工艺路线建立——BAPI_ROUTING_CREATE

运行效果：

代码：

*&---------------------------------------------------------------------*
*& Report ZPPRTEST
*&---------------------------------------------------------------------*
*&
*&---------------------------------------------------------------------*
REPORT ZPPRTEST.

DATA: l_plnnr TYPE plnnr.

DATA: lt_plko TYPE TABLE OF bapi1012_tsk_c,
      lt_mapl TYPE TABLE OF bapi1012_mtk_c,
      lt_plpo TYPE TABLE OF bapi1012_opr_c,
      lt_subplpo TYPE TABLE OF bapi1012_sub_opr_c,
      lt_bom TYPE TABLE OF bapi1012_com_c,
      lt_msg TYPE TABLE OF bapiret2,
      ls_plko TYPE bapi1012_tsk_c,
      ls_mapl TYPE bapi1012_mtk_c,
      ls_plpo TYPE bapi1012_opr_c,
      ls_subplpo TYPE bapi1012_sub_opr_c,
      ls_bom TYPE bapi1012_com_c,
      ls_msg TYPE bapiret2.

***表头***
ls_plko-valid_from = sy-datum.  "生效日期
ls_plko-valid_to_date = '99991231'. "有效期限
ls_plko-plant = '2000'.               "工厂
ls_plko-task_list_usage = '1'.      "用途
ls_plko-task_list_status = '4'.      "状态
ls_plko-task_measure_unit = 'PCS'.  "单位
ls_plko-lot_size_from = 0.         "批量下限
ls_plko-lot_size_to = 99999999. "批量上限
APPEND ls_plko TO lt_plko.CLEAR ls_plko.

***物料指派***
ls_mapl-material_long = 'CTCZ0185-S2V-3'.
ls_mapl-plant = '2000'.
ls_mapl-valid_from = sy-datum.
ls_mapl-valid_to_date = '99991231'.
APPEND ls_mapl TO lt_mapl.CLEAR ls_mapl.

***作业***
ls_plpo-activity = '0010'.
ls_plpo-denominator = 1. "用于转换工艺路线和工序单位的分母
ls_plpo-nominator = 1.  "用于转换任务清单和工序计量单位的计数器
ls_plpo-work_cntr = '23001'.  "工作中心
ls_plpo-control_key = 'ZP10'.  "控制码
ls_plpo-standard_text_key = '1050'.  "标准内文码
ls_plpo-base_quantity = 1.  "基础数量
ls_plpo-operation_measure_unit = 'PCS'.  "单位
ls_plpo-std_value_01 = 60.
ls_plpo-std_value_02 = '77.140'.
ls_plpo-std_value_03 = 0.
ls_plpo-std_value_04 = 10. "制程时间
ls_plpo-std_unit_04 = '10'.  "天数单位
ls_plpo-scrap_factor = 0.
ls_plpo-valid_from = sy-datum.
ls_plpo-valid_to_date = '99991231'.
ls_plpo-cost_relevant = 'X'.
APPEND ls_plpo TO lt_plpo.CLEAR ls_plpo.

ls_plpo-activity = '0020'.
ls_plpo-denominator = 1. "用于转换工艺路线和工序单位的分母
ls_plpo-nominator = 1.  "用于转换任务清单和工序计量单位的计数器
ls_plpo-work_cntr = 'DP2031'.  "工作中心
ls_plpo-control_key = 'ZP02'.  "控制码
ls_plpo-standard_text_key = 'M231'.  "标准内文码
ls_plpo-base_quantity = 600.  "基础数量
ls_plpo-operation_measure_unit = 'PCS'.  "单位
ls_plpo-std_value_01 = 1.
ls_plpo-std_value_02 = 0.
ls_plpo-std_value_03 = 1.
ls_plpo-std_value_04 = 0.
ls_plpo-scrap_factor = '0.5'.
ls_plpo-valid_from = sy-datum.
ls_plpo-valid_to_date = '99991231'.
ls_plpo-cost_relevant = 'X'.
APPEND ls_plpo TO lt_plpo.CLEAR ls_plpo.

