操作的是请求号的表,E070,E07T,E070A
添加带表控件的Table Control 在自定义按钮,删除原来的按钮
待补充
*屏幕调用第一次 PBO *屏幕操作 PAI->PBO *下拉列表 VRM_SET_VALUES *下拉列表onchange 给下拉列表添加功能码 *PBO对屏幕参数的改变不能影响屏幕操作对屏幕参数的改变,POB中屏幕参数操作要判断或改到PAI中(依据OK_CODE判断) *焦点设一个全局变量 PAI赋值,PBO设置,清空值 *SET CURSOR FIELD '控件名' LINE 行数 OFFSET 列数. 不是table的LINE后不写 *OK_CODE在PAI后要清空,用OK_SAVE备份,防止滚轮双击等操作再次调用之前的UCOMM *同步数据使用全删除后在全导入
*CXTAB_COLUMN----Table Control的列控制信息结构
*CXTAB_COLUMN-SCREEN-NAME、INPUT、
REPORT ZTEST034. INCLUDE ZTEST034_TOP. INCLUDE ZTEST034_100_PBO. INCLUDE ZTEST034_100_PAI. INCLUDE ZTEST034_FORM. INITIALIZATION. S_TRKORR-SIGN = 'I'. S_TRKORR-OPTION = 'CP'. S_TRKORR-LOW = 'DEV*'. APPEND S_TRKORR. S_AS4USE-SIGN = 'I'. S_AS4USE-OPTION = 'EQ'. S_AS4USE-LOW = SY-UNAME. APPEND S_AS4USE. AT SELECTION-SCREEN OUTPUT. AT SELECTION-SCREEN. START-OF-SELECTION. PERFORM GET_DATA. END-OF-SELECTION. PERFORM ALV_DISPLAY. *&---------------------------------------------------------------------* *& Form GET_DATA *&---------------------------------------------------------------------* * text *----------------------------------------------------------------------* * --> p1 text * <-- p2 text *----------------------------------------------------------------------* FORM GET_DATA . "E070表中请求号包括上下两层请求号,STRKORR为上层请求号 "要查出所有符合条件请求号 SELECT * FROM E070 INTO CORRESPONDING FIELDS OF TABLE gt_trans WHERE ( TRKORR IN S_TRKORR OR STRKORR IN S_TRKORR ) AND TRSTATUS IN S_TRSTAT AND AS4USER IN S_AS4USE. IF gt_trans IS NOT INITIAL. SELECT TRKORR AS4TEXT FROM E07T INTO CORRESPONDING FIELDS OF TABLE GT_E07T FOR ALL ENTRIES IN gt_trans WHERE TRKORR = gt_trans-TRKORR AND LANGU = '1'. SELECT * FROM E070A INTO CORRESPONDING FIELDS OF TABLE GT_E070A1 FOR ALL ENTRIES IN gt_trans WHERE TRKORR = gt_trans-TRKORR. ENDIF. GT_E070A2[] = GT_E070A[]. ENDFORM. " GET_DATA *&---------------------------------------------------------------------* *& Form ALV_DISPLAY *&---------------------------------------------------------------------* * text *----------------------------------------------------------------------* * --> p1 text * <-- p2 text *----------------------------------------------------------------------* FORM ALV_DISPLAY . PERFORM BUILD_FIELDCAT. PERFORM DEAL_DATA. PERFORM ALV_GRID. ENDFORM. " ALV_DISPLAY *&---------------------------------------------------------------------* *& Form DEAL_DATA *&---------------------------------------------------------------------* * text *----------------------------------------------------------------------* * --> p1 text * <-- p2 text *----------------------------------------------------------------------* FORM DEAL_DATA . LOOP AT GT_TRANS INTO GW_TRANS. IF GW_TRANS-TRSTATUS = 'D'. GW_TRANS-TRSTATUS_TX = '可修改的'. ELSEIF GW_TRANS-TRSTATUS = 'L'. GW_TRANS-TRSTATUS_TX = '可修改,受保护'. ELSEIF GW_TRANS-TRSTATUS = 'O'. GW_TRANS-TRSTATUS_TX = '已开始释放'. ELSEIF GW_TRANS-TRSTATUS = 