug 25 03:28 libQtGui.so.4.8.6 -rw-r--r-- 1 root root 863 Aug 25 20:08 libQtHelp.la -rw-r--r-- 1 root root 846 Aug 25 20:08 libQtHelp.prl lrwxrwxrwx 1 root root 18 Aug 25 06:15 libQtHelp.so -> libQtHelp.so.4.8.6 lrwxrwxrwx 1 root root 18 Aug 25 06:15 libQtHelp.so.4 -> libQtHelp.so.4.8.6 lrwxrwxrwx 1 root root 18 Aug 25 06:15 libQtHelp.so.4.8 -> libQtHelp.so.4.8.6 -rwxr-xr-x 1 root root 651089 Aug 25 06:15 libQtHelp.so.4.8.6 -rw-r--r-- 1 root root 1013 Aug 22 13:10 libQtMeeGoGraphicsSystemHelper.la -rw-r--r-- 1 root root 903 Aug 22 13:10 libQtMeeGoGraphicsSystemHelper.prl -rw-r--r-- 1 root root 897 Aug 25 20:07 libQtMultimedia.la -rw-r--r-- 1 root root 835 Aug 25 20:07 libQtMultimedia.prl lrwxrwxrwx 1 root root 24 Aug 25 03:46 libQtMultimedia.so -> libQtMultimedia.so.4.8.6 lrwxrwxrwx 1 root root 24 Aug 25 03:46 libQtMultimedia.so.4 -> libQtMultimedia.so.4.8.6 lrwxrwxrwx 1 root root 24 Aug 25 03:46 libQtMultimedia.so.4.8 -> libQtMultimedia.so.4.8.6 -rwxr-xr-x 1 root root 221760 Aug 25 03:46 libQtMultimedia.so.4.8.6 -rw-r--r-- 1 root root 856 Aug 25 20:07 libQtNetwork.la -rw-r--r-- 1 root root 806 Aug 25 20:07 libQtNetwork.prl lrwxrwxrwx 1 root root 21 Aug 25 03:02 libQtNetwork.so -> libQtNetwork.so.4.8.6 lrwxrwxrwx 1 root root 21 Aug 25 03:02 libQtNetwork.so.4 -> libQtNetwork.so.4.8.6 lrwxrwxrwx 1 root root 21 Aug 25 03:02 libQtNetwork.so.4.8 -> libQtNetwork.so.4.8.6 -rwxr-xr-x 1 root root 1606434 Aug 25 03:02 libQtNetwork.so.4.8.6 -rw-r--r-- 1 root root 869 Aug 22 13:10 libQtOpenGL.la -rw-r--r-- 1 root root 824 Aug 22 13:10 libQtOpenGL.prl -rw-r--r-- 1 root root 869 Aug 22 13:10 libQtOpenVG.la -rw-r--r-- 1 root root 824 Aug 22 13:10 libQtOpenVG.prl -rw-r--r-- 1 root root 516 Aug 22 13:10 libQtRemote.prl -rw-r--r-- 1 root root 849 Aug 25 20:07 libQtScript.la -rw-r--r-- 1 root root 831 Aug 25 20:07 libQtScript.prl lrwxrwxrwx 1 root root 20 Aug 25 03:55 libQtScript.so -> libQtScript.so.4.8.6 lrwxrwxrwx 1 root root 20 Aug 25 03:55 libQtScript.so.4 -> libQtScript.so.4.8.6 lrwxrwxrwx 1 root root 20 Aug 25 03:55 libQtScript.so.4.8 -> libQtScript.so.4.8.6 -rwxr-xr-x 1 root root 3052585 Aug 25 03:55 libQtScript.so.4.8.6 -rw-r--r-- 1 root root 915 Aug 25 20:08 libQtScriptTools.la -rw-r--r-- 1 root root 849 Aug 25 20:08 libQtScriptTools.prl lrwxrwxrwx 1 root root 25 Aug 25 06:08 libQtScriptTools.so -> libQtScriptTools.so.4.8.6 lrwxrwxrwx 1 root root 25 Aug 25 06:08 libQtScriptTools.so.4 -> libQtScriptTools.so.4.8.6 lrwxrwxrwx 1 root root 25 Aug 25 