• CC Arithmetic Progressions (FFT + 分块处理)


    转载请注明出处,谢谢http://blog.csdn.net/ACM_cxlove?viewmode=contents    by---cxlove

    题目:给出n个数,选出三个数,按下标顺序形成等差数列

    http://www.codechef.com/problems/COUNTARI

    如果只是形成 等差数列并不难,大概就是先求一次卷积,然后再O(n)枚举,判断2 * a[i]的种数,不过按照下标就不会了。

    有种很矬的,大概就是O(n)枚举中间的数,然后 对两边分别卷积,O(n * n * lgn)。

    如果能想到枚举中间的数的话,应该可以进一步想到分块处理。

    如果分为K块

    那么分为几种情况 :

    三个数都是在当前块中,那么可以枚举后两个数,查找第一个数,复杂度O(N/K * N/K)

    两个数在当前块中,那么另外一个数可能在前面,也可能在后面,同理还是枚举两个数,查找,复杂度
    O(N/K * N/K)

    如果只有一个数在当前块中,那么就要对两边的数进行卷积,然后枚举当前块中的数,查询2 × a[i]。复杂度O(N * lg N)

    那么总体就是O(k * (N/K * N/K + N * lg N))。

    #include <iostream>
    #include <cstdio>
    #include <cstring>
    #include <cmath>
    #include <algorithm>
    using namespace std;
    //FFT copy from kuangbin
    const double pi = acos (-1.0);
    // Complex  z = a + b * i  
    struct Complex {
        double a, b;
        Complex(double _a=0.0,double _b=0.0):a(_a),b(_b){}
        Complex operator + (const Complex &c) const {
            return Complex(a + c.a , b + c.b);
        }
        Complex operator - (const Complex &c) const {
            return Complex(a - c.a , b - c.b);
        }
        Complex operator * (const Complex &c) const {
            return Complex(a * c.a - b * c.b , a * c.b + b * c.a);
        }
    };
    //len = 2 ^ k
    void change (Complex y[] , int len) {
        for (int i = 1 , j = len / 2 ; i < len -1 ; i ++) {
            if (i < j) swap(y[i] , y[j]);
            int k = len / 2;
            while (j >= k) {
                j -= k;
                k /= 2;
            }
            if(j < k) j += k;
        } 
    }
    // FFT 
    // len = 2 ^ k
    // on = 1  DFT    on = -1 IDFT
    void FFT (Complex y[], int len , int on) {
        change (y , len);
        for (int h = 2 ; h <= len ; h <<= 1) {
            Complex wn(cos (-on * 2 * pi / h), sin (-on * 2 * pi / h));
            for (int j = 0 ; j < len ; j += h) {
                Complex w(1 , 0);
                for (int k = j ; k < j + h / 2 ; k ++) {
                    Complex u = y[k];
                    Complex t = w * y [k + h / 2];
                    y[k] = u + t;
                    y[k + h / 2] = u - t;
                    w = w * wn;
                }
            }
        }
        if (on == -1) {
            for (int i = 0 ; i < len ; i ++) {
                y[i].a /= len;
            }
        }
    }
    const int N = 100005;
    typedef long long LL;
    int n , a[N];
    int block , size;
    LL num[N << 2];
    int min_num = 30000 , max_num = 1;
    int before[N] = {0}, behind[N] = {0} , in[N] = {0};
    Complex x1[N << 2] ,x2[N << 2];
    int main () {
        #ifndef ONLINE_JUDGE
            freopen("input.txt" , "r" , stdin);
        #endif
        scanf ("%d", &n);
        for (int i = 0 ; i < n ; ++ i) {
            scanf ("%d", &a[i]);
            behind[a[i]] ++;
            min_num = min (min_num , a[i]);
            max_num = max (max_num , a[i]);
        }
        LL ret = 0;
        block = min(n , 35);
        size = (n + block - 1) / block;
        for (int t = 0 ; t < block ; t ++) {
            int s = t * size , e = (t + 1) * size;
            if (e > n) e = n;
            for (int i = s ; i < e ; i ++) {
                behind[a[i]] --;
            }
            for (int i = s ; i < e ; i ++) {
                for (int j = i + 1 ; j < e ; j ++) {
                    int m = 2 * a[i] - a[j];
                    if(m >= 1 && m <= 30000) { 
                        // both of three in the block
                        ret += in[m];
                        // one of the number in the pre block
                        ret += before[m];
                    }
                    m = 2 * a[j] - a[i];
                    if (m >= 1 && m <= 30000) {
                        // one of the number in the next block
                        ret += behind[m];
                    }
                }
                in[a[i]] ++;
            }
            // pre block , current block , next block
            if (t > 0 && t < block - 1) {
                int l = 1;
                int len = max_num + 1;
                while (l < len * 2) l <<= 1;
                for (int i = 0 ; i < len ; i ++) {
                    x1[i] = Complex (before[i] , 0);
                }
                for (int i = len ; i < l ; i ++) {
                    x1[i] = Complex (0 , 0);
                }
                for (int i = 0 ; i < len ; i ++) {
                    x2[i] = Complex (behind[i] , 0);
                }
                for (int i = len ; i < l ; i ++) {
                    x2[i] = Complex (0 , 0);
                }
                FFT (x1 , l , 1);
                FFT (x2 , l , 1);
                for (int i = 0 ; i < l ; i ++) {
                    x1[i] = x1[i] * x2[i];
                }
                FFT (x1 , l , -1);
                for (int i = 0 ; i < l ; i ++) {
                    num[i] = (LL)(x1[i].a + 0.5);
                }
                for (int i = s ; i < e ; i ++) {
                    ret += num[a[i] << 1];
                }
            }
            for (int i = s ; i < e ; i ++) {
                in[a[i]] --;
                before[a[i]] ++;
            }
        }
        printf("%lld
    ", ret);
        return 0;
    }
    


  • 相关阅读:
    车牌定位与畸变校正(python3.7,opencv4.0)
    TensorFlow 2.0 Alpha/Beta pip安装指令
    pandas 获取数据帧DataFrame的行、列数
    pandas 对数据帧DataFrame中数据的增删、补全及转换操作
    pandas 对数据帧DataFrame中数据的索引及切片操作
    Exception: Exception caught in workbook destructor. Explicit close() may be required for workbook. 错误解决办法
    pandas对Excel文件的读写操作
    第一个WPF程序(串口调试)
    [C#]AdvPropertyGrid的使用示例(第三方控件:DevComponents.DotNetBar2.dll)
    C# 获得本地通用网卡信息
  • 原文地址:https://www.cnblogs.com/aukle/p/3217734.html
Copyright © 2020-2023  润新知