Binder之启动ServiceManager

一. 概述

ServiceManager是Binder IPC通信过程中的守护进程，本身也是一个Binder服务，但并没有采用libbinder中的多线程模型来与Binder驱动通信，而是自行编写了binder.c直接和Binder驱动来通信，并且只有一个循环binder_loop来进行读取和处理事务，这样的好处是简单而高效。

ServiceManager本身工作相对简单，其功能：查询和注册服务。对于Binder IPC通信过程中，其实更多的情形是BpBinder和BBinder之间的通信，比如ActivityManagerProxy和ActivityManagerService之间的通信等。

1.1 流程图

create_servicemanager

启动过程主要以下几个阶段：

打开binder驱动：binder_open；
注册成为binder服务的大管家：binder_become_context_manager；
进入无限循环，处理client端发来的请求：binder_loop；

二. 启动过程

ServiceManager是由init进程通过解析init.rc文件而创建的，其所对应的可执行程序/system/bin/servicemanager，所对应的源文件是service_manager.c，进程名为/system/bin/servicemanager。

 1 service servicemanager /system/bin/servicemanager
 2     class core
 3     user system
 4     group system
 5     critical
 6     onrestart restart healthd
 7     onrestart restart zygote
 8     onrestart restart media
 9     onrestart restart surfaceflinger
10     onrestart restart drm

关于rc文件中class core和class main区别可以看

http://www.ccbu.cc/index.php/framework/51.html

https://www.cnblogs.com/SaraMoring/p/14393223.html

启动Service Manager的入口函数是service_manager.c中的main()方法，代码如下：

2.1 main

 1 //service_manager.c
 2 
 3 int main(int argc, char **argv)
 4 {
 5     struct binder_state *bs;
 6     //打开binder驱动，申请128k字节大小的内存空间 【见小节2.2】
 7     bs = binder_open(128*1024);
 8     ...
 9 
10     //成为上下文管理者 【见小节2.3】
11     if (binder_become_context_manager(bs)) {
12         return -1;
13     }
14 
15     selinux_enabled = is_selinux_enabled(); //selinux权限是否使能
16     sehandle = selinux_android_service_context_handle();
17     selinux_status_open(true);
18 
19     if (selinux_enabled > 0) {
20         if (sehandle == NULL) {  
21             abort(); //无法获取sehandle
22         }
23         if (getcon(&service_manager_context) != 0) {
24             abort(); //无法获取service_manager上下文
25         }
26     }
27     ...
28 
29     //进入无限循环，处理client端发来的请求 【见小节2.4】
30     binder_loop(bs, svcmgr_handler);
31     return 0;
32 }

2.2 binder_open

 1 //servicemanager/binder.c
 2 
 3 struct binder_state *binder_open(size_t mapsize)
 4 {
 5     struct binder_state *bs;【见小节2.2.1】
 6     struct binder_version vers;
 7 
 8     bs = malloc(sizeof(*bs));
 9     if (!bs) {
10         errno = ENOMEM;
11         return NULL;
12     }
13 
14     //通过系统调用陷入内核，打开Binder设备驱动
15     bs->fd = open("/dev/binder", O_RDWR);
16     if (bs->fd < 0) {
17         goto fail_open; // 无法打开binder设备
18     }
19 
20      //通过系统调用，ioctl获取binder版本信息
21     if ((ioctl(bs->fd, BINDER_VERSION, &vers) == -1) ||
22         (vers.protocol_version != BINDER_CURRENT_PROTOCOL_VERSION)) {
23         goto fail_open; //内核空间与用户空间的binder不是同一版本
24     }
25 
26     bs->mapsize = mapsize;
27     //通过系统调用，mmap内存映射，mmap必须是page的整数倍
28     bs->mapped = mmap(NULL, mapsize, PROT_READ, MAP_PRIVATE, bs->fd, 0);
29     if (bs->mapped == MAP_FAILED) {
30         goto fail_map; // binder设备内存无法映射
31     }
32 
33     return bs;
34 
35 fail_map:
36     close(bs->fd);
37 fail_open:
38     free(bs);
39     return NULL;
40 }

打开binder驱动相关操作:

先调用open()打开binder设备，open()方法经过系统调用，进入Binder驱动，然后调用方法binder_open()，该方法会在Binder驱动层创建一个binder_proc对象，再将binder_proc对象赋值给fd->private_data，同时放入全局链表binder_procs。再通过ioctl()检验当前binder版本与Binder驱动层的版本是否一致。

调用mmap()进行内存映射，同理mmap()方法经过系统调用，对应于Binder驱动层的binder_mmap()方法，该方法会在Binder驱动层创建Binder_buffer对象，并放入当前binder_proc的proc->buffers链表。

