• luogu P2770 航空路线问题


    本题可以把求解的目标转换成从1到N两条不相交的路径,回想上一题,通过拆点来限制一边只能过一次,capacity为1,cost为-1来跑最大费用流,注意1点和N点的capacity要为2,因为需要过2次,答案就是最大费用流-2,本题的收获是输出路径,从每个点的出点出发(虚点)枚举其连接的下一个入点(实点),然后输出该入点,再dfs出点,如果只有一条边但有从1到N的边,也能输出答案,要考虑edge case

    #include<bits/stdc++.h>
    using namespace std;
    #define lowbit(x) ((x)&(-x))
    typedef long long LL;
    
    const int maxm = 1e5+5;
    const int INF = 0x3f3f3f3f;
    
    struct edge{
        int u, v, cap, flow, cost, nex;
    } edges[maxm];
    
    int head[maxm], cur[maxm], cnt, fa[maxm], d[maxm];
    bool inq[maxm], vis[555];
    map<string, int> cache;
    map<int, string> store;
    
    void init() {
        memset(head, -1, sizeof(head));
    }
    
    void add(int u, int v, int cap, int cost) {
        edges[cnt] = edge{u, v, cap, 0, cost, head[u]};
        head[u] = cnt++;
    }
    
    void addedge(int u, int v, int cap, int cost) {
        add(u, v, cap, cost), add(v, u, 0, -cost);
    }
    
    bool spfa(int s, int t, int &flow, LL &cost) {
        //for(int i = 0; i <= n+1; ++i) d[i] = INF; //init()
        memset(d, 63, sizeof(d));
        memset(inq, false, sizeof(inq));
        d[s] = 0, inq[s] = true;
        fa[s] = -1, cur[s] = INF;
        queue<int> q;
        q.push(s);
        while(!q.empty()) {
            int u = q.front();
            q.pop();
            inq[u] = false;
            for(int i = head[u]; i != -1; i = edges[i].nex) {
                edge& now = edges[i];
                int v = now.v;
                if(now.cap > now.flow && d[v] > d[u] + now.cost) {
                    d[v] = d[u] + now.cost;
                    fa[v] = i;
                    cur[v] = min(cur[u], now.cap - now.flow);
                    if(!inq[v]) {q.push(v); inq[v] = true;}
                }
            }
        }
        if(d[t] == INF) return false;
        flow += cur[t];
        cost += 1LL*d[t]*cur[t];
        for(int u = t; u != s; u = edges[fa[u]].u) {
            edges[fa[u]].flow += cur[t];
            edges[fa[u]^1].flow -= cur[t];
        }
        return true;
    }
    
    int MincostMaxflow(int s, int t, LL &cost) {
        cost = 0;
        int flow = 0;
        while(spfa(s, t, flow, cost));
        return flow;
    }
    
    void dfs1(int x, int N) {
        cout << store[x-N] << "
    ";
        vis[x] = true;
        for(int i = head[x]; i != -1; i = edges[i].nex) {
            int v = edges[i].v;
            if(edges[i].flow>0 && v <= N) {
                dfs1(v+N, N);
                return;
            }
        }
    }
    
    void dfs2(int x, int N) {
        vis[x] = true;
        for(int i = head[x]; i != -1; i = edges[i].nex) {
            int v = edges[i].v;
            if(edges[i].flow>0 && v <= N && !vis[v+N]) dfs2(v+N, N);
        }
        cout << store[x-N] << "
    ";
    }
    
    void run_case() {
        init();
        int N, V;
        bool flag = false;
        string str;
        cin >> N >> V;
        for(int i = 1; i <= N; ++i) {
            cin >> str;
            cache[str] = i, store[i] = str;
        }
        for(int i = 0; i < V; ++i) {
            string t1, t2;
            cin >> t1 >> t2;
            int u = cache[t1], v = cache[t2];
            if(u>v) swap(u, v);
            if(u == 1 && v == N) flag = true;
            addedge(u+N, v, 1, 0);
        }
        int s = 0, t = (N<<1)+2;
        addedge(s, 1, 2, 0), addedge(N<<1, t, 2, 0);
        for(int i = 1; i <= N; ++i) {
            if(i == 1 || i == N) addedge(i, i+N, 2, -1);
            else addedge(i, i+N, 1, -1);
        }
        LL cost = 0;
        int ans = MincostMaxflow(s, t, cost);
        if(ans == 2) {
            cout << -2-cost << "
    ";
            dfs1(1+N,N), dfs2(1+N,N);
        } else if(ans == 1 && flag) {
            cout << "2
    ";
            cout << store[1] << "
    " << store[N] << "
    " << store[1] << "
    ";
        } else {
            cout << "No Solution!
    ";
        }
    }
    
    int main() {
        ios::sync_with_stdio(false), cin.tie(0);
        run_case();
        cout.flush();
        return 0;
    }
    View Code
  • 相关阅读:
    进程和程序
    linux socket基本知识
    window核心编程 第五章 作业
    树的基本操作(C语言)
    每天都在反省自己,但是每天却都浑浑噩噩
    Windows核心编程 内核对象
    还没完整看过一本技术的书籍啊
    管道
    Memory Layout of a C Program(7.6)
    cpio命令用法
  • 原文地址:https://www.cnblogs.com/GRedComeT/p/12301309.html
Copyright © 2020-2023  润新知