06:08 libQtScriptTools.so.4.8 -> libQtScriptTools.so.4.8.6 -rwxr-xr-x 1 root root 983124 Aug 25 06:08 libQtScriptTools.so.4.8.6 -rw-r--r-- 1 root root 828 Aug 25 20:07 libQtSql.la -rw-r--r-- 1 root root 794 Aug 25 20:07 libQtSql.prl lrwxrwxrwx 1 root root 17 Aug 25 03:03 libQtSql.so -> libQtSql.so.4.8.6 lrwxrwxrwx 1 root root 17 Aug 25 03:03 libQtSql.so.4 -> libQtSql.so.4.8.6 lrwxrwxrwx 1 root root 17 Aug 25 03:03 libQtSql.so.4.8 -> libQtSql.so.4.8.6 -rwxr-xr-x 1 root root 844732 Aug 25 03:03 libQtSql.so.4.8.6 -rw-r--r-- 1 root root 848 Aug 25 20:07 libQtSvg.la -rw-r--r-- 1 root root 814 Aug 25 20:07 libQtSvg.prl lrwxrwxrwx 1 root root 17 Aug 25 03:47 libQtSvg.so -> libQtSvg.so.4.8.6 lrwxrwxrwx 1 root root 17 Aug 25 03:47 libQtSvg.so.4 -> libQtSvg.so.4.8.6 lrwxrwxrwx 1 root root 17 Aug 25 03:47 libQtSvg.so.4.8 -> libQtSvg.so.4.8.6 -rwxr-xr-x 1 root root 428747 Aug 25 03:47 libQtSvg.so.4.8.6 -rw-r--r-- 1 root root 835 Aug 25 20:07 libQtTest.la -rw-r--r-- 1 root root 803 Aug 25 20:07 libQtTest.prl lrwxrwxrwx 1 root root 18 Aug 25 03:04 libQtTest.so -> libQtTest.so.4.8.6 lrwxrwxrwx 1 root root 18 Aug 25 03:04 libQtTest.so.4 -> libQtTest.so.4.8.6 lrwxrwxrwx 1 root root 18 Aug 25 03:04 libQtTest.so.4.8 -> libQtTest.so.4.8.6 -rwxr-xr-x 1 root root 195211 Aug 25 03:04 libQtTest.so.4.8.6 -rw-r--r-- 1 root root 1315980 Aug 25 06:20 libQtUiTools.a -rw-r--r-- 1 root root 730 Aug 25 20:08 libQtUiTools.prl -rw-r--r-- 1 root root 943 Aug 25 20:08 libQtWebKit.la -rw-r--r-- 1 root root 804 Aug 25 20:08 libQtWebKit.prl lrwxrwxrwx 1 root root 20 Aug 25 06:04 libQtWebKit.so -> libQtWebKit.so.4.9.4 lrwxrwxrwx 1 root root 20 Aug 25 06:04 libQtWebKit.so.4 -> libQtWebKit.so.4.9.4 lrwxrwxrwx 1 root root 20 Aug 25 06:04 libQtWebKit.so.4.9 -> libQtWebKit.so.4.9.4 -rwxr-xr-x 1 root root 29722397 Aug 25 06:04 libQtWebKit.so.4.9.4 -rw-r--r-- 1 root root 828 Aug 25 20:07 libQtXml.la -rw-r--r-- 1 root root 896 Aug 25 20:07 libQtXmlPatterns.la -rw-r--r-- 1 root root 830 Aug 25 20:07 libQtXmlPatterns.prl lrwxrwxrwx 1 root root 25 Aug 25 03:46 libQtXmlPatterns.so -> libQtXmlPatterns.so.4.8.6 lrwxrwxrwx 1 root root 25 Aug 25 03:46 libQtXmlPatterns.so.4 -> libQtXmlPatterns.so.4.8.6 lrwxrwxrwx 1 root root 25 Aug 25 03:46 libQtXmlPatterns.so.4.8 -> libQtXmlPatterns.so.4.8.6 -rwxr-xr-x 1 root root 5547166 Aug 25 03:46 libQtXmlPatterns.so.4.8.6 -rw-r--r-- 1 root root 794 Aug 25 20:07 libQtXml.prl lrwxrwxrwx 1 root root 17 Aug 25 02:59 libQtXml.so -> libQtXml.so.4.8.6 lrwxrwxrwx 1 