'R'. GW_TRANS-TRSTATUS_TX = '已释放'. ELSEIF GW_TRANS-TRSTATUS = 'N'. GW_TRANS-TRSTATUS_TX = '已释放(含对已修复对象的导入保护)'. ENDIF. READ TABLE GT_E07T WITH KEY TRKORR = gw_trans-TRKORR. IF SY-SUBRC = 0. GW_TRANS-AS4TEXT = GT_E07T-AS4TEXT. ENDIF. MODIFY GT_TRANS FROM GW_TRANS. CLEAR: GW_TRANS,GT_E07T. ENDLOOP. ENDFORM. " DEAL_DATA *&---------------------------------------------------------------------* *& Form BUILD_FIELDCAT *&---------------------------------------------------------------------* * text *----------------------------------------------------------------------* * --> p1 text * <-- p2 text *----------------------------------------------------------------------* FORM BUILD_FIELDCAT . DEFINE %%FIELD. CLEAR:GW_FIELDCAT. GW_FIELDCAT-FIELDNAME = &1. GW_FIELDCAT-COLTEXT = &2. APPEND GW_FIELDCAT TO GT_FIELDCAT. END-OF-DEFINITION. %%FIELD 'TRKORR' '请求' . %%FIELD 'TRFUNCTION' '请求类型' . %%FIELD 'TRSTATUS_TX' '状态' . %%FIELD 'TARSYSTEM' '目标系统' . %%FIELD 'KORRDEV' '类别' . %%FIELD 'AS4USER' '所有者' . %%FIELD 'AS4DATE' '上次更改日期' . %%FIELD 'AS4TIME' '上次更改时间' . %%FIELD 'STRKORR' '高级别请求' . %%FIELD 'AS4TEXT' '请求描述' . %%FIELD 'RESULT' '结果' . ENDFORM. " BUILD_FIELDCAT *&---------------------------------------------------------------------* *& Form ALV_GRID *&---------------------------------------------------------------------* * text *----------------------------------------------------------------------* * --> p1 text * <-- p2 text *----------------------------------------------------------------------* FORM ALV_GRID . GW_LAYOUT-ZEBRA = 'X'. GW_LAYOUT-CWIDTH_OPT = 'X'. GW_LAYOUT-SEL_MODE = 'D'. GW_LAYOUT-BOX_FNAME = 'MARK'. CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC' EXPORTING I_CALLBACK_PROGRAM = SY-REPID I_CALLBACK_PF_STATUS_SET = 'GC_PF_STATUS' I_CALLBACK_USER_COMMAND = 'USER_COMMAND' IS_LAYOUT_LVC = GW_LAYOUT IT_FIELDCAT_LVC = GT_FIELDCAT * I_DEFAULT = 'X' I_SAVE = 'A' TABLES T_OUTTAB = GT_TRANS[] * EXCEPTIONS * PROGRAM_ERROR = 1 * OTHERS = 2 . IF SY-SUBRC <> 0. * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4. ENDIF. ENDFORM. " ALV_GRID *&---------------------------------------------------------------------* *& Form GC_PF_STATUS *&---------------------------------------------------------------------* * text *----------------------------------------------------------------------* * --> p1 text * <-- p2 text *----------------------------------------------------------------------* FORM GC_PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB. * 设置标题栏 SET TITLEBAR 'TITAL001'. SET PF-STATUS 'STATUS001' EXCLUDING RT_EXTAB. ENDFORM. "GC_PF_STATUS *&---------------------------------------------------------------------* *& Form USER_COMMAND *&---------------------------------------------------------------------* * text *----------------------------------------------------------------------* * --> p1 text * <-- p2 text *----------------------------------------------------------------------* FORM USER_COMMAND USING P_UCOMM LIKE SY-UCOMM P_SELFIELD TYPE SLIS_SELFIELD. P_SELFIELD-REFRESH = 'X'."