2.2.1 binder_state

1 //servicemanager/binder.c
2 
3 struct binder_state
4 {
5     int fd; // dev/binder的文件描述符
6     void *mapped; //指向mmap的内存地址
7     size_t mapsize; //分配的内存大小，默认为128KB
8 };

2.3 binder_become_context_manager

1 // servicemanager/binder.c
2 
3 int binder_become_context_manager(struct binder_state *bs)
4 {
5     //通过ioctl，传递BINDER_SET_CONTEXT_MGR指令【见小节2.3.1】
6     return ioctl(bs->fd, BINDER_SET_CONTEXT_MGR, 0);
7 }

成为上下文的管理者，整个系统中只有一个这样的管理者。通过ioctl()方法经过系统调用，对应于Binder驱动层的binder_ioctl()方法.

2.3.1 binder_ioctl

 1 //kernel/drivers/android/binder.c
 2 
 3 static long binder_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 4 {
 5     binder_lock(__func__);
 6     switch (cmd) {
 7       case BINDER_SET_CONTEXT_MGR:
 8           ret = binder_ioctl_set_ctx_mgr(filp);//【见小节2.3.2】
 9           break;
10       }
11       case :...
12     }
13     binder_unlock(__func__);
14 }

根据参数BINDER_SET_CONTEXT_MGR，最终调用binder_ioctl_set_ctx_mgr()方法，这个过程会持有binder_main_lock。

2.3.2 binder_ioctl_set_ctx_mgr

 1 //kernel/drivers/android/binder.c
 2 
 3 static int binder_ioctl_set_ctx_mgr(struct file *filp)
 4 {
 5     int ret = 0;
 6     struct binder_proc *proc = filp->private_data;
 7     kuid_t curr_euid = current_euid();
 8 
 9     //保证只创建一次mgr_node对象
10     if (binder_context_mgr_node != NULL) {
11         ret = -EBUSY; 
12         goto out;
13     }
14 
15     if (uid_valid(binder_context_mgr_uid)) {
16         ...
17     } else {
18         //设置当前线程euid作为Service Manager的uid
19         binder_context_mgr_uid = curr_euid;
20     }
21 
22     //创建ServiceManager实体【见小节2.3.3】
23     binder_context_mgr_node = binder_new_node(proc, 0, 0);
24     ...
25     binder_context_mgr_node->local_weak_refs++;
26     binder_context_mgr_node->local_strong_refs++;
27     binder_context_mgr_node->has_strong_ref = 1;
28     binder_context_mgr_node->has_weak_ref = 1;
29 out:
30     return ret;
31 }

进入binder驱动，在Binder驱动中定义的静态变量

// service manager所对应的binder_node;
static struct binder_node *binder_context_mgr_node;
// 运行service manager的线程uid
static kuid_t binder_context_mgr_uid = INVALID_UID;

创建了全局的binder_node对象binder_context_mgr_node，并将binder_context_mgr_node的强弱引用各加1.

2.3.3 binder_new_node

 1 //kernel/drivers/android/binder.c
 2 
 3 static struct binder_node *binder_new_node(struct binder_proc *proc,
 4                        binder_uintptr_t ptr,
 5                        binder_uintptr_t cookie)
 6 {
 7     struct rb_node **p = &proc->nodes.rb_node;
 8     struct rb_node *parent = NULL;
 9     struct binder_node *node;
10     //首次进来为空
11     while (*p) {
12         parent = *p;
13         node = rb_entry(parent, struct binder_node, rb_node);
14 
15         if (ptr < node->ptr)
16             p = &(*p)->rb_left;
17         else if (ptr > node->ptr)
18             p = &(*p)->rb_right;
19         else
20             return NULL;
21     }
22 
23     //给新创建的binder_node 分配内核空间
24     node = kzalloc(sizeof(*node), GFP_KERNEL);
25     if (node == NULL)
26         return NULL;
27     binder_stats_created(BINDER_STAT_NODE);
28     // 将新创建的node对象添加到proc红黑树；
29     rb_link_node(&node->rb_node, parent, p);
30     rb_insert_color(&node->rb_node, &proc->nodes);
31     node->debug_id = ++binder_last_id;
32     node->proc = proc;
33     node->ptr = ptr;
34     node->cookie = cookie;
35     node->work.type = BINDER_WORK_NODE; //设置binder_work的type
36     INIT_LIST_HEAD(&node->work.entry);
37     INIT_LIST_HEAD(&node->async_todo);
38     return node;
39 }