root root 17 Aug 25 02:59 libQtXml.so.4 -> libQtXml.so.4.8.6 lrwxrwxrwx 1 root root 17 Aug 25 02:59 libQtXml.so.4.8 -> libQtXml.so.4.8.6 -rwxr-xr-x 1 root root 347438 Aug 25 02:59 libQtXml.so.4.8.6 lrwxrwxrwx 1 root root 18 Aug 23 21:56 libts-1.0.so.0 -> libts-1.0.so.0.0.0 -rwxr-xr-x 1 root root 13122 Aug 23 21:56 libts-1.0.so.0.0.0 -rwxr-xr-x 1 root root 937 Aug 23 21:56 libts.la lrwxrwxrwx 1 root root 18 Aug 23 21:56 libts.so -> libts-1.0.so.0.0.0 drwxr-xr-x 2 root root 4096 Aug 23 21:56 pkgconfig -rwxrwxrwx 1 1001 1001 75 Apr 10 2014 README drwxr-xr-x 2 root root 4096 Aug 23 21:56 ts root@debian:/disk2/qt-everywhere-opensource-src-4.8.6#
root@debian:/disk2/qt-everywhere-opensource-src-4.8.6# ls bin demos lib Makefile templates changes-4.8.6 doc lib2 mkspecs tools config.profiles examples lib2.tar.gz plugins translations config.status imports lib3.tar.gz projects.pro util config.tests include LICENSE.FDL qmake configure INSTALL LICENSE.GPL3 README configure.exe LGPL_EXCEPTION.txt LICENSE.LGPL src root@debian:/disk2/qt-everywhere-opensource-src-4.8.6# tar -zcf lib.tar.gz lib
root@debian:/disk2/qt-everywhere-opensource-src-4.8.6# cd /usr/local/ root@debian:/usr/local# ls arm-linux-lib etc include man share tslib bin games lib sbin src tslib.tar.gz root@debian:/usr/local# tar -zcf tslib.tar.gz tslib
7,移植到Embedded arm
上面有说到:
"
关于 -prefix -prefix-install 如果不指定 :
编译后在 embedded arm 中要把 lib bin 放在 /usr/local/Trolltech/Qt-4.8.6 这个目录下,不存在就需要创建
"
所以 创建 /usr/local/Trolltech/Qt-4.8.6
结果一运行程序 傻眼了,是
/usr/local/Trolltech/QtEmbedded-4.8.6-arm
把 lib.tar.gz tslib.tar.gz 拷贝到 /usr/local/Trolltech/QtEmbedded-4.8.6-arm 目录下并解压:
tar -xzvf lib.tar.gz
tar -xzvf tslib.tar.gz
配置 so加载路径:
# nano /etc/ld.so.conf include /etc/ld.so.conf.d/*.conf /usr/local/Trolltech/QtEmbedded-4.8.6-arm/tslib/lib /usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib
运行:
ldconfig
再运行:
# ./lib/browser QWSSocket::connectToLocalFile could not connect:: No such file or directory QWSSocket::connectToLocalFile could not connect:: No such file or directory QWSSocket::connectToLocalFile could not connect:: No such file or directory QWSSocket::connectToLocalFile could not connect:: No such file or directory QWSSocket::connectToLocalFile could not connect:: No such file or directory QWSSocket::connectToLocalFile could not connect:: No such file or directory No Qt for Embedded Linux server appears to be running. If you want to run this program as a server, add the "-qws" command-line option.