自动刷新 CASE P_UCOMM. * WHEN '&F03'. * LEAVE TO SCREEN 0. * WHEN '&F15' OR '&F12'. * LEAVE PROGRAM. WHEN 'UPDATE'."R->D LOOP AT GT_TRANS INTO GW_TRANS WHERE MARK = 'X' AND TRSTATUS = 'R'. UPDATE E070 SET TRSTATUS = 'D' WHERE TRKORR = GW_TRANS-TRKORR. IF SY-SUBRC = 0. COMMIT WORK . GW_TRANS-TRSTATUS = 'D'. GW_TRANS-TRSTATUS_TX = '可修改'. GW_TRANS-RESULT = '修改成功'. ENDIF. MODIFY GT_TRANS FROM GW_TRANS. CLEAR: GW_TRANS. ENDLOOP. WHEN 'UPDATE2'."D->R LOOP AT GT_TRANS INTO GW_TRANS WHERE MARK = 'X' AND TRSTATUS = 'D' AND TRFUNCTION = 'K'. READ TABLE GT_E070A1 INTO GW_E070A WITH KEY TRKORR = gw_trans-TRKORR ATTRIBUTE = 'EXPTIMESTAMP'. "E070A属性只对类型为K的请求号存在,所以根据上层判断 IF SY-SUBRC = 0. UPDATE E070 SET TRSTATUS = 'R' WHERE ( TRKORR = GW_TRANS-TRKORR OR STRKORR = GW_TRANS-TRKORR )."修改库表 IF SY-SUBRC = 0. COMMIT WORK . GW_TRANS-TRSTATUS = 'R'. GW_TRANS-TRSTATUS_TX = '已释放'. GW_TRANS-RESULT = '修改成功'. ENDIF. MODIFY GT_TRANS FROM GW_TRANS. "修改ALV内表中的下层请求号,方便展示 MODIFY GT_TRANS FROM GW_TRANS TRANSPORTING TRSTATUS TRSTATUS_TX RESULT WHERE STRKORR = GW_TRANS-TRKORR. ELSE. GW_TRANS-RESULT = '属性EXPTIMESTAMP不存在,请手动释放'. ENDIF. CLEAR: GW_TRANS. ENDLOOP. WHEN 'ATTRI'."显示修改请求号的属性,DIALOG练习 LOOP AT GT_TRANS INTO GW_TRANS WHERE MARK = 'X' AND TRSTATUS = 'D' AND TRFUNCTION = 'K'. LOOP AT GT_E070A1 INTO GW_E070A WHERE TRKORR = gw_trans-TRKORR. APPEND GW_E070A TO GT_E070A. CLEAR:GW_E070A. ENDLOOP. CLEAR:GW_TRANS. ENDLOOP. GT_E070A2[] = GT_E070A[]. READ TABLE GT_TRANS INTO GW_TRANS WITH KEY MARK = 'X' TRSTATUS = 'D' TRFUNCTION = 'K'. IF SY-SUBRC = 0. CALL SCREEN 0100. ELSE. MESSAGE '请选择一行类型为K、状态可修改的数据!!!' TYPE 'I'. ENDIF. ENDCASE. ENDFORM. "USER_COMMAND *&---------------------------------------------------------------------* *& Form TABLE_E070A_MODIFY *&---------------------------------------------------------------------* * text *----------------------------------------------------------------------* * --> p1 text * <-- p2 text *----------------------------------------------------------------------* FORM TABLE_E070A_MODIFY . DATA: lcx_error TYPE REF TO cx_root, "cx_sy_sql_error . "cx_sy_open_sql_db."异常 lcx_error2 TYPE REF TO cx_root," err_text TYPE c LENGTH 1000. DATA: L_ANSWER, L_NUM TYPE I. DATA: LT_E070A LIKE E070A OCCURS 0, LW_E070A LIKE LINE OF LT_E070A. * TRY."