• Linux


    01 - Linux虚拟机出现多个默认路由,导致部分网络连接异常

    # route -n
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    0.0.0.0         192.168.16.1    0.0.0.0         UG    100    0        0 enp0s3
    0.0.0.0         10.0.3.2        0.0.0.0         UG    101    0        0 enp0s8
    ......
    

    处理方法:更改网关192.168.16.1的路由设置。

    • CentOS7:应用程序---》系统工具---》设置---》网络---》以太网(enp0s3),点击右下角的设置按钮---》IPv4---》选择“仅对此网络上的资源使用此连接”---》应用。
    • Ubuntu1604:系统设置---》网络---》有线,选择对应网卡---》选项---》IPv4设置---》路由---》选择“仅将此连接用于相对应的网络上的资源”---》确定。
    # route -n
    ......
    192.168.16.0    0.0.0.0         255.255.255.0   U     100    0        0 enp0s3
    ......
    

    02 - Linux查看端口状态

    检测本机8080端口状态:netstat –apn | grep 8080
    检测192.168.0.1主机的8080端口状态:telnet 192.168.0.1 8080nmap -sS -P0 -n -p 22 192.168.0.1
    检测192.168.0.1主机的1到1024端口状态:nc -z 192.168.0.1 1-1024

    # nmap -sS -P0 -n -p 22 10.140.0.135
    Starting Nmap 6.40 ( http://nmap.org ) at 2016-11-09 10:42 CST
    Nmap scan report for 10.140.0.135
    Host is up (0.00040s latency).
    PORT STATE SERVICE
    22/tcp open ssh
    MAC Address: 08:00:27:3F:19:79 (Cadmus Computer Systems)
    Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
     
    # nmap -sS -P0 -n -p 80 10.140.0.135
    Starting Nmap 6.40 ( http://nmap.org ) at 2016-11-09 10:50 CST
    Nmap scan report for 10.140.0.135
    Host is up (0.00046s latency).
    PORT STATE SERVICE
    80/tcp closed http
    MAC Address: 08:00:27:3F:19:79 (Cadmus Computer Systems)
    Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds
    

    03 - Linux命令行设置CentOS计算机名称、hosts及网卡地址

    $ echo "anliven" > /etc/hostname
    $ echo -e "192.168.16.166 master
    192.168.16.167 slave01
    192.168.16.168 slave02" >> /etc/hosts
    $ sed -i '/IPADDR/s/192.168.16.200/192.168.16.166/' /etc/sysconfig/network-scripts/ifcfg-enp0s8
    $ reboot
    

    04 - Linux CentOS7关闭SELinux

    • 永久方法:修改/etc/selinux/config文件中设置SELINUX=disabled ,然后重启。
    # getenforce
    Enforcing
    # sed -i '/SELINUX/s/enforcing/disabled/' /etc/selinux/config
    # reboot
    
    • 临时方法:执行setenforce 0命令设置SELinux成为permissive模式
    sudo systemctl status firewalld.service
    sudo systemctl stop firewalld.service          
    sudo systemctl disable firewalld.service
    

    05 - Ubuntu安装ssh并允许root登录

    1. Install openssh-server
    apt-get update
    apt-get install openssh-server
    
    1. Change ssh configuration
    root@anliven:~# vim /etc/ssh/sshd_config 
    root@anliven:~# 
    root@anliven:~# cat /etc/ssh/sshd_config |grep RootLogin
    #PermitRootLogin without-password
    PermitRootLogin yes
    # the setting of "PermitRootLogin without-password".
    root@anliven:~# 
    root@anliven:~# /etc/init.d/ssh restart
    ssh stop/waiting
    ssh start/running, process 3782
    root@anliven:~# 
    