提示以-qws方式 运行...上文已经多次提到过 qws了吧.这儿就不说了
# ./lib/browser -qws
QSslSocket: cannot resolve SSLv2_client_method
QSslSocket: cannot resolve SSLv2_server_method
如果想打开某一个网页如百度，请使用命令：./browser -qws http://www.baidu.com
存在问题鼠标不能操作(后面发现鼠标存在,只是颜色透明,且移动飞快...),键盘 没有中文输入法 .后续解决
7,单独对qt-everywhere-opensource-src-4.8.6demosrowser 的编译.
qt库有了后就不需要再次去编译整个项目了,原因你懂的,每次编译5个小时,要疯的.
所以需要单独对 browser项目进行编译.
进入 browser 目录.
使用
/disk2/qt-everywhere-opensource-src-4.8.6/bin/qmake -project
生成 browser.pro
由于对整个qt工程编译时已经生成,故可以跳过
编译browser.pro文件. 因为每次 make 都会调用 browser.pro重新 生成 Makefile 文件... 所以对Makefile文件修改,就不太管用了.
###################################################################### # Automatically generated by qmake (2.01a) Tue Aug 25 07:41:23 2015 ###################################################################### TEMPLATE = app TARGET = DEPENDPATH += . data htmls INCLUDEPATH += . "../../include/QtWebKit" QMAKE_LIBS += -lQtWebKit -lQtGui # Input HEADERS += autosaver.h bookmarks.h browserapplication.h browsermainwindow.h chasewidget.h cookiejar.h downloadmanager.h edittableview.h edittreeview.h history.h modelmenu.h networkaccessmanager.h searchlineedit.h settings.h squeezelabel.h tabwidget.h toolbarsearch.h urllineedit.h webview.h xbel.h FORMS += addbookmarkdialog.ui bookmarks.ui cookies.ui cookiesexceptions.ui downloaditem.ui downloads.ui history.ui passworddialog.ui proxy.ui settings.ui SOURCES += autosaver.cpp bookmarks.cpp browserapplication.cpp browsermainwindow.cpp chasewidget.cpp cookiejar.cpp downloadmanager.cpp edittableview.cpp edittreeview.cpp history.cpp main.cpp modelmenu.cpp networkaccessmanager.cpp searchlineedit.cpp settings.cpp squeezelabel.cpp tabwidget.cpp toolbarsearch.cpp urllineedit.cpp webview.cpp xbel.cpp RESOURCES += data/data.qrc htmls/htmls.qrc
增加 新的引用库 和头文件目录
INCLUDEPATH += . "../../include/QtWebKit"
QMAKE_LIBS += -lQtWebKit -lQtGui
...
