3.3. 安装前检查
|
1.检查节点连通性 或：./runcluvfy.sh stage -pre crsinst -n linuxrac1,linuxrac2 -fixup -verbose |
|
[grid@linuxrac1 grid]$ ./runcluvfy.sh stage -post hwos -n linuxrac1,linuxrac2 -verbose Performing post-checks for hardware and operating system setup Checking node reachability... Check: Node reachability from node "linuxrac1" Destination Node Reachable? ------------------------------------ ------------------------ linuxrac1 yes linuxrac2 yes Result: Node reachability check passed from node "linuxrac1" Checking user equivalence... Check: User equivalence for user "grid" Node Name Comment ------------------------------------ ------------------------ linuxrac2 passed linuxrac1 passed Result: User equivalence check passed for user "grid" Checking node connectivity... Checking hosts config file... Node Name Status Comment ------------ ------------------------ ------------------------ linuxrac2 passed linuxrac1 passed
Verification of the hosts config file successful Interface information for node "linuxrac2" Name IP Address Subnet Gateway Def. Gateway HW Address MTU ------ --------------- --------------- --------------- --------------- ----------------- ------ eth0 10.10.97.167 10.10.97.0 0.0.0.0 10.10.97.232 00:0C:29:E8:8D:F9 1500 eth1 192.168.2.216 192.168.2.0 0.0.0.0 10.10.97.232 00:0C:29:E8:8D:03 1500
Interface information for node "linuxrac1" Name IP Address Subnet Gateway Def. Gateway HW Address MTU ------ --------------- --------------- --------------- --------------- ----------------- ------ eth0 10.10.97.161 10.10.97.0 0.0.0.0 10.10.97.232 00:0C:29:89:82:48 1500 eth1 192.168.2.116 192.168.2.0 0.0.0.0 10.10.97.232 00:50:56:23:6A:3E 1500
Check: Node connectivity of subnet "10.10.97.0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- linuxrac2:eth0 linuxrac1:eth0 yes Result: Node connectivity passed for subnet "10.10.97.0" with node(s) linuxrac2,linuxrac1
Check: TCP connectivity of subnet "10.10.97.0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- linuxrac1:10.10.97.161 linuxrac2:10.10.97.167 passed Result: TCP connectivity check passed for subnet "10.10.97.0"
Check: Node connectivity of subnet "192.168.2.0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- linuxrac2:eth1 linuxrac1:eth1 yes Result: Node connectivity passed for subnet "192.168.2.0" with node(s) linuxrac2,linuxrac1
Check: TCP connectivity of subnet "192.168.2.0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- linuxrac1:192.168.2.116 linuxrac2:192.168.2.216 passed Result: TCP connectivity check passed for subnet "192.168.2.0"
Interfaces found on subnet "10.10.97.0" that are likely candidates for VIP are: linuxrac2 eth0:10.10.97.167 linuxrac1 eth0:10.10.97.161
Interfaces found on subnet "192.168.2.0" that are likely candidates for a private interconnect are: linuxrac2 eth1:192.168.2.216 linuxrac1 eth1:192.168.2.116
Result: Node connectivity check passed
Checking for multiple users with UID value 0 Result: Check for multiple users with UID value 0 passed
Post-check for hardware and operating system setup was successful.
|
基于CentOS与VmwareStation10搭建Oracle11G RAC 64集群环境所有链接:
1.资源准备
http://www.cnblogs.com/HondaHsu/p/4046352.html
2.搭建环境-2.1创建虚拟机
http://www.cnblogs.com/HondaHsu/p/4046378.html
2.搭建环境-2.2安装操作系统CentOS5.4
http://www.cnblogs.com/HondaHsu/p/4046384.html
2.搭建环境-2.3配置共享磁盘
http://www.cnblogs.com/HondaHsu/p/4046389.html
2.搭建环境-2.4. 安装JDK
http://www.cnblogs.com/HondaHsu/p/4046430.html
2.搭建环境-2.5. 配置网络
http://www.cnblogs.com/HondaHsu/p/4046443.html
2.搭建环境-2.6. 安装Oracle所依赖的必要包
http://www.cnblogs.com/HondaHsu/p/4054216.html
2.搭建环境-2.7. 配置资源与参数
http://www.cnblogs.com/HondaHsu/p/4054238.html
2.搭建环境-2.8. 配置用户环境
http://www.cnblogs.com/HondaHsu/p/4054259.html
2.搭建环境-2.9. 配置用户等效性(可选项)
http://www.cnblogs.com/HondaHsu/p/4054277.html
2.搭建环境-2.10.配置用户NTF服务
http://www.cnblogs.com/HondaHsu/p/4054333.html
3.安装Oracle RAC-3.1.安装并配置ASM驱动
http://www.cnblogs.com/HondaHsu/p/4054367.html
3.安装Oracle RAC-3.2.安装 cvuqdisk 软件包
http://www.cnblogs.com/HondaHsu/p/4054395.html
3.安装Oracle RAC-3.3.安装前检查
http://www.cnblogs.com/HondaHsu/p/4054481.html
3.安装Oracle RAC-3.4.安装Grid Infrastructure
http://www.cnblogs.com/HondaHsu/p/4054518.html
3.安装Oracle RAC-3.5.安装oracle11gr2 database 软件与创建数据库
http://www.cnblogs.com/HondaHsu/p/4054586.html
3.安装Oracle RAC-3.6.集群管理命令
http://www.cnblogs.com/HondaHsu/p/4054635.html
4.安装Oracle RAC FAQ-4.1.系统界面报错Gnome
http://www.cnblogs.com/HondaHsu/p/4046314.html
4.安装Oracle RAC FAQ-4.2.Oracleasm Createdisk ASM磁盘失败:Instantiating disk: failed
http://www.cnblogs.com/HondaHsu/p/4046248.html
4.安装Oracle RAC FAQ-4.3.Oracle 集群节点间连通失败
http://www.cnblogs.com/HondaHsu/p/4046263.html
4.安装Oracle RAC FAQ-4.4.无法图形化安装Grid Infrastructure
http://www.cnblogs.com/HondaHsu/p/4046273.html
4.安装Oracle RAC FAQ-4.5.安装Grid，创建ASM磁盘组空间不足
http://www.cnblogs.com/HondaHsu/p/4046285.html
4.安装Oracle RAC FAQ-4.6.重新配置与缷载11R2 Grid Infrastructure
http://www.cnblogs.com/HondaHsu/p/4046300.html
4.安装Oracle RAC FAQ-4.7.Oracle 11G R2 RAC修改public网络IP
http://www.cnblogs.com/HondaHsu/p/4054953.html