想利用哈希表关键字段不能重复来判断内表有重复数据,哈希表数据重复异常直接爆红,catch不到 * GT_E070A_HASH[] = GT_E070A[]. * CATCH cx_root INTO lcx_error2. * err_text = lcx_error->IF_MESSAGE~GET_TEXT( ). * MESSAGE err_text TYPE 'E'. * ENDTRY. "保存前弹出提示消息 CALL FUNCTION 'POPUP_TO_CONFIRM_STEP' EXPORTING TEXTLINE1 = TEXT-T01 TITEL = TEXT-T02 IMPORTING ANSWER = L_ANSWER. CHECK L_ANSWER = 'J'. LOOP AT GT_E070A INTO GW_E070A."GT_E070A多了一个line字段 LW_E070A-TRKORR = GW_E070A-TRKORR. LW_E070A-POS = GW_E070A-POS. LW_E070A-ATTRIBUTE = GW_E070A-ATTRIBUTE. LW_E070A-REFERENCE = GW_E070A-REFERENCE. APPEND LW_E070A TO LT_E070A. CLEAR:LW_E070A,GW_E070A. ENDLOOP. "检查主键重复 SORT GT_E070A BY TRKORR POS. LOOP AT LT_E070A INTO LW_E070A. AT NEW POS. L_NUM = 0. ENDAT. L_NUM = L_NUM + 1. IF L_NUM >= 2. MESSAGE '存在主键重复内容!!!' TYPE 'E'. ENDIF. ENDLOOP. TRY. DELETE FROM E070A WHERE TRKORR = E070-TRKORR. MODIFY E070A FROM TABLE LT_E070A. CATCH cx_sy_open_sql_db INTO lcx_error. err_text = lcx_error->IF_MESSAGE~GET_TEXT( ). SY-SUBRC = 4. ENDTRY. IF SY-SUBRC <> 0. ROLLBACK WORK. MESSAGE err_text TYPE 'E'. ELSE. COMMIT WORK. MESSAGE '同步成功!!!' TYPE 'S'. ENDIF. ENDFORM. " TABLE_E070A_MODIFY *&---------------------------------------------------------------------* *& Form LIST_TABLE_MODIFY *&---------------------------------------------------------------------* * text *----------------------------------------------------------------------* * --> p1 text * <-- p2 text *----------------------------------------------------------------------* FORM LIST_TABLE_MODIFY . CLEAR: GT_E070A[]."清空GT_E070A[],利用GT_E070A2[]只把下拉框中请求号的属性传入GT_E070A[] READ TABLE GT_TRANS INTO GW_TRANS WITH KEY TRKORR = E070-TRKORR. E070-TRKORR = GW_TRANS-TRKORR. E070-TRSTATUS = GW_TRANS-TRSTATUS. MAKT-MAKTX = GW_TRANS-TRSTATUS_TX. E070-AS4USER = GW_TRANS-AS4USER. E07T-AS4TEXT = GW_TRANS-AS4TEXT. LOOP AT GT_E070A2 INTO GW_E070A WHERE TRKORR = E070-TRKORR. APPEND GW_E070A TO GT_E070A. CLEAR:GW_E070A. ENDLOOP. CLEAR GW_TRANS. ENDFORM. " LIST_TABLE_MODIFY
include
*&---------------------------------------------------------------------* *& 包括 ZTEST034_TOP *&---------------------------------------------------------------------* TYPE-POOLS:SLIS,vrm. TABLES:E070,E070A,E07T,MAKT. DATA: GW_LAYOUT TYPE LVC_S_LAYO, GW_FIELDCAT TYPE LVC_S_FCAT, GT_FIELDCAT TYPE LVC_T_FCAT. TYPES:BEGIN OF gy_trans, MARK(1), TRKORR TYPE TRKORR, "请求/任务 TRFUNCTION TYPE TRFUNCTION, "请求/任务的类型 TRSTATUS TYPE TRSTATUS, "请求/任务状态 TRSTATUS_tx(20), TARSYSTEM TYPE TR_TARGET, "请求的传输目标 KORRDEV TYPE TRCATEG, "请求或任务类型 AS4USER TYPE TR_AS4USER, "请求或任务的所有者 AS4DATE TYPE AS4DATE, "最后更改的日期 AS4TIME TYPE AS4TIME, "上次更改时间 STRKORR TYPE STRKORR, "高级别请求 AS4TEXT TYPE AS4TEXT, "资源库对象的简短描述 RESULT(100), END OF gy_trans. TYPES:BEGIN OF GY_E070A , LINE TYPE CHAR1, TRKORR TYPE TRKORR, POS TYPE DDPOSITION, ATTRIBUTE TYPE TRATTR, REFERENCE TYPE TRVALUE, END OF GY_E070A. DATA: gw_trans TYPE gy_trans, gt_trans TYPE gy_trans OCCURS 0. DATA: GT_E070A TYPE GY_E070A OCCURS 0 , GT_E070A1 TYPE GY_E070A OCCURS 0 , GT_E070A2 TYPE GY_E070A OCCURS 0 , GT_E070A_HASH TYPE HASHED TABLE OF GY_E070A WITH UNIQUE KEY TRKORR POS, GW_E070A TYPE GY_E070A. DATA: BEGIN OF GT_E07T OCCURS 0, TRKORR TYPE TRKORR, AS4TEXT TYPE AS4TEXT, END OF GT_E07T. SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001. SELECT-OPTIONS: S_TRKORR FOR E070-TRKORR, S_TRSTAT FOR E070-TRSTATUS, S_AS4USE FOR E070-AS4USER. SELECTION-SCREEN END OF BLOCK b1. *&SPWIZARD: DECLARATION OF TABLECONTROL 'Z34_E070A' ITSELF CONTROLS: Z34_E070A TYPE TABLEVIEW USING SCREEN 0100. DATA: GS_COLS TYPE CXTAB_COLUMN."Table Control的列控制信息结构 *&SPWIZARD: LINES OF TABLECONTROL 'Z34_E070A' DATA: G_Z34_E070A_LINES LIKE SY-LOOPC. DATA: OK_CODE LIKE SY-UCOMM,"屏幕功能码 OK_SAVE LIKE SY-UCOMM."