• 虚拟机centos系统,停机装第二块网卡,需要更改的配置


    虚拟机centos系统,停机装第二块网卡,需要更改的配置。

    问题描述: 虚拟机centos系统,停机装第二块网卡,发现  /etc/sysconfig/network-scripts/ifcfg-eth1 不存在。但 ifconfig 能够看到  eth1  中的  HWaddr  值。

    [root@11gnode1 ~]# ifconfig
    eth0 Link encap:Ethernet HWaddr 00:0C:29:06:C9:21
    inet addr:10.100.25.8 Bcast:10.255.255.255 Mask:255.0.0.0
    inet6 addr: fe80::20c:29ff:fe06:c921/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:48 errors:0 dropped:0 overruns:0 frame:0
    TX packets:43 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:5343 (5.2 KiB) TX bytes:5265 (5.1 KiB)

    eth1 Link encap:Ethernet HWaddr 00:0C:29:06:C9:2B
    inet addr:11.101.26.129 Bcast:11.101.26.255 Mask:255.255.255.0
    inet6 addr: fe80::20c:29ff:fe06:c92b/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:12 errors:0 dropped:0 overruns:0 frame:0
    TX packets:21 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:1772 (1.7 KiB) TX bytes:2366 (2.3 KiB)

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:65536 Metric:1
    RX packets:4 errors:0 dropped:0 overruns:0 frame:0
    TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:240 (240.0 b) TX bytes:240 (240.0 b)

    [root@11gnode1 ~]# vi /etc/sysconfig/network-scripts/ifcfg-eth1
    [root@11gnode1 ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
    cat: /etc/sysconfig/network-scripts/ifcfg-eth1: No such file or directory

    解决办法: 经过实践,虚拟机centos系统,停机装第二块网卡,需要人工手动创建 eth1 文件。

    1. 创建 eth1 文件,并根据  ifconfig 结果中的  HWADDR 值编辑文件。

    [root@11gnode1 ~]# touch /etc/sysconfig/network-scripts/ifcfg-eth1
    [root@11gnode1 ~]# vi /etc/sysconfig/network-scripts/ifcfg-eth1

    2. 查看验证。
    [root@11gnode1 ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
    # Intel Corporation 82545EM Gigabit Ethernet Controller (Copper)
    DEVICE=eth1
    BOOTPROTO=static
    BROADCAST=11.255.255.255
    HWADDR=00:0C:29:06:C9:2B
    IPADDR=11.101.26.8
    NETMASK=255.0.0.0
    NETWORK=11.0.0.0
    ONBOOT=yes

    [root@11gnode1 ~]# ifconfig
    eth0 Link encap:Ethernet HWaddr 00:0C:29:06:C9:21
    inet addr:10.100.25.8 Bcast:10.255.255.255 Mask:255.0.0.0
    inet6 addr: fe80::20c:29ff:fe06:c921/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:466 errors:0 dropped:0 overruns:0 frame:0
    TX packets:263 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:38918 (38.0 KiB) TX bytes:39087 (38.1 KiB)

    eth1 Link encap:Ethernet HWaddr 00:0C:29:06:C9:2B
    inet addr:11.101.26.8 Bcast:11.255.255.255 Mask:255.0.0.0
    inet6 addr: fe80::20c:29ff:fe06:c92b/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:118 errors:0 dropped:0 overruns:0 frame:0
    TX packets:130 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:13188 (12.8 KiB) TX bytes:11382 (11.1 KiB)

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:65536 Metric:1
    RX packets:16 errors:0 dropped:0 overruns:0 frame:0
    TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:960 (960.0 b) TX bytes:960 (960.0 b)

  • 相关阅读:
    多线程编程1-定义理解与三种实现方式
    Java类集框架详细汇总-底层分析
    Trie、并查集、堆、Hash表学习过程以及遇到的问题
    spring前导知识-Tomcat、Maven等配置
    双指针、位运算、离散化、区间合并的手动模拟
    单点登录原理与简单实现
    Spring引入外部配置文件
    Java异常机制
    Java多线程-线程的概念和创建
    java webservice服务器端获取request对象的三种方式
  • 原文地址:https://www.cnblogs.com/andy6/p/6421959.html
Copyright © 2020-2023  润新知