    1. Check ssh status
    root@anliven:~# lsof -i:22
    COMMAND  PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
    sshd    3630 root    3u  IPv4  19611      0t0  TCP *:ssh (LISTEN)
    sshd    3630 root    4u  IPv6  19613      0t0  TCP *:ssh (LISTEN)
    root@anliven:~# 
    root@anliven:~# ps -ef |grep ssh
    root      3630     1  0 13:43 ?        00:00:00 /usr/sbin/sshd -D    
    root      3750  3732  0 13:46 pts/1    00:00:00 grep --color=auto ssh
    root@anliven:~# 
    

    06 - Linux常用网络软件包

    • inetuils-ping --- ping
    • net-tools --- ifconfig/route/netstat/......
    • iproute --- ip
    • traceroute
    • bind-utils --- nslookup/dig/host/......
    • bridge-utils --- brctl
    • nmap
    • tcpdump
    • wireshark
    • curl
    • wget
      ......

    07 - Linux设置ssh免密码认证

    示例:slave01和slave02两个主机ssh免密码相互登录

    ### 设置slave01 node
    [hadoop@slave01 ~]$ ssh-keygen
    [hadoop@slave01 ~]$ 
    [hadoop@slave01 ~]$ cd .ssh
    [hadoop@slave01 .ssh]$ ssh-copy-id -i hadoop@slave01
    [hadoop@slave01 .ssh]$ ssh-copy-id -i hadoop@slave02
    [hadoop@slave01 .ssh]$ 
    [hadoop@slave01 .ssh]$ ll -a
    total 20
    drwx------  2 hadoop hadoop   76 Mar  7 23:34 .
    drwx------. 6 hadoop hadoop 4096 Mar  7 23:30 ..
    -rw-------  1 hadoop hadoop 1187 Mar  7 23:34 authorized_keys
    -rw-------  1 hadoop hadoop 1675 Mar  7 23:33 id_rsa
    -rw-r--r--  1 hadoop hadoop  396 Mar  7 23:33 id_rsa.pub
    -rw-r--r--  1 hadoop hadoop  551 Mar  7 23:34 known_hosts
    [hadoop@slave01 .ssh]$ 
    
    ### 设置slave02 node
    [hadoop@slave02 ~]$ ssh-keygen
    [hadoop@slave02 ~]$ 
    [hadoop@slave02 ~]$ cd .ssh
    [hadoop@slave02 .ssh]$ ssh-copy-id -i hadoop@slave01
    [hadoop@slave02 .ssh]$ ssh-copy-id -i hadoop@slave02
    [hadoop@slave02 .ssh]$ 
    [hadoop@slave02 .ssh]$ ll -a
    total 20
    drwx------  2 hadoop hadoop   76 Mar  7 23:35 .
    drwx------. 6 hadoop hadoop 4096 Mar  7 23:30 ..
    -rw-------  1 hadoop hadoop 1187 Mar  7 23:35 authorized_keys
    -rw-------  1 hadoop hadoop 1675 Mar  7 23:33 id_rsa
    -rw-r--r--  1 hadoop hadoop  396 Mar  7 23:33 id_rsa.pub
    -rw-r--r--  1 hadoop hadoop  551 Mar  7 23:35 known_hosts
    [hadoop@slave01 .ssh]$ 
    

    08 - Linux设置路由并指定metric值

    • 默认路由:route add default gw 10.0.2.2 metric 1
    • 指定路由:route add 192.168.0.0 mask 255.255.0.0 192.168.16.1 metric 10

    09 -xxx

  • 相关阅读:
    Elasticsearch5.x批量插入数据(Java)
    Elasticsearch5.x创建索引(Java)
    Kibana5.x界面简要介绍(含x-pack插件)
    CentOS6.5安装Kibana5.3.0
    Elasticsearch5.x Head插件安装
    CentOS6.5安装Elasticsearch5.3.0
    jenkins发布Spring Cloud(单机版)
    prometheus 监控docker
    gitlab迁移单个项目
    python使用pika操作rabbitmq
  • 原文地址:https://www.cnblogs.com/anliven/p/7571948.html
Copyright © 2020-2023  润新知