***子作业***
ls_subplpo-sub_activity = '0011'.
ls_subplpo-activity = '0010'.
ls_subplpo-denominator = 1. "用于转换工艺路线和工序单位的分母
ls_subplpo-nominator = 1.  "用于转换任务清单和工序计量单位的计数器
ls_subplpo-work_cntr = '31001'.  "工作中心
ls_subplpo-control_key = 'ZP10'.  "控制码
ls_subplpo-standard_text_key = '1061'.  "标准内文码
ls_subplpo-base_quantity = 20.  "基础数量
ls_subplpo-operation_measure_unit = 'PCS'.  "单位
ls_subplpo-std_value_01 = 35.
ls_subplpo-std_value_02 = 35.
ls_subplpo-std_value_03 = 0.
ls_subplpo-std_value_04 = 0.
ls_subplpo-scrap_factor = 0.
ls_subplpo-valid_from = sy-datum.
ls_subplpo-valid_to_date = '99991231'.
ls_subplpo-cost_relevant = 'X'.
APPEND ls_subplpo TO lt_subplpo.CLEAR ls_subplpo.

***组件分配***
ls_bom-valid_from = sy-datum.
ls_bom-valid_to_date = '99991231'.
ls_bom-bom_type = ls_bom-bom_type_root = 'M'. "STKO-STLTY
ls_bom-activity = '0010'. "工艺路线作业序号
ls_bom-item_id = '00000001'.  "STPO-STLKN
ls_bom-bom_no = ls_bom-bom_no_root = '00007871'. "STKO-STLNR
ls_bom-alternative_bom = ls_bom-alternative_bom_root = '01'. "STKO-STLAL
ls_bom-item_no = '0010'. "STPO-POSNR
ls_bom-plant = '2000'.
APPEND ls_bom TO lt_bom.CLEAR ls_bom.

ls_bom-valid_from = sy-datum.
ls_bom-valid_to_date = '99991231'.
ls_bom-bom_type = ls_bom-bom_type_root = 'M'.  "STKO-STLTY
ls_bom-activity = '0010'.  "工艺路线作业序号
ls_bom-item_id = '00000002'. "STPO-STLKN
ls_bom-bom_no = ls_bom-bom_no_root = '00007871'.  "STKO-STLNR
ls_bom-alternative_bom = ls_bom-alternative_bom_root = '01'. "STKO-STLAL
ls_bom-item_no = '0020'.  "STPO-POSNR
ls_bom-plant = '2000'.
APPEND ls_bom TO lt_bom.CLEAR ls_bom.

ls_bom-valid_from = sy-datum.
ls_bom-valid_to_date = '99991231'.
ls_bom-bom_type = ls_bom-bom_type_root = 'M'.  "STKO-STLTY
ls_bom-activity = '0020'.  "工艺路线作业序号
ls_bom-item_id = '00000003'.  "STPO-STLKN
ls_bom-bom_no = ls_bom-bom_no_root = '00007871'.  "STKO-STLNR
ls_bom-alternative_bom = ls_bom-alternative_bom_root = '01'. "STKO-STLAL
ls_bom-item_no = '0030'.  "STPO-POSNR
ls_bom-plant = '2000'.
ls_bom-order_lvl = '01'. "虚拟件使用
ls_bom-order_path = '01'.  "虚拟件使用
ls_bom-path = '000001'.  "虚拟件使用
APPEND ls_bom TO lt_bom.CLEAR ls_bom.

CALL FUNCTION 'BAPI_ROUTING_CREATE'
* EXPORTING
*   testrun                     = ' '
*   profile                      =
*   bomusage                =
*   application                =
  IMPORTING
    group                       = l_plnnr
*   groupcounter            =
  TABLES
    task                            = lt_plko
    materialtaskallocation  = lt_mapl
*   sequence                    =
    operation                    = lt_plpo
    suboperation               = lt_subplpo
*   referenceoperation      =
*   workcenterreference    =
    componentallocation    = lt_bom
*   productionresource      =
*   inspcharacteristic          =
*   textallocation               =
*   text                             =
    return                         = lt_msg
*   task_segment                 =
          .

READ TABLE lt_msg INTO ls_msg WITH KEY type = 'E'.
IF sy-subrc = 0.
  ROLLBACK WORK.
ELSE.
  COMMIT WORK.
ENDIF.
cl_demo_output=>write( l_plnnr ).
cl_demo_output=>write( lt_msg ).
cl_demo_output=>display(  ).