屏幕功能码备份 DATA: G_LINE TYPE I,"全局焦点,PAI赋值,PBO使用设定焦点,PBO最后清空 G_GUISTATUE(50)."显示修改按钮
*&---------------------------------------------------------------------* *& 包括 ZTEST034_PBO *&---------------------------------------------------------------------* *&---------------------------------------------------------------------* *& Module STATUS_0100 OUTPUT *&---------------------------------------------------------------------* * text *----------------------------------------------------------------------* MODULE STATUS_0100 OUTPUT. "修改gui按钮是否显示 DATA: FCODE LIKE SY-UCOMM OCCURS 0 WITH HEADER LINE. IF G_GUISTATUE = 'DISPLAY' OR G_GUISTATUE IS INITIAL. APPEND 'INSR' TO FCODE. APPEND 'DELE' TO FCODE. SET PF-STATUS 'STATUS002' EXCLUDING FCODE. ELSEIF G_GUISTATUE = 'EDIT'. SET PF-STATUS 'STATUS002'. ENDIF. SET TITLEBAR 'TITAL002'. ENDMODULE. " STATUS_0100 OUTPUT *&---------------------------------------------------------------------* *& Module SET_DIS_EDIT OUTPUT *&---------------------------------------------------------------------* * text *----------------------------------------------------------------------* MODULE SET_DIS_EDIT OUTPUT. "TC字段输入输出切换 "隐藏某列用字段长度 vislength = 0 设置, IF G_GUISTATUE = 'DISPLAY'. LOOP AT Z34_E070A-COLS INTO GS_COLS. IF GS_COLS-SCREEN-NAME = 'GW_E070A-TRKORR' OR GS_COLS-SCREEN-NAME = 'GW_E070A-POS' OR GS_COLS-SCREEN-NAME = 'GW_E070A-ATTRIBUTE' OR GS_COLS-SCREEN-NAME = 'GW_E070A-REFERENCE'. GS_COLS-SCREEN-INPUT = '0'. ENDIF. MODIFY Z34_E070A-COLS FROM GS_COLS. ENDLOOP. ELSEIF G_GUISTATUE = 'EDIT'. LOOP AT Z34_E070A-COLS INTO GS_COLS. IF GS_COLS-SCREEN-NAME = 'GW_E070A-TRKORR' OR GS_COLS-SCREEN-NAME = 'GW_E070A-POS' OR GS_COLS-SCREEN-NAME = 'GW_E070A-ATTRIBUTE' OR GS_COLS-SCREEN-NAME = 'GW_E070A-REFERENCE'. GS_COLS-SCREEN-INPUT = '1'."可输入 IF GS_COLS-SCREEN-NAME = 'GW_E070A-TRKORR' OR GS_COLS-SCREEN-NAME = 'GW_E070A-POS'. GS_COLS-SCREEN-REQUIRED = '1'."必输 ENDIF. ENDIF. MODIFY Z34_E070A-COLS FROM GS_COLS. ENDLOOP. ENDIF. ENDMODULE. " SET_DIS_EDIT OUTPUT *&---------------------------------------------------------------------* *& Module SET_HEADER OUTPUT *&---------------------------------------------------------------------* * text *----------------------------------------------------------------------* MODULE SET_HEADER OUTPUT. DATA: L_FIELD TYPE VRM_ID, LT_VALUES TYPE VRM_VALUES, LW_VALUE LIKE LINE OF LT_VALUES. DATA: LINE TYPE I. IF LT_VALUES IS INITIAL. CLEAR: GT_E070A[]."