在Binder驱动层创建binder_node结构体对象，并将当前binder_proc加入到binder_node的node->proc。并创建binder_node的async_todo和binder_work两个队列。

2.4 binder_loop

 1 //servicemanager/binder.c
 2 
 3 void binder_loop(struct binder_state *bs, binder_handler func)
 4 {
 5     int res;
 6     struct binder_write_read bwr;
 7     uint32_t readbuf[32];
 8 
 9     bwr.write_size = 0;
10     bwr.write_consumed = 0;
11     bwr.write_buffer = 0;
12 
13     readbuf[0] = BC_ENTER_LOOPER;
14     //将BC_ENTER_LOOPER命令发送给binder驱动，让Service Manager进入循环 【见小节2.4.1】
15     binder_write(bs, readbuf, sizeof(uint32_t));
16 
17     for (;;) {
18         bwr.read_size = sizeof(readbuf);
19         bwr.read_consumed = 0;
20         bwr.read_buffer = (uintptr_t) readbuf;
21 
22         res = ioctl(bs->fd, BINDER_WRITE_READ, &bwr); //进入循环，不断地binder读写过程
23         if (res < 0) {
24             break;
25         }
26 
27         // 解析binder信息 【见小节2.5】
28         res = binder_parse(bs, 0, (uintptr_t) readbuf, bwr.read_consumed, func);
29         if (res == 0) {
30             break;
31         }
32         if (res < 0) {
33             break;
34         }
35     }
36 }

进入循环读写操作，由main()方法传递过来的参数func指向svcmgr_handler。

binder_write通过ioctl()将BC_ENTER_LOOPER命令发送给binder驱动，此时bwr只有write_buffer有数据，进入binder_thread_write()方法。接下来进入for循环，执行ioctl()，此时bwr只有read_buffer有数据，那么进入binder_thread_read()方法。

2.4.1 binder_write

 1 //servicemanager/binder.c
 2 
 3 int binder_write(struct binder_state *bs, void *data, size_t len)
 4 {
 5     struct binder_write_read bwr;
 6     int res;
 7 
 8     bwr.write_size = len;
 9     bwr.write_consumed = 0;
10     bwr.write_buffer = (uintptr_t) data; //此处data为BC_ENTER_LOOPER
11     bwr.read_size = 0;
12     bwr.read_consumed = 0;
13     bwr.read_buffer = 0;
14     //【见小节2.4.2】
15     res = ioctl(bs->fd, BINDER_WRITE_READ, &bwr);
16     return res;
17 }

根据传递进来的参数，初始化bwr，其中write_size大小为4，write_buffer指向缓冲区的起始地址，其内容为BC_ENTER_LOOPER请求协议号。通过ioctl将bwr数据发送给binder驱动，则调用其binder_ioctl方法，如下：

2.4.2 binder_ioctl

 1 //kernel/drivers/android/binder.c
 2 
 3 static long binder_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 4 {
 5     int ret;
 6     struct binder_proc *proc = filp->private_data;
 7     struct binder_thread *thread;
 8     ret = wait_event_interruptible(binder_user_error_wait, binder_stop_on_user_error < 2);
 9     ...
10 
11     binder_lock(__func__);
12     thread = binder_get_thread(proc); //获取binder_thread
13     switch (cmd) {
14       case BINDER_WRITE_READ:  //进行binder的读写操作
15           ret = binder_ioctl_write_read(filp, cmd, arg, thread); //【见小节2.4.3】
16           if (ret)
17               goto err;
18           break;
19       case ...
20     }
21     ret = 0;
22 
23 err:
24     if (thread)
25         thread->looper &= ~BINDER_LOOPER_STATE_NEED_RETURN;
26     binder_unlock(__func__);
27      ...
28     return ret;
29 }

2.4.3 binder_ioctl_write_read

 1 //kernel/drivers/android/binder.c
 2 
 3 static int binder_ioctl_write_read(struct file *filp,
 4                 unsigned int cmd, unsigned long arg,
 5                 struct binder_thread *thread)
 6 {
 7     int ret = 0;
 8     struct binder_proc *proc = filp->private_data;
 9     void __user *ubuf = (void __user *)arg;
10     struct binder_write_read bwr;
11 
12     if (copy_from_user(&bwr, ubuf, sizeof(bwr))) { //把用户空间数据ubuf拷贝到bwr
13         ret = -EFAULT;
14         goto out;
15     }
16 
17     if (bwr.write_size > 0) { //此时写缓存有数据【见小节2.4.4】
18         ret = binder_thread_write(proc, thread,
19                   bwr.write_buffer, bwr.write_size, &bwr.write_consumed);
20         ...
21     }
22 
23     if (bwr.read_size > 0) { //此时读缓存无数据
24         ...
25     }
26 
27     if (copy_to_user(ubuf, &bwr, sizeof(bwr))) { //将内核数据bwr拷贝到用户空间ubuf
28         ret = -EFAULT;
29         goto out;
30     }
31 out:
32     return ret;
33 }

此处将用户空间的binder_write_read结构体拷贝到内核空间.

