用stm32cube生成工程的时候，要配置各个时钟，之前一直沿用的模板例程，所以还真不知道各个时钟到底是多少。上图，这是要配置的，可是自己程序配置的是怎样呢？
接下来，看程序，程序开始
1 startup_stm32f40_41xxx.s
1 Reset_Handler PROC 2 EXPORT Reset_Handler [WEAK] 3 IMPORT SystemInit 4 IMPORT __main 5 6 LDR R0, =SystemInit 7 BLX R0 8 LDR R0, =__main 9 BX R0 10 ENDP
在进入main函数之前,系统调用了SystemInit函数.
2 system_stm32f4xx.c
在SystemInit里截取一段程序
1 /* Configure the System clock source, PLL Multiplier and Divider factors, 2 AHB/APBx prescalers and Flash settings ----------------------------------*/ 3 SetSysClock();
注释：配置系统时钟源，....
进入SetSysClock();
1 static void SetSysClock(void) 2 { 3 .... 4 5 /* HCLK = SYSCLK / 1*/ 6 RCC->CFGR |= RCC_CFGR_HPRE_DIV1; 7 8 9 #if defined (STM32F40_41xxx) || defined (STM32F427_437xx) || defined (STM32F429_439xx) 10 /* PCLK2 = HCLK / 2* 11 RCC->CFGR |= RCC_CFGR_PPRE2_DIV2; 12 13 /* PCLK1 = HCLK / 4*/ 14 RCC->CFGR |= RCC_CFGR_PPRE1_DIV4; 15 #endif /* STM32F40_41xxx || STM32F427_437x || STM32F429_439xx */ 16 .... 17 /* Configure the main PLL */ 18 RCC->PLLCFGR = PLL_M | (PLL_N << 6) | (((PLL_P >> 1) -1) << 16) | 19 (RCC_PLLCFGR_PLLSRC_HSE) | (PLL_Q << 24); 20 21 /* Enable the main PLL */ 22 RCC->CR |= RCC_CR_PLLON; 23 }
可以知道HCLK = SYSCLK/1，PCLK2 = HCLK / 2,PCLK1 = HCLK / 4。接下来就和M,P,Q有关了
这些值在前边有define，以我的工程为例
1 .... 2 #if defined (STM32F40_41xxx) || defined (STM32F427_437xx) || defined (STM32F429_439xx) || defined (STM32F401xx) 3 /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N */ 4 #define PLL_M 8 5 #else /* STM32F411xE */ 6 ...... 7 /* USB OTG FS, SDIO and RNG Clock = PLL_VCO / PLLQ */ 8 #define PLL_Q 7 9 10 #if defined (STM32F40_41xxx) 11 #define PLL_N 336 12 /* SYSCLK = PLL_VCO / PLL_P */ 13 #define PLL_P 2 14 #endif /* STM32F40_41xxx */ 15 ....
至此就差一项还不知道了，就是外部晶振频率，它在stm32f4xx.h中有定义，
#if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ /** * @brief In the following line adjust the External High Speed oscillator (HSE) Startup Timeout value */ #if !defined (HSE_STARTUP_TIMEOUT) #define HSE_STARTUP_TIMEOUT ((uint16_t)0x05000) /*!< Time out for HSE start up */ #endif /* HSE_STARTUP_TIMEOUT */ #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI_VALUE */
综合这些，就可以刻第一幅图对应起来了。