清空GT_E070A[],利用GT_E070A2[]只把下拉框中请求号的属性传入GT_E070A[] LINE = 1. LOOP AT GT_TRANS INTO GW_TRANS WHERE MARK = 'X' AND TRSTATUS = 'D' AND TRFUNCTION = 'K'. IF LINE = 1."初始值 E070-TRKORR = GW_TRANS-TRKORR. E070-TRSTATUS = GW_TRANS-TRSTATUS. MAKT-MAKTX = GW_TRANS-TRSTATUS_tx."描述字段,名字随便起的 E070-AS4USER = GW_TRANS-AS4USER. E07T-AS4TEXT = GW_TRANS-AS4TEXT. LOOP AT GT_E070A2 INTO GW_E070A WHERE TRKORR = E070-TRKORR. APPEND GW_E070A TO GT_E070A. CLEAR:GW_E070A. ENDLOOP. ENDIF. LW_VALUE-KEY = GW_TRANS-TRKORR. LW_VALUE-TEXT = GW_TRANS-TRKORR. APPEND LW_VALUE TO LT_VALUES. CLEAR:GW_TRANS,LW_VALUE. LINE = LINE + 1. ENDLOOP. CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = 'E070-TRKORR' VALUES = LT_VALUES. ENDIF. ENDMODULE. " SET_HEADER OUTPUT *&SPWIZARD: OUTPUT MODULE FOR TC 'Z34_E070A'. DO NOT CHANGE THIS LINE! *&SPWIZARD: UPDATE LINES FOR EQUIVALENT SCROLLBAR MODULE Z34_E070A_CHANGE_TC_ATTR OUTPUT. DESCRIBE TABLE GT_E070A LINES Z34_E070A-lines. ENDMODULE. "Z34_E070A_CHANGE_TC_ATTR OUTPUT *&SPWIZARD: OUTPUT MODULE FOR TC 'Z34_E070A'. DO NOT CHANGE THIS LINE! *&SPWIZARD: GET LINES OF TABLECONTROL MODULE Z34_E070A_GET_LINES OUTPUT. G_Z34_E070A_LINES = SY-LOOPC. ENDMODULE. "Z34_E070A_GET_LINES OUTPUT *&---------------------------------------------------------------------* *& Module SET_CURSOR OUTPUT *&---------------------------------------------------------------------* * text *----------------------------------------------------------------------* MODULE SET_CURSOR OUTPUT. "设置焦点 SET CURSOR FIELD 'GW_E070A-TRKORR' LINE G_LINE. CLEAR:G_LINE. ENDMODULE. " SET_CURSOR OUTPUT
*&---------------------------------------------------------------------* *& 包括 ZTEST034_PAI *&---------------------------------------------------------------------* *&SPWIZARD: INPUT MODULE FOR TC 'Z34_E070A'. DO NOT CHANGE THIS LINE! *&SPWIZARD: MODIFY TABLE MODULE Z34_E070A_MODIFY INPUT. IF GW_E070A-ATTRIBUTE = 'EXPTIMESTAMP' . MESSAGE '未释放请求号添加EXPTIMESTAMP属性后将无法释放' TYPE 'W'. ENDIF. MODIFY GT_E070A FROM GW_E070A INDEX Z34_E070A-CURRENT_LINE. "添加到属性的总表里,保持数据一致 APPEND GW_E070A TO GT_E070A2. ENDMODULE. *&SPWIZARD: INPUT MODUL FOR TC 'Z34_E070A'. DO NOT CHANGE THIS LINE! *&SPWIZARD: MARK TABLE MODULE Z34_E070A_MARK INPUT. DATA: g_Z34_E070A_wa2 like line of GT_E070A. if Z34_E070A-line_sel_mode = 1 and GW_E070A-LINE = 'X'. loop at GT_E070A into g_Z34_E070A_wa2 where LINE = 'X'. g_Z34_E070A_wa2-LINE = ''. modify GT_E070A from g_Z34_E070A_wa2 transporting LINE. endloop. endif. MODIFY GT_E070A FROM GW_E070A INDEX Z34_E070A-CURRENT_LINE TRANSPORTING LINE. ENDMODULE. *&SPWIZARD: INPUT MODULE FOR TC 'Z34_E070A'. DO NOT CHANGE THIS LINE! *&SPWIZARD: PROCESS USER COMMAND MODULE Z34_E070A_USER_COMMAND INPUT. * OK_CODE = SY-UCOMM. OK_SAVE = OK_CODE. PERFORM USER_OK_TC USING 'Z34_E070A' 'GT_E070A' 'LINE' CHANGING OK_CODE. * SY-UCOMM = OK_CODE. CLEAR:OK_CODE. ENDMODULE.
