原文地址：http://mysql.rjweb.org/doc.php/deletebig
Table of Contents
The ProblemWhy it is a Problem
InnoDB and undo
Solutions
PARTITION
Deleting in Chunks
InnoDB Chunking Recommendation
Iterating through a compound key
Reclaiming the disk space
Deleting more than half a table
Non-deterministic Replication
Replication and KILL
SBR vs RBR; Galera
Postlog
Brought to you by Rick James
The Problem
How to DELETE lots of rows from a large table? Here is an example of purging items older than 30 days:
DELETE FROM tbl WHERE ts < CURRENT_DATE() - INTERVAL 30 DAY
If there are millions of rows in the table, this statement may take minutes, maybe hours. 几百万行数据。需要几分钟甚至几小时。
Any suggestions on how to speed this up?
Why it is a Problem
⚈ MyISAM will lock the table during the entire operation, thereby nothing else can be done with the table.
⚈ InnoDB won't lock the table, but it will chew up a lot of resources, leading to sluggishness.
⚈ InnoDB has to write the undo information to its transaction logs; this significantly increases the I/O required.
⚈ Replication, being asynchronous, will effectively be delayed (on Slaves) while the DELETE is running.
⚈MyISAM将在整个操作过程中锁定表格，因此表格无法完成任何其他操作。
⚈InnoDB不会锁定表格，但它会占用大量资源，导致迟缓。
⚈InnoDB必须将撤消信息写入其事务日志; 这显着增加了所需的I / O.
⚈在DELETE运行时，异步复制将在（Slaves）上有效延迟。
InnoDB and undo
To be ready for a crash, a transactional engine such as InnoDB will record what it is doing to a log file. To make that somewhat less costly, the log file is sequentially written. If the log files you have (there are usually 2)
fill up because the delete is really big, then the undo information spills into the actual data blocks, leading to even more I/O.
Deleting in chunks avoids some of this excess overhead.
Limited benchmarking of total delete elapsed time shows two observations:
⚈ Total delete time approximately doubles above some 'chunk' size (as opposed to below that threshold). I do not have a formula relating the log file size with the threshold cutoff.
⚈ Chunk size below several hundred rows is slower. This is probably because the overhead of starting/ending each chunk dominates the timing.
Solutions
⚈ PARTITION -- Requires 5.1 and some careful setup, but is excellent for purging a time-base series.
⚈ DELETE in chunks -- Carefully walk through the table N rows at a time.
⚈ 分区 - 需要5.1和一些精心设置，但非常适合清除时基系列。
⚈ 以chunk的形式 删除 - 一次小心地遍历表格N行。
PARTITION
The idea here is to have a sliding window of partitions. Let's say you need to purge news articles after 30 days. The "partition key" would be the datetime (or timestamp) that is to be used for purging, and the PARTITIONs would be BY RANGE. Every night, a cron job would come along and build a new partition for the next day, and drop the oldest partition.
Dropping a partition is essentially instantaneous, much faster than deleting that many rows. However, you must design the table so that the entire partition can be dropped. That is, you cannot have some items in a partition living longer than others.
PARTITION tables have a lot of restrictions, some are rather weird. You can either have no UNIQUE (or PRIMARY) key on the table, or every UNIQUE key must include the partition key. In this use case, the partition key is the datetime. It should not be the first part of the PRIMARY KEY (if you have a PRIMARY KEY).
You can PARTITION InnoDB tables. (Before Version 8.0, you could also partition MyISAM tables.)
Since two news articles could have the same timestamp, you cannot assume the partition key is sufficient for uniqueness of the PRIMARY KEY, so you need to find something else to help with that.