原 main.cpp文件:
#include "browserapplication.h" int main(int argc, char **argv) { Q_INIT_RESOURCE(data); BrowserApplication application(argc, argv); if (!application.isTheOnlyBrowser()) return 0; application.newMainWindow(); return application.exec(); }
现改为:
#include "browserapplication.h" #include "browsermainwindow.h" #include <QtGui/QApplication> #include <QTextCodec> #include <QWSServer> //#include <QT> #include<QFont> int main(int argc, char **argv) { //QTextCodec::setCodecForTr(QTextCodec::codecForName("utf-8")); //QTextCodec::setCodecForTr(QTextCodec::codecForName("UTF-8")); Q_INIT_RESOURCE(data); BrowserApplication application(argc, argv); //application.setOverrideCursor(Qt::BlankCursor); //隐藏鼠标 //application.setOverrideCursor(Qt::ArrowCursor); //显示正常鼠标 application.setOverrideCursor(Qt::ArrowCursor); //设置windows 自带宋体 //QFont font; //font.setPointSize(26); //font.setFamily(("simsun")); //application.setFont(font); QTextCodec::setCodecForTr(QTextCodec::codecForName("GBK")); QTextCodec *codec = QTextCodec::codecForName("GBK"); application.setFont(QFont("wenquanyi", 10)); //QWSServer::setCursorVisible(false); if (!application.isTheOnlyBrowser()) return 0; BrowserMainWindow * pMainWindow=NULL; pMainWindow=application.newMainWindow(); pMainWindow->showFullScreen();//全屏 return application.exec(); }
这儿使用了 文泉驿 字体
application.setFont(QFont("wenquanyi", 10));
下载: http://download.csdn.net/download/chenaini119/7867415
下载解压后,放入
Embedded arm 中的
/usr/local/Trolltech/QtEmbedded-4.8.6-arm/lib/fonts 中
编译:
root@debian:/disk2/qt-everywhere-opensource-src-4.8.6/demos/browser# /disk2/qt-everywhere-opensource-src-4.8.6/bin/qmake root@debian:/disk2/qt-everywhere-opensource-src-4.8.6/demos/browser# make
可能出现错误1:
make[2]: Nothing to be done for `first'.
----
当前工程是的代码没有更改.
运行
/disk2/qt-everywhere-opensource-src-4.8.6/bin/qmake
根据 browser.pro 以生成 Makefile文件
再
make
或者 make clean 清除
或删除
/disk2/qt-everywhere-opensource-src-4.8.6/demos/browser 下面的隐藏文件
root@debian:/disk2/qt-everywhere-opensource-src-4.8.6/demos/browser# find . -name '.*' . ./.pch ./.moc ./.obj ./.uic ./.rcc root@debian:/disk2/qt-everywhere-opensource-src-4.8.6/demos/browser# rm -rf .obj
可能出现错误2:
/release-shared-emb-arm -o .obj/release-shared-emb-arm/bookmarks.o bookmarks.cpp
In file included from bookmarks.cpp:46:0:
history.h:55:32: fatal error: QWebHistoryInterface: No such file or directory
出现编译错误 缺少 QtWebKit
browser.pro中添加
INCLUDEPATH += . "../../include/QtWebKit" QMAKE_LIBS += -lQtWebKit -lQtGui
###################################################################### # Automatically generated by qmake (2.01a) Tue Aug 25 07:41:23 2015 ###################################################################### TEMPLATE = app TARGET = DEPENDPATH += . data htmls #CONFIG += uitools INCLUDEPATH += . "../../include/QtWebKit" QMAKE_LIBS += -lQtWebKit -lQtGui # Input #............后面省略....
可能出现错误3:
程序连接时找不到 QUiLoader 所在的库
webview.cpp:(.text+0x2d8): undefined reference to `QUiLoader::QUiLoader(QObject*)'
sk2/qt-everywhere-opensource-src-4.8.6/lib -lQtGui -lQtNetwork -lQtCore -lpthread .obj/release-shared-emb-arm/webview.o: In function `WebPage::createPlugin(QString const&, QUrl const&, QStringList const&, QStringList const&)': webview.cpp:(.text+0x2d8): undefined reference to `QUiLoader::QUiLoader(QObject*)' webview.cpp:(.text+0x318): undefined reference to `QUiLoader::createWidget(QString const&, QWidget*, QString const&)' webview.cpp:(.text+0x344): undefined reference to `QUiLoader::~QUiLoader()' webview.cpp:(.text+0x36c): undefined reference to `QUiLoader::~QUiLoader()'
在lib 下面查找:
root@debian:/disk2/qt-everywhere-opensource-src-4.8.6/lib# find . -name '*Tools*' ./libQtScriptTools.so ./libQtUiTools.prl ./libQtScriptTools.so.4.8 ./pkgconfig/QtUiTools.pc ./pkgconfig/QtScriptTools.pc ./libQtScriptTools.so.4 ./libQtScriptTools.so.4.8.6 ./libQtScriptTools.prl ./libQtScriptTools.la ./libQtUiTools.a
存在一个 ./libQtUiTools.a 的静态库文件.