2.4.4 binder_thread_write

 1 //kernel/drivers/android/binder.c
 2 
 3 static int binder_thread_write(struct binder_proc *proc,
 4       struct binder_thread *thread,
 5       binder_uintptr_t binder_buffer, size_t size,
 6       binder_size_t *consumed)
 7 {
 8   uint32_t cmd;
 9   void __user *buffer = (void __user *)(uintptr_t)binder_buffer;
10   void __user *ptr = buffer + *consumed;
11   void __user *end = buffer + size;
12   
13   while (ptr < end && thread->return_error == BR_OK) {
14     get_user(cmd, (uint32_t __user *)ptr); //获取命令
15     switch (cmd) {
16       case BC_ENTER_LOOPER:
17           //设置该线程的looper状态
18           thread->looper |= BINDER_LOOPER_STATE_ENTERED;
19           break;
20       case ...;
21     }
22   }    }

从bwr.write_buffer拿出cmd数据,此处为BC_ENTER_LOOPER. 可见上层本次调用binder_write()方法，主要是完成设置当前线程的looper状态为BINDER_LOOPER_STATE_ENTERED。

2.5 binder_parse

 1 //servicemanager/binder.c
 2 
 3 int binder_parse(struct binder_state *bs, struct binder_io *bio,
 4                  uintptr_t ptr, size_t size, binder_handler func)
 5 {
 6     int r = 1;
 7     uintptr_t end = ptr + (uintptr_t) size;
 8 
 9     while (ptr < end) {
10         uint32_t cmd = *(uint32_t *) ptr;
11         ptr += sizeof(uint32_t);
12         switch(cmd) {
13         case BR_NOOP:  //无操作，退出循环
14             break;
15         case BR_TRANSACTION_COMPLETE:
16             break;
17         case BR_INCREFS:
18         case BR_ACQUIRE:
19         case BR_RELEASE:
20         case BR_DECREFS:
21             ptr += sizeof(struct binder_ptr_cookie);
22             break;
23         case BR_TRANSACTION: {
24             struct binder_transaction_data *txn = (struct binder_transaction_data *) ptr;
25             ...
26             binder_dump_txn(txn);
27             if (func) {
28                 unsigned rdata[256/4];
29                 struct binder_io msg; 
30                 struct binder_io reply;
31                 int res;
32                 //【见小节2.5.1】
33                 bio_init(&reply, rdata, sizeof(rdata), 4);
34                 bio_init_from_txn(&msg, txn); //从txn解析出binder_io信息
35                  //【见小节2.6】
36                 res = func(bs, txn, &msg, &reply);
37                 //【见小节3.4】
38                 binder_send_reply(bs, &reply, txn->data.ptr.buffer, res);
39             }
40             ptr += sizeof(*txn);
41             break;
42         }
43         case BR_REPLY: {
44             struct binder_transaction_data *txn = (struct binder_transaction_data *) ptr;
45             ...
46             binder_dump_txn(txn);
47             if (bio) {
48                 bio_init_from_txn(bio, txn);
49                 bio = 0;
50             }
51             ptr += sizeof(*txn);
52             r = 0;
53             break;
54         }
55         case BR_DEAD_BINDER: {
56             struct binder_death *death = (struct binder_death *)(uintptr_t) *(binder_uintptr_t *)ptr;
57             ptr += sizeof(binder_uintptr_t);
58             // binder死亡消息【见小节3.3】
59             death->func(bs, death->ptr);
60             break;
61         }
62         case BR_FAILED_REPLY:
63             r = -1;
64             break;
65         case BR_DEAD_REPLY:
66             r = -1;
67             break;
68         default:
69             return -1;
70         }
71     }
72     return r;
73 }

解析binder信息，此处参数ptr指向BC_ENTER_LOOPER，func指向svcmgr_handler。故有请求到来，则调用svcmgr_handler。