这里的想法是有一个分区的滑动窗口。假设您需要在30天后清除新闻文章。“分区键”将是用于清除的日期时间（或时间戳），PARTITIONs将是BY RANGE。每天晚上，一个cron作业会出现并为第二天构建一个新的分区，并删除最旧的分区。
删除分区基本上是即时的，比删除那么多行要快得多。但是，您必须设计表，以便可以删除整个分区。也就是说，您不能让分区中的某些项目比其他项目更长。
PARTITION表有很多限制，有些是相当奇怪的。您可以在表上没有UNIQUE（或PRIMARY）键，或者每个UNIQUE键都必须包含分区键。在此用例中，分区键是日期时间。它不应该是PRIMARY KEY的第一部分（如果你有一个PRIMARY KEY）。
你可以PARTITION InnoDB表。（在8.0之前，您还可以对MyISAM表进行分区。）
由于两篇新闻文章可能具有相同的时间戳，因此您不能假设分区键足以满足PRIMARY KEY的唯一性，因此您需要找到其他内容来帮助解决这个问题。
分区维护
PARTITIONing的参考实现需要MySQL 5.1。 关于PARTITION的MySQL文档
Reference implementation for Partition maintenance
PARTITIONing requires MySQL 5.1. MySQL docs on PARTITION
Deleting in Chunks
Although the discussion in this section talks about DELETE, it can be used for any other "chunking", such as, say, UPDATE, or SELECT plus some complex processing.
(This discussion applies to both MyISAM and InnoDB.)
When deleting in chunks, be sure to avoid doing a table scan. Also be sure to avoid OFFSET and LIMIT. The code below is good at that; it scans no more than 1001 rows in any one query. (The 1000 is tunable.)
在以块的形式删除时，请务必避免进行表扫描。另外一定要避免OFFSET和LIMIT。下面的代码很擅长; 它在任何一个查询中扫描不超过1001行。（1000是可调的。）
Assuming you have news articles that need to be purged, and you have a schema something like
CREATE TABLE tbl
id INT UNSIGNED NOT NULL AUTO_INCREMENT,
ts TIMESTAMP,
...
PRIMARY KEY(id)
Then, this pseudo-code is a good way to delete the rows older than 30 days:
然后，这个伪代码是删除超过30天的行的好方法
@a = 0
LOOP
DELETE FROM tbl
WHERE id BETWEEN @a AND @a+999
AND ts < DATE_SUB(CURRENT_DATE(), INTERVAL 30 DAY)
SET @a = @a + 1000
sleep 1 -- be a nice guy
UNTIL end of table
Notes (Most of these caveats will be covered later):
⚈ It uses the PK instead of the secondary key. This gives much better locality of disk hits, especially for InnoDB.
⚈ You could (should?) do something to avoid walking through recent days but doing nothing. Caution -- the code for this could be costly.
⚈ The 1000 should be tweaked so that the DELETE usually takes under, say, one second.
⚈ No INDEX on ts is needed. (This helps INSERTs a little.)
⚈ If your PRIMARY KEY is compound, the code gets messier. (a fix is below)
⚈ This code will not work without a numeric PRIMARY or UNIQUE key. (a fix is below)
⚈ Read on, we'll develop messier code to deal with most of these caveats.
注释（大多数警告将在后面介绍）：
⚈它使用PK而不是辅助键。这提供了更好的磁盘命中位置，特别是对于InnoDB。
⚈你可以（应该？）做些什么来避免走近最近几天但什么都不做。注意 - 此代码可能代价高昂。
⚈应该调整1000，以便DELETE通常需要一秒钟。
⚈不需要关于ts的索引。（这有助于INSERTs。）
⚈如果您的PRIMARY KEY是复合的，代码会变得更加混乱。（修复如下）
⚈如果没有数字PRIMARY或UNIQUE键，此代码将无法工作。（修正如下）
⚈继续阅读，我们将开发更复杂的代码来处理大多数这些警告。
If there are big gaps in id values (and there will after the first purge), then
@a = SELECT MIN(id) FROM tbl
LOOP
SELECT @z := id FROM tbl WHERE id >= @a ORDER BY id LIMIT 1000,1
If @z is null
exit LOOP -- last chunk
DELETE FROM tbl
WHERE id >= @a
AND id < @z
AND ts < DATE_SUB(CURRENT_DATE(), INTERVAL 30 DAY)
SET @a = @z
sleep 1 -- be a nice guy, especially in replication
ENDLOOP
# Last chunk:
DELETE FROM tbl
WHERE id >= @a
AND ts < DATE_SUB(CURRENT_DATE(), INTERVAL 30 DAY)
That code works whether id is numeric or character, and it mostly works even if id is not UNIQUE. With a non-unique key, the risk is that you could be caught in a loop whenever @z==@a. That can be detected and fixed thus:
...