修改 browser.pro文件
###################################################################### # Automatically generated by qmake (2.01a) Tue Aug 25 07:41:23 2015 ###################################################################### TEMPLATE = app TARGET = DEPENDPATH += . data htmls #CONFIG += uitools INCLUDEPATH += . "../../include/QtWebKit" "../../include/QtUiTools" QMAKE_LIBS += -lQtWebKit -lQtGui -lQtUiTools # Input #............后面省略..............
root@debian:/disk2/qt-everywhere-opensource-src-4.8.6/demos/browser# ls -la total 3248 drwxr-xr-x 9 1001 1001 4096 Aug 26 12:48 . drwxr-xr-x 32 1001 1001 4096 Aug 23 05:47 .. -rw-r--r-- 1 1001 1001 2300 Apr 10 2014 addbookmarkdialog.ui -rw-r--r-- 1 1001 1001 3134 Apr 10 2014 autosaver.cpp -rw-r--r-- 1 1001 1001 2638 Apr 10 2014 autosaver.h -rw-r--r-- 1 1001 1001 31630 Apr 10 2014 bookmarks.cpp -rw-r--r-- 1 1001 1001 8981 Apr 10 2014 bookmarks.h -rw-r--r-- 1 1001 1001 2544 Apr 10 2014 bookmarks.ui -rwxr-xr-x 1 root root 1404709 Aug 26 12:48 browser
./browser 已经成功生成 .
再上个图
中文 已经有了,,虽然有些丑...将就吧.
在运行时候加个参数 ./browser -qws -nomouse 这个是禁止了所有的鼠标功能，连点击都不响应 -mouse是使用鼠标.
但程序运行后还是没有看见光标
上面图片 没有显示出来可能是因为 -depths 16,24,32 改为 -depths all
-depths <list> ...... Comma-separated list of supported bit-per-pixel
depths, from: 1, 4, 8, 12, 15, 16, 18, 24, 32 and 'all'.
--------2017
qupzilla->Qt-5.3.2
x64上编译命令
./configure -opensource -release -shared -Declarative -importdir /opt/imports -fast -no-largefile -qt-sql-sqlite -qt3support -exceptions -xmlpatterns -no-glib -no-phonon -no-mmx -no-3dnow -no-sse -no-sse2 -svg -webkit -qt-zlib -qt-libtiff -qt-libpng -qt-libjpeg -make libs -make tools -make examples -make demos -make translations -nomake docs -no-nis -no-cups -iconv -no-dbus -xplatform qws/linux-x86_64-g++ -little-endian -qt-freetype -depths all -qt-gfx-linuxfb -embedded x86 -DQT_QLOCALE_USES_FCVT -DQT_NO_QWS_CURSOR -no-pch -I/usr/local/ssl/include -L/usr/local/ssl/lib -confirm-license
可能遇到问题:
qt qatomic_i386.h:177: Error: incorrect register `%rbx' used with `l' suffix
本来想Qt/E 先编译一个X86的版本到PC上使用qvfb仿真一下，所以就按照网上的办法开始编译
起初我编译Qt/E时 ./configure -xplatform qws/Linux-x86-g++ 是按照网上的设置
但是会报错：
incorrect register `%rbp' used with `l' suffix
这个问题其实是我的Ubuntu是64位的，所以需要将这里的编译器修改成：-xplatform qws/linux-x86_64-g++
如果你是其他架构，可以去Qt文件夹下的mkspecs和mkspecs/qws/中找 符合你的平台要求的编译器
/home/webkittest/qt-everywhere-opensource-src-4.8.6/tools/designer/src/lib/shared/previewmanager.cpp:820:16: error: cannot convert âboolâ to âQWidget*â in return false
改为return 0;
x64 ,gcc6,C++11,itemviews.cpp:396:74: error: invalid conversion from int to QFlags<QItemSelectionModel::SelectionFlag>::Zero {aka void**} [-fpermissive]
http://www.qtcentre.org/threads/48957-error-invalid-conversion-from-%E2%80%98int%E2%80%99-to-%E2%80%98InitializationState
改为
view()->selectionModel()->select(index, QItemSelectionModel::Columns & QItemSelectionModel::Deselect ); view()->selectionModel()->select(index, QItemSelectionModel::SelectionFlags( QItemSelectionModel::Columns & QItemSelectionModel::Deselect ));
x64下 error: shift expression (1048575 << 20) overflows [-fpermissive]
gcc6编译时,报错.