2.5.1 bio_init

 1 //servicemanager/binder.c
 2 
 3 void bio_init(struct binder_io *bio, void *data,
 4               size_t maxdata, size_t maxoffs)
 5 {
 6     size_t n = maxoffs * sizeof(size_t);
 7     if (n > maxdata) {
 8         ...
 9     }
10 
11     bio->data = bio->data0 = (char *) data + n;
12     bio->offs = bio->offs0 = data;
13     bio->data_avail = maxdata - n;
14     bio->offs_avail = maxoffs;
15     bio->flags = 0;
16 }

其中

struct binder_io
{
   char *data;            /* pointer to read/write from */
   binder_size_t *offs;   /* array of offsets */
   size_t data_avail;     /* bytes available in data buffer */
   size_t offs_avail;     /* entries available in offsets array */

   char *data0;           //data buffer起点位置
   binder_size_t *offs0;  //buffer偏移量的起点位置
   uint32_t flags;
   uint32_t unused;
};

2.5.2 bio_init_from_txn

 1 //servicemanager/binder.c
 2 
 3 void bio_init_from_txn(struct binder_io *bio, struct binder_transaction_data *txn)
 4 {
 5     bio->data = bio->data0 = (char *)(intptr_t)txn->data.ptr.buffer;
 6     bio->offs = bio->offs0 = (binder_size_t *)(intptr_t)txn->data.ptr.offsets;
 7     bio->data_avail = txn->data_size;
 8     bio->offs_avail = txn->offsets_size / sizeof(size_t);
 9     bio->flags = BIO_F_SHARED;
10 }

将readbuf的数据赋给bio对象的data

2.6 svcmgr_handler

 1 //service_manager.c
 2 
 3 int svcmgr_handler(struct binder_state *bs,
 4                    struct binder_transaction_data *txn,
 5                    struct binder_io *msg,
 6                    struct binder_io *reply)
 7 {
 8     struct svcinfo *si; //【见小节2.6.1】
 9     uint16_t *s;
10     size_t len;
11     uint32_t handle;
12     uint32_t strict_policy;
13     int allow_isolated;
14     ...
15     
16     strict_policy = bio_get_uint32(msg);
17     s = bio_get_string16(msg, &len);
18     ...
19 
20     switch(txn->code) {
21     case SVC_MGR_GET_SERVICE:
22     case SVC_MGR_CHECK_SERVICE: 
23         s = bio_get_string16(msg, &len); //服务名
24         //根据名称查找相应服务 【见小节3.1】
25         handle = do_find_service(bs, s, len, txn->sender_euid, txn->sender_pid);
26         //【见小节3.1.2】
27         bio_put_ref(reply, handle);
28         return 0;
29 
30     case SVC_MGR_ADD_SERVICE: 
31         s = bio_get_string16(msg, &len); //服务名
32         handle = bio_get_ref(msg); //handle【见小节3.2.3】
33         allow_isolated = bio_get_uint32(msg) ? 1 : 0;
34          //注册指定服务 【见小节3.2】
35         if (do_add_service(bs, s, len, handle, txn->sender_euid,
36             allow_isolated, txn->sender_pid))
37             return -1;
38         break;
39 
40     case SVC_MGR_LIST_SERVICES: {  
41         uint32_t n = bio_get_uint32(msg);
42 
43         if (!svc_can_list(txn->sender_pid)) {
44             return -1;
45         }
46         si = svclist;
47         while ((n-- > 0) && si)
48             si = si->next;
49         if (si) {
50             bio_put_string16(reply, si->name);
51             return 0;
52         }
53         return -1;
54     }
55     default:
56         return -1;
57     }
58 
59     bio_put_uint32(reply, 0);
60     return 0;
61 }

该方法的功能：查询服务，注册服务，以及列举所有服务

2.6.1 svcinfo

struct svcinfo
{
   struct svcinfo *next;
   uint32_t handle; //服务的handle值
   struct binder_death death;
   int allow_isolated;
   size_t len; //名字长度
   uint16_t name[0]; //服务名
};

每一个服务用svcinfo结构体来表示，该handle值是在注册服务的过程中，由服务所在进程那一端所确定的。

最新R版本发现该代码已经全部删除，具体Servicemanager实现待重新梳理。。。。。。。。。

原文链接：http://gityuan.com/tags/#binder

相关阅读:
[转载]浅谈多态机制的意义及实现
 [转载]浅析Java虚拟机结构与机制
 为什么调用 FragmentPagerAdapter.notifyDataSetChanged() 并不能更新其 Fragment？
Android-- FragmentStatePagerAdapter分页
 android-点击空白或点击除EditText之外的控件隐藏软键盘
 populating-next-right-pointers-in-each-node
roman-to-integer
same-tree
palindrome-number
best-time-to-buy-and-sell-stock
原文地址：https://www.cnblogs.com/SaraMoring/p/14393157.html