SELECT @z := id FROM tbl WHERE id >= @a ORDER BY id LIMIT 1000,1
If @z == @a
SELECT @z := id FROM tbl WHERE id > @a ORDER BY id LIMIT 1
...
The drawback is that there could be more than 1000 items with a single id. In most practical cases, that is unlikely.
If you do not have a primary (or unique) key defined on the table, and you have an INDEX on ts, then consider
LOOP
DELETE FROM tbl
WHERE ts < DATE_SUB(CURRENT_DATE(), INTERVAL 30 DAY)
ORDER BY ts -- to use the index, and to make it deterministic
LIMIT 1000
UNTIL no rows deleted
This technique is NOT recommended because the LIMIT leads to a warning on replication about it being non-deterministic (discussed below).
InnoDB Chunking Recommendation
⚈ Have a 'reasonable' size for innodb_log_file_size.
⚈ Use AUTOCOMMIT=1 for the session doing the deletions.
⚈ Pick about 1000 rows for the chunk size.
⚈ Adjust the row count down if asynchronous replication (Statement Based) causes too much delay on the Slaves or hogs the table too much.
⚈对innodb_log_file_size有一个“合理”的大小。
⚈对执行删除的会话使用AUTOCOMMIT = 1。
⚈为块大小选择大约1000行。
if如果异步复制（基于语句）导致Slaves上的延迟太多或者占用过多的表，则调整行数。
Iterating through a compound key
To perform the chunked deletes recommended above, you need a way to walk through the PRIMARY KEY. This can be difficult if the PK has more than one column in it.
To efficiently to do compound 'greater than':
要执行上面推荐的分块删除，您需要一种方法来遍历PRIMARY KEY。如果PK中有多个列，这可能很困难。
要有效地复合'大于'：
Assume that you left off at ($g, $s) (and have handled that row):
INDEX(Genus, species)
SELECT/DELETE ...
WHERE Genus >= '$g' AND ( species > '$s' OR Genus > '$g' )
ORDER BY Genus, species
LIMIT ...
Addenda: The above AND/OR works well in older versions of MySQL; this works better in newer versions:
WHERE ( Genus = '$g' AND species > '$s' ) OR Genus > '$g' )
A caution about using @variables for strings. If, instead of '$g', you use @g, you need to be careful to make sure that @g has the same CHARACTER SET and COLLATION as Genus, else there could be a charset/collation conversion on the fly that prevents the use of the INDEX. Using the INDEX is vital for performance. It may require a COLLATE clause on SET NAMES and/or the @g in the SELECT.
关于在字符串中使用@variables的注意事项。如果你使用@g代替'$ g'，你需要小心确保@g具有相同的CHARACTER SET和COLLATION作为Genus，否则可能会有动态的charset / collation转换阻止使用INDEX。使用INDEX对性能至关重要。它可能需要SET NAMES上的COLLATE子句和/或SELECT中的@g。
Reclaiming the disk space
Note: Reclaiming disk space may not be necessary. After all, tomorrow's INSERTs will simply reuse the free space in the table.
注意：可能不需要回收磁盘空间。毕竟，明天的INSERT将简单地重用表中的空闲空间。
This is costly. (Switch to the PARTITION solution if practical.)
MyISAM leaves gaps in the table (.MYD file); OPTIMIZE TABLE will reclaim the freed space after a big delete. But it may take a long time and lock the table.