https://lists.yoctoproject.org/pipermail/yocto/2016-July/031272.html
error: enumerator value for BackgroundMask is not an integer constant
qt-everywhere-opensource-src-4.8.6/src/xmlpatterns/api/qcoloroutput_p.h
error: shift expression (1048575 << 20) overflows [-fpermissive]
+| api/qcoloroutput_p.h:74:60: error: shift expression '(1048575 << 20)' overflows [-fpermissive] +| api/qcoloroutput_p.h:74:63: error: enumerator value for 'BackgroundMask' is not an integer constant +| BackgroundMask = ((1 << BackgroundShift) - 1) << BackgroundShift
改为:
class ColorOutput
{
enum
{
ForegroundShift = 10,
BackgroundShift = 20,
SpecialShift = 20,
//gcc 6之前版本使用
//ForegroundMask = ((1 << ForegroundShift) - 1) << ForegroundShift,
//BackgroundMask = ((1 << BackgroundShift) - 1) << BackgroundShift
//gcc 6使用下面
ForegroundMask = 0x1f << ForegroundShift,
BackgroundMask = 0x7 << BackgroundShift
};
..........
x64 gcc6 C++11下 error: std::tr1 has not been declaredfrom
from ../3rdparty/javascriptcore/JavaScriptCore/pcre/pcre_exec.cpp:50:
../3rdparty/javascriptcore/JavaScriptCore/wtf/TypeTraits.h:173:69: error: std::tr1 has not been declared
template<typename T> struct HasTrivialConstructor : public std::tr1::has_trivial_constructor<T> { };
^~~
../3rdparty/javascriptcore/JavaScriptCore/wtf/TypeTraits.h:173:74: error: expected â{â before âhas_trivial_constructorâ
template<typename T> struct HasTrivialConstructor : public std::tr1::has_trivial_constructor<T> { };
^~~~~~~~~~~~~~~~~~~~~~~
../3rdparty/javascriptcore/JavaScriptCore/wtf/TypeTraits.h:174:68: error: âstd::tr1â has not been declared
template<typename T> struct HasTrivialDestructor : public std::tr1::has_trivial_destructor<T> { };
^~~
../3rdparty/javascriptcore/JavaScriptCore/wtf/TypeTraits.h:174:73: error: expected â{â before âhas_trivial_destructorâ
template<typename T> struct HasTrivialDestructor : public std::tr1::has_trivial_destructor<T> { };
^~~~~~~~~~~~~~~~~~~~~~
修改 qt-everywhere-opensource-src-4.8.6/src/script/script.pro为如下:
TARGET = QtScript QPRO_PWD = $$PWD QT = core DEFINES += JSC=QTJSC jscyyparse=qtjscyyparse jscyylex=qtjscyylex jscyyerror=qtjscyyerror WTF=QTWTF DEFINES += QT_BUILD_SCRIPT_LIB DEFINES += QT_NO_USING_NAMESPACE DEFINES += QLALR_NO_QSCRIPTGRAMMAR_DEBUG_INFO #win32-msvc*|win32-icc:QMAKE_LFLAGS += /BASE:0x66000000 ### FIXME unix|win32-g++*:QMAKE_PKGCONFIG_REQUIRES = QtCore include(../qbase.pri) CONFIG += building-libs # FIXME: shared the statically built JavaScriptCore # Fetch the base WebKit directory from the WEBKITDIR environment variable; # fall back to src/3rdparty otherwise WEBKITDIR = $$(WEBKITDIR) isEmpty(WEBKITDIR) { WEBKITDIR = $$PWD/../3rdparty/javascriptcore GENERATED_SOURCES_DIR = generated } else { message(using external WebKit from $$WEBKITDIR) CONFIG -= QTDIR_build } include($$WEBKITDIR/WebKit.pri) # Disable a few warnings on Windows. # These are