*&---------------------------------------------------------------------* *& 包括 ZTEST034_FORM *&---------------------------------------------------------------------* *----------------------------------------------------------------------* * INCLUDE TABLECONTROL_FORMS * *----------------------------------------------------------------------* *&---------------------------------------------------------------------* *& Form USER_OK_TC * *&---------------------------------------------------------------------* FORM USER_OK_TC USING P_TC_NAME TYPE DYNFNAM P_TABLE_NAME P_MARK_NAME CHANGING P_OK LIKE SY-UCOMM. *&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------* DATA: L_OK TYPE SY-UCOMM, L_OFFSET TYPE I. *&SPWIZARD: END OF LOCAL DATA------------------------------------------* *&SPWIZARD: Table control specific operations * *&SPWIZARD: evaluate TC name and operations * * SEARCH P_OK FOR P_TC_NAME. * IF SY-SUBRC <> 0. * EXIT. * ENDIF. * L_OFFSET = STRLEN( P_TC_NAME ) + 1. * L_OK = P_OK+L_OFFSET. *&SPWIZARD: execute general and TC specific operations * CASE P_OK. WHEN 'BACK'. LEAVE TO SCREEN 0. WHEN 'CANCLE' OR 'EXIT'. LEAVE PROGRAM. WHEN 'ANZG'. PERFORM DIS_EDIT. WHEN 'INSR'. "insert row PERFORM FCODE_INSERT_ROW USING P_TC_NAME P_TABLE_NAME. CLEAR P_OK. WHEN 'DELE'. "delete row PERFORM FCODE_DELETE_ROW USING P_TC_NAME P_TABLE_NAME P_MARK_NAME. CLEAR P_OK. WHEN 'P--' OR "top of list 'P-' OR "previous page 'P+' OR "next page 'P++'. "bottom of list PERFORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME L_OK. CLEAR P_OK. * WHEN 'L--'. "total left * PERFORM FCODE_TOTAL_LEFT USING P_TC_NAME. * * WHEN 'L-'. "column left * PERFORM FCODE_COLUMN_LEFT USING P_TC_NAME. * * WHEN 'R+'. "column right * PERFORM FCODE_COLUMN_RIGHT USING P_TC_NAME. * * WHEN 'R++'. "total right * PERFORM FCODE_TOTAL_RIGHT USING P_TC_NAME. * WHEN 'MARK'. "mark all filled lines PERFORM FCODE_TC_MARK_LINES USING P_TC_NAME P_TABLE_NAME P_MARK_NAME . CLEAR P_OK. WHEN 'DMRK'. "demark all filled lines PERFORM FCODE_TC_DEMARK_LINES USING P_TC_NAME P_TABLE_NAME P_MARK_NAME . WHEN 'SAVE'. PERFORM TABLE_E070A_MODIFY. WHEN 'ZLIST001'. PERFORM LIST_TABLE_MODIFY. CLEAR P_OK. * WHEN 'SASCEND' OR * 'SDESCEND'. "sort column * PERFORM FCODE_SORT_TC USING P_TC_NAME * l_ok. ENDCASE. ENDFORM. " USER_OK_TC *&---------------------------------------------------------------------* *& Form FCODE_INSERT_ROW * *&---------------------------------------------------------------------* FORM fcode_insert_row USING P_TC_NAME TYPE DYNFNAM P_TABLE_NAME . *&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------* DATA L_LINES_NAME LIKE FELD-NAME. DATA L_SELLINE LIKE SY-STEPL. DATA L_LASTLINE TYPE I. DATA L_LINE TYPE I. DATA L_TABLE_NAME LIKE FELD-NAME. FIELD-SYMBOLS <TC> TYPE CXTAB_CONTROL. FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE. FIELD-SYMBOLS <LINES> TYPE I. *&SPWIZARD: END OF LOCAL DATA------------------------------------------* ASSIGN (P_TC_NAME) TO <TC>. *&SPWIZARD: get the table, which belongs to the tc * CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline *&SPWIZARD: get looplines of TableControl * CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_LINES_NAME. ASSIGN (L_LINES_NAME) TO <LINES>. *&SPWIZARD: get current line * GET CURSOR LINE L_SELLINE. IF SY-SUBRC <> 0. " append line to table L_SELLINE = <TC>-LINES + 