MyISAM在表中留下空白（.MYD文件）; OPTIMIZE TABLE将在大删除后回收释放的空间。但它可能需要很长时间才能锁定表格。
InnoDB is block-structured, organized in a BTree on the PRIMARY KEY. An isolated deleted row leaves a block less full. A lot of deleted rows can lead to coalescing of adjacent blocks. (Blocks are normally 16KB.)
In InnoDB, there is no practical way to reclaim the freed space from ibdata1, other than to reuse the freed blocks eventually.
If you have innodb_file_per_table = 0, the only option is to dump ALL tables, remove ibdata*, restart, and reload. That is rarely worth the effort and time.
InnoDB, even with innodb_file_per_table = 1, won't give space back to the OS, but at least it is only one table to rebuild with. In this case, something like this should work:
CREATE TABLE new LIKE main; INSERT INTO new SELECT * FROM main; -- This could take a long time RENAME TABLE main TO old, new TO main; -- Atomic swap DROP TABLE old; -- Space freed up here
You do need enough disk space for both copies. You must not write to the table during the process.
Deleting more than half a table
The following technique can be used for any combination of
⚈ Deleting a large portion of the table more efficiently
⚈ Add PARTITIONing
⚈ Converting to innodb_file_per_table = ON
⚈ Defragmenting
This can be done by chunking, or (if practical) all at once:
-- Optional: SET GLOBAL innodb_file_per_table = ON;
CREATE TABLE New LIKE Main;
-- Optional: ALTER TABLE New ADD PARTITION BY RANGE ...;
-- Do this INSERT..SELECT all at once, or with chunking:
INSERT INTO New
SELECT * FROM Main
WHERE ...; -- just the rows you want to keep
RENAME TABLE main TO Old, New TO Main;
DROP TABLE Old; -- Space freed up here
Notes:
⚈ You do need enough disk space for both copies.
⚈ You must not write to the table during the process. (Changes to Main may not be reflected in New.)
Non-deterministic Replication 非确定性复制
Any UPDATE, DELETE, etc with LIMIT that is replicated to slaves (via Statement Based Replication) _may_ cause inconsistencies between the Master and Slaves. This is because the actual order of the records discovered for updating/deleting may be different on the slave, thereby leading to a different subset being modified. To be safe, add ORDER BY to such statements. Moreover, be sure the ORDER BY is deterministic -- that is, the fields/expressions in the ORDER BY are unique.
任何带有LIMIT的UPDATE，DELETE等复制到从属（通过基于语句的复制）_may_导致主服务器和从服务器之间的不一致。这是因为在从属设备上发现的用于更新/删除的记录的实际顺序可能不同，从而导致修改不同的子集。为安全起见，请将ORDER BY添加到此类语句中。此外，确保ORDER BY是确定性的 - 也就是说，ORDER BY中的字段/表达式是唯一的。
An example of an ORDER BY that does not quite work: Assume there are multiple rows for each 'date':
DELETE * FROM tbl ORDER BY date LIMIT 111
Given that id is the PRIMARY KEY (or UNIQUE), this will be safe:
DELETE * FROM tbl ORDER BY date, id LIMIT 111
Unfortunately, even with the ORDER BY, MySQL has a deficiency that leads to a bogus warning in mysqld.err. See Spurious "Statement is not safe to log in statement format." warnings
Some of the above code avoids this spurious warning by doing
SELECT @z := ... LIMIT 1000,1; -- not replicated DELETE ... BETWEEN @a AND @z; -- deterministic
That pair of statements guarantees no more than 1000 rows are touched, not the whole table.
Replication and KILL
If you KILL a DELETE (or any? query) on the Master in the middle of its execution, what will be Replicated?
If it is InnoDB, the query should be rolled back. (Exceptions??)
In MyISAM, rows are DELETEd as the statement is executed, and there is no provision for ROLLBACK. Some of the rows will be deleted, some won't. You probably have no clue of how much was deleted. In a single server, simply run the delete again. The delete is put into the binlog, but with error 1317. Since Replication is supposed to keep the Master and Slave in sync, and since it has no clue of how to do that, Replication stops and waits for manual intervention. In a HA (High Available) system using Replication, this is a minor disaster. Meanwhile, you need to go to each Slave(s) and verify that it is stuck for this reason, then do
SET GLOBAL SQL_SLAVE_SKIP_COUNTER = 1; START SLAVE;
Then (presumably) reexecuting the DELETE will finish the aborted task.