in addition to the ones disabled in WebKit.pri win32-msvc*: QMAKE_CXXFLAGS += -wd4396 -wd4099 # Windows CE-specific stuff copied from WebCore.pro # ### Should rather be in JavaScriptCore.pri? wince* { INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/os-wince INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/os-win32 LIBS += -lmmtimer } !qpa:mac { DEFINES += ENABLE_JSC_MULTIPLE_THREADS=0 LIBS_PRIVATE += -framework AppKit } qpa:mac { DEFINES += ENABLE_JSC_MULTIPLE_THREADS=0 !ios { LIBS_PRIVATE += -framework CoreServices } else { LIBS_PRIVATE += -framework CoreFoundation } } include($$WEBKITDIR/JavaScriptCore/JavaScriptCore.pri) INCLUDEPATH += $$WEBKITDIR/JavaScriptCore INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/parser INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/bytecompiler INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/debugger INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/runtime INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/wtf INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/unicode INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/interpreter INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/jit INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/profiler INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/wrec INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/API INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/bytecode INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/assembler INCLUDEPATH += $$WEBKITDIR/JavaScriptCore/generated # This line copied from WebCore.pro DEFINES += WTF_USE_JAVASCRIPTCORE_BINDINGS=1 WTF_CHANGES=1 CONFIG(release, debug|release):DEFINES += NDEBUG solaris-g++:isEqual(QT_ARCH,sparc) { CONFIG -= separate_debug_info CONFIG += no_debug_info } # Avoid JSC C API functions being exported. DEFINES += JS_NO_EXPORT INCLUDEPATH += $$PWD include(script.pri) symbian { TARGET.UID3=0x2001B2E1 } symbian { symbian-abld|symbian-sbsv2 { MMP_RULES += ALWAYS_BUILD_AS_ARM } else { QMAKE_CFLAGS -= --thumb QMAKE_CXXFLAGS -= --thumb } QMAKE_CXXFLAGS.ARMCC += -OTime -O3 } integrity { CFLAGS += --diag_remark=236,82 } # WebKit doesn't compile in C++0x mode *-g++*:QMAKE_CXXFLAGS -= -std=c++0x -std=gnu++0x # gcc6 # Fixes compilation errors with GCC 6.1.0 QMAKE_CXXFLAGS += -std=gnu++98
debugging/qscriptdebuggerconsole.cpp:492:16: error: cannot convert bool to QScriptDebuggerConsoleCommandJob* in return
return false;
webkittest/qt-everywhere-opensource-src-4.8.6/src/scripttools/debugging/qscriptdebuggerconsole.cpp
QScriptDebuggerConsoleCommandJob *QScriptDebuggerConsole::consumeInput(
const QString &input, QScriptMessageHandlerInterface *messageHandler,
QScriptDebuggerCommandSchedulerInterface *commandScheduler)
{
...
if (check.state() == QScriptSyntaxCheckResult::Intermediate)
return 0;
...
}
改为return 0