• 2017 Multi-University Training Contest


    FFF at Valentine

    Time Limit: 6000/3000 MS (Java/Others)    Memory Limit: 65536/65536 K (Java/Others)
    Total Submission(s): 1060    Accepted Submission(s): 506


    Problem Description

    At Valentine's eve, Shylock and Lucar were enjoying their time as any other couples. Suddenly, LSH, Boss of FFF Group caught both of them, and locked them into two separate cells of the jail randomly. But as the saying goes: There is always a way out , the lovers made a bet with LSH: if either of them can reach the cell of the other one, then LSH has to let them go.
    The jail is formed of several cells and each cell has some special portals connect to a specific cell. One can be transported to the connected cell by the portal, but be transported back is impossible. There will not be a portal connecting a cell and itself, and since the cost of a portal is pretty expensive, LSH would not tolerate the fact that two portals connect exactly the same two cells.
    As an enthusiastic person of the FFF group, YOU are quit curious about whether the lovers can survive or not. So you get a map of the jail and decide to figure it out.
     
    Input
    Input starts with an integer T (T≤120), denoting the number of test cases.
    For each case,
    First line is two number n and m, the total number of cells and portals in the jail.(2≤n≤1000,m≤6000)
    Then next m lines each contains two integer u and v, which indicates a portal from u to v.
     
    Output
    If the couple can survive, print “I love you my love and our love save us!”
    Otherwise, print “Light my fire!”
     
    Sample Input
    3
    5 5
    1 2
    2 3
    2 4
    3 5
    4 5
    
    3 3
    1 2
    2 3
    3 1
    
    5 5
    1 2
    2 3
    3 1
    3 4
    4 5
    Sample Output
    Light my fire!
    I love you my love and our love save us!
    I love you my love and our love save us!
    Source
    分析:缩点为DAG,则如果在拓扑序中出现了有两个及以上入度为0的点则不合法
    下面给出AC代码:
      1 #include <iostream>
      2 #include <bits/stdc++.h>
      3 using namespace std;
      4 const int MAXN=1010;
      5 const int MAXM=6010;
      6 struct Edge{
      7     int to,next;
      8 }edge[MAXM],edge2[MAXM];
      9 int head[MAXN],head2[MAXN],tot,tot2;
     10 int Low[MAXN],DFN[MAXN],Stack[MAXN],Belong[MAXN];
     11 int Index,top;
     12 int scc;
     13 bool Instack[MAXN];
     14 int num[MAXN];
     15 int in[MAXN],out[MAXN];
     16 void addedge(int u,int v){
     17     edge[tot].to=v;edge[tot].next=head[u];head[u]=tot++;
     18 }
     19 void addedge2(int u,int v){
     20     edge2[tot2].to=v;edge2[tot2].next=head2[u];head2[u]=tot2++;
     21 }
     22 void Tarjan(int u){
     23     int v;
     24     Low[u]=DFN[u]=++Index;
     25     Stack[top++]=u;
     26     Instack[u]=true;
     27     for(int i=head[u];i!=-1;i=edge[i].next){
     28         v=edge[i].to;
     29         if(!DFN[v]){
     30             Tarjan(v);
     31             if(Low[u]>Low[v])Low[u]=Low[v];
     32         }
     33         else if(Instack[v]&&Low[u]>DFN[v])
     34             Low[u]=DFN[v];
     35     }
     36     if(Low[u]==DFN[u]){
     37         scc++;
     38         do{
     39             v=Stack[--top];
     40             Instack[v]=false;
     41             Belong[v]=scc;
     42             num[scc]++;
     43         }
     44         while(v!=u);
     45     }
     46 }
     47 void solve(int N){
     48     memset(DFN,0,sizeof(DFN));
     49     memset(Instack,false,sizeof(Instack));
     50     memset(num,0,sizeof(num));
     51     Index=scc=top=0;
     52     for(int i=1;i<=N;i++){
     53         if(!DFN[i])
     54             Tarjan(i);
     55     }
     56 }
     57 
     58 bool map2[MAXN][MAXN];
     59 void build(int n){
     60     memset(map2,false,sizeof(map2));
     61     memset(in,0,sizeof(in));
     62     memset(out,0,sizeof(out));
     63     memset(head2,-1,sizeof(head2));tot2=0;
     64     for(int i=1;i<=n;i++){
     65         for(int j=head[i];j!=-1;j=edge[j].next){
     66             int v=edge[j].to;
     67             int a=Belong[i];
     68             int b=Belong[v];
     69             if(a==b)continue;
     70             if(!map2[a][b]){
     71                 addedge2(a,b);
     72                 map2[a][b]=true;
     73                 in[b]++;out[a]++;
     74             }
     75         }
     76     }
     77 }
     78 
     79 void init(){
     80     tot=0;
     81     memset(head,-1,sizeof(head));
     82 }
     83 
     84 bool Top(){
     85     queue<int >q;
     86     while(!q.empty())q.pop();
     87     for(int i=1;i<=scc;i++){
     88         if(in[i]==0)q.push(i);
     89     }
     90 
     91     while(!q.empty()){
     92         if(q.size()!=1)return false;
     93         int u=q.front();
     94         q.pop();
     95         for(int i=1;i<=scc;i++){
     96             if(map2[u][i]==true) {
     97                 in[i]--;
     98                 if(in[i]==0)q.push(i);
     99             }
    100         }
    101     }
    102     return true;
    103 }
    104 
    105 int n,m;
    106 int main()
    107 {
    108     int T;
    109     scanf("%d",&T);
    110     while(T--){
    111         scanf("%d%d",&n,&m);
    112         init();
    113         for(int i=0;i<m;i++){
    114             int u,v;
    115             scanf("%d%d",&u,&v);
    116             addedge(u,v);
    117         }
    118         solve(n);
    119         build(n);
    120 
    121         if(!Top()){printf("Light my fire!
    ");}
    122         else printf("I love you my love and our love save us!
    ");
    123     }
    124 
    125     return 0;
    126 }
  • 相关阅读:
    树莓派开机启动
    树莓派连接18b20测温度
    树莓派VNC
    树莓派python 控制GPIO
    树莓派笔记
    用nohup执行python程序时,print无法输出
    mysql 函数应用
    mysql 正则表达式判断是否数字
    mysql select into 不支持
    tushare
  • 原文地址:https://www.cnblogs.com/ECJTUACM-873284962/p/7467299.html
Copyright © 2020-2023  润新知