(That is yet another reason to move all your tables from MyISAM to InnoDB.)
SBR vs RBR; Galera
"Row Based Replication" implies that the rows to be deleted are written to the binlog. The bigger the rows, and the more rows that you delete in a single "chunk", the more replication will be impacted. The suggestion of "1000" rows per chunks may need to be adjusted. The tradeoff is between how soon all the chunks are finished versus how much impact each chunk has on other things going on in replication.
If the task is to "purge old data", then speed of completion is probably not important.
“基于行的复制”意味着要删除的行将写入binlog。行越大，并且在单个“块”中删除的行越多，将影响的复制越多。可能需要调整每块“1000”行的建议。权衡取决于所有块完成的时间与每个块对复制中其他事件的影响程度。
如果任务是“清除旧数据”，那么完成速度可能并不重要。
Postlog
The tips in this document apply to MySQL, MariaDB, and Percona.
Chunking via Common Schema
Similar - from OAK
Percona's package to do big deletes, etc: pt-archiver
Anecdote: 2 hours vs 5 days
Posted: 2010; Refreshed: June, 2015; Minor Refresh: Sep, 2017
-- Rick James
MySQL Documents by Rick James
HowTo Techniques for Optimizing Tough Tasks:
Partition Maintenance (DROP+REORG) for time series (includes list of PARTITION uses)
Big DELETEs - how to optimize -- and other chunking advice, plus a use for PARTITIONing
Chunking lengthy DELETE/UPDATE/etc.
Data Warehouse techniques:
Overview Summary Tables High speed ingestion
Entity-Attribute-Value -- a common, poorly performing, design pattern (EAV); plus an alternative
Find the nearest 10 pizza parlors -- efficient searching on Latitude + Longitude (another PARITION use)
Lat/Long representation choices
Pagination, not with OFFSET, LIMIT
Techniques on efficiently finding a random row (On beyond ORDER BY RAND())
GUID/UUID Performance (type 1 only)
IP Range Table Performance -- or other disjoint ranges
Rollup Unique User Counts
Alter of a Huge table -- Mostly obviated by 5.6
Latest 10 news articles -- how to optimize the schema and code for such
Build and execute a "Pivot" SELECT (showing rows as columns)
Find largest row for each group ("groupwise max")
Other Tips, Tuning, Debugging, Optimizations, etc...
Rick's RoTs (Rules of Thumb -- lots of tips)
Memory Allocation (caching, etc)
Character Set and Collation problem solver
Trouble with UTF-8 If you want case folding, but accent sensitivity, please file a request at http://bugs.mysql.com .
Python tips, PHP tips, other language tips
utf8 Collations utf8mb4 Collations on 8.0
Converting from MyISAM to InnoDB -- includes differences between them
Compound INDEXes plus other insights into the mysteries of INDEXing
Cookbook for Creating Indexes
Many-to-many mapping table wp_postmeta UNION+OFFSET
MySQL Limits -- built-in hard limits
767-byte INDEX limit
Galera, tips on converting to (Percona XtraDB Cluster, MariaDB 10, or manually installed)
5.7's Query Rewrite -- perhaps 5.7's best perf gain, at least for this forum's users
Request for tuning / slowlog info
Best of MySQL Forum -- index of lots of tips, discussions, etc
Analyze MySQL Performance
Analyze VARIABLEs and GLOBAL STATUS Analyze SlowLog
My slides from conferences
Percona Live 4/2017 - Rick's RoTs (Rules of Thumb) - MySQL/MariaDB
Percona Live 4/2017 - Index Cookbook - MySQL/MariaDB
Percona Live 9/2015 - PARTITIONing - MySQL/MariaDB
(older ones upon request)