• Codeforces 587B Duff in Beach


    D. Duff in Beach
    time limit per test
    2 seconds
    memory limit per test
    256 megabytes
    input
    standard input
    output
    standard output

    While Duff was resting in the beach, she accidentally found a strange array b0, b1, ..., bl - 1 consisting of l positive integers. This array was strange because it was extremely long, but there was another (maybe shorter) array, a0, ..., an - 1 that b can be build from a with formula: bi = ai mod n where a mod b denoted the remainder of dividing a by b.

    Duff is so curious, she wants to know the number of subsequences of b like bi1, bi2, ..., bix (0 ≤ i1 < i2 < ... < ix < l), such that:

    • 1 ≤ x ≤ k
    • For each 1 ≤ j ≤ x - 1
    • For each 1 ≤ j ≤ x - 1bij ≤ bij + 1. i.e this subsequence is non-decreasing.

    Since this number can be very large, she want to know it modulo 109 + 7.

    Duff is not a programmer, and Malek is unavailable at the moment. So she asked for your help. Please tell her this number.

    Input

    The first line of input contains three integers, n, l and k (1 ≤ n, kn × k ≤ 106 and 1 ≤ l ≤ 1018).

    The second line contains n space separated integers, a0, a1, ..., an - 1 (1 ≤ ai ≤ 109 for each 0 ≤ i ≤ n - 1).

    Output

    Print the answer modulo 1 000 000 007 in one line.

    Sample test(s)
    input
    3 5 3
    5 9 1
    
    output
    10
    
    input
    5 10 3
    1 2 3 4 5
    
    output
    25
    
    Note

    In the first sample case, . So all such sequences are:  and .


    有点类似前几场一个题 一个区间复制好多次求最长不下降序列长度 然而还是没过那个题

    这个要求就是必须在连续段里选择

    先给a排一下序

    所以sum[i][j]表示总长度为i,最后一位是第j个数时的方案

    一开始以为

    sum[i][j]=sigma[i-1][j]

    sigma[i][j]=sigma[i][j-1]+sum[i][j]

    其实这样是错误的

    因为可能出现重复数字的情况

    比如

    2 5 3

    1 1

    sum[1][1]=sum[1][2]=1;

    sum[2][1]=2;不是1

    所以应该找到数组中小于等于自己的最大的那个pos

    =sigma[i-1][pos]就对了


    然后分两种情况

    如果有不能正好分完的情况

    1.需要的组数全在正好分完的组里挑

    2.需要的组数中最后一组在不完整的最后那组里选,其他的在完整的组里选


    还要注意一点 long long a = 两个int相乘时 需要在第一个int前面先强制转换成long long 再乘


    参见代码

    #include<bits/stdc++.h>
    using namespace std;
    const int mod = 1e9+7;
    const int lim=1e6+10;
    long long m,n;
    long long l;
    int f[lim];
    int g[lim];
    long long shengxia;
    int need[lim];
    vector<long long>sum[lim],sigma[lim];
    long long duan;
    
    int main()
    {
        //freopen("1.in","r",stdin);
        //freopen("1.out","w",stdout);
        cin>>m>>l>>n;
        for(int i=1;i<=m;i++)
        {
            //cin>>f[i];
            scanf("%d",&f[i]);
        }
        shengxia = l%m;
        for(int i=1;i<=shengxia;i++)
            g[i]=f[i];
        sort(f+1,f+m+1);
        sort(g+1,g+shengxia+1);
        for(int i=1;i<=m;i++)
        {
            need[i-1]=upper_bound(f+1,f+m+1,f[i])-f-2;
        }
        long long pre = l/m;
        long long duan=min((long long)n,(long long)pre+(l%m==0?0:1));
        //cout<<duan<<" "<<shengxia<<" "<<pre<<endl;
        for(int i=0;i<duan;i++)
        {
            int len = i+1;
            for(int j=0;j<m;j++)
            {
                if(len==1)
                    sum[len].push_back(1);
                else
                    sum[len].push_back(sigma[len-1][need[j]]%mod);
    //cout<<"sum["<<len<<"]["<<sum[len].size()-1<<"]="<<sum[len][sum[len].size()-1]<<endl;
                if(j==0)
                    sigma[len].push_back(sum[len][j]%mod);
                else
                    sigma[len].push_back((sigma[len][j-1]+sum[len][j])%mod);
    
            }
        }
        long long ans=0;
    
        for(int i=1;i<=duan&&i<=pre;i++)
            for(int j=0;j<m;j++)
            {
    //cout<<" A="<<pre-i+1<<" i="<<i<<" num="<<sum[i][j]<<endl;
                    int value=f[i];
                    ans=((long long)ans+(long long)(((pre-i+1)%mod)*sum[i][j]%mod))%mod;
    //cout<<ans<<endl;
            }
        if(shengxia!=0)
        {
            ans=(ans+shengxia)%mod;
    //cout<<"ans="<<ans<<endl;
            for(int i=1;i<=duan-1 && i<=pre;i++)
            {
                for(int j=1;j<=shengxia;j++)
                {
                    int value=g[j];
                    int pos=upper_bound(f+1,f+m+1,value)-f-2;
    //cout<<"pos="<<pos<<endl;
    //cout<<g[j]<<" "<<f[pos+1]<<endl;
    //cout<<"simga["<<i<<"]["<<pos<<"]="<<sigma[i][pos]<<endl;
    //cout<<"value="<<value<<" pos="<<pos<<" sigma="<<sigma[i][pos-1]<<endl;
                    ans=((long long)ans+(long long)(sigma[i][pos]))%mod;
    //cout<<"i="<<i<<" ans="<<ans<<endl;
                }
            }
        }
        cout<<ans%mod<<endl;
    }



  • 相关阅读:
    Bash
    FireDAC
    忽然看到字符汉字特殊字符在计算机中的存储方式
    Windows环境下使用Nginx搭建负载均衡
    Session跨域、Session共享、Mode=StateSever方式解决问题
    原生Js在各大浏览器上、火狐、ie、谷歌、360等出现的不兼容问题。
    Sina 新浪Ip归属地Api 很好用的,使用get请求
    前端页面使用 Json对象与Json字符串之间的互相转换
    使用bootstrap 弹出效果演示
    Mvc自定义路由让支持.html的格式
  • 原文地址:https://www.cnblogs.com/abgnwl/p/6550337.html
Copyright © 2020-2023  润新知