1. *&SPWIZARD: set top line * IF L_SELLINE > <LINES>. <TC>-TOP_LINE = L_SELLINE - <LINES> + 1 . ELSE. <TC>-TOP_LINE = 1. ENDIF. ELSE. " insert line into table L_SELLINE = <TC>-TOP_LINE + L_SELLINE - 1. L_LASTLINE = <TC>-TOP_LINE + <LINES> - 1. ENDIF. *&SPWIZARD: set new cursor line * L_LINE = L_SELLINE - <TC>-TOP_LINE + 1. *&SPWIZARD: insert initial line * INSERT INITIAL LINE INTO <TABLE> INDEX L_SELLINE. <TC>-LINES = <TC>-LINES + 1. *&SPWIZARD: set cursor * SET CURSOR LINE L_LINE. "赋值全局焦点 G_LINE = L_LINE. ENDFORM. " FCODE_INSERT_ROW *&---------------------------------------------------------------------* *& Form FCODE_DELETE_ROW * *&---------------------------------------------------------------------* FORM fcode_delete_row USING P_TC_NAME TYPE DYNFNAM P_TABLE_NAME P_MARK_NAME . *&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------* DATA L_TABLE_NAME LIKE FELD-NAME. FIELD-SYMBOLS <TC> TYPE cxtab_control. FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE. FIELD-SYMBOLS <WA>. FIELD-SYMBOLS:<MARK_FIELD>,<FIELD1>,<FIELD2>,<FIELD3>,<FIELD4>. *&SPWIZARD: END OF LOCAL DATA------------------------------------------* ASSIGN (P_TC_NAME) TO <TC>. *&SPWIZARD: get the table, which belongs to the tc * CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline *&SPWIZARD: delete marked lines * DESCRIBE TABLE <TABLE> LINES <TC>-LINES. LOOP AT <TABLE> ASSIGNING <WA>. *&SPWIZARD: access to the component 'FLAG' of the table header * ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>. IF <MARK_FIELD> = 'X'. "删除到属性的总表里,保持数据一致,再单个请求号属性表的操作之前 ASSIGN COMPONENT 'TRKORR' OF STRUCTURE <WA> TO <FIELD1>. ASSIGN COMPONENT 'POS' OF STRUCTURE <WA> TO <FIELD2>. ASSIGN COMPONENT 'ATTRIBUTE' OF STRUCTURE <WA> TO <FIELD3>. ASSIGN COMPONENT 'REFERENCE' OF STRUCTURE <WA> TO <FIELD4>. DELETE GT_E070A2 WHERE TRKORR = <FIELD1> AND POS = <FIELD2> AND ATTRIBUTE = <FIELD3> AND REFERENCE = <FIELD4>. "单个请求号属性表的操作 DELETE <TABLE> INDEX SYST-TABIX. IF SY-SUBRC = 0. <TC>-LINES = <TC>-LINES - 1. ENDIF. ENDIF. ENDLOOP. "删除完成后,从第一行继续 G_LINE = 1. ENDFORM. " FCODE_DELETE_ROW *&---------------------------------------------------------------------* *& Form COMPUTE_SCROLLING_IN_TC *&---------------------------------------------------------------------* * text *----------------------------------------------------------------------* * -->P_TC_NAME name of tablecontrol * -->P_OK ok code *----------------------------------------------------------------------* FORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME P_OK. *&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------* DATA L_TC_NEW_TOP_LINE TYPE I. DATA L_TC_NAME LIKE FELD-NAME. DATA L_TC_LINES_NAME LIKE FELD-NAME. DATA L_TC_FIELD_NAME LIKE FELD-NAME. FIELD-SYMBOLS <TC> TYPE cxtab_control. FIELD-SYMBOLS <LINES> TYPE I. *&SPWIZARD: END OF LOCAL DATA------------------------------------------* ASSIGN (P_TC_NAME) TO <TC>. *&SPWIZARD: get looplines of TableControl * CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_TC_LINES_NAME. ASSIGN (L_TC_LINES_NAME) TO <LINES>. *&SPWIZARD: is no line filled? * IF <TC>-LINES = 0. *&SPWIZARD: yes, ... * L_TC_NEW_TOP_LINE = 1. ELSE. *&SPWIZARD: no, ... * CALL FUNCTION 'SCROLLING_IN_TABLE' EXPORTING ENTRY_ACT = <TC>-TOP_LINE ENTRY_FROM = 1 ENTRY_TO = <TC>-LINES LAST_PAGE_FULL = 'X' LOOPS = <LINES> OK_CODE = P_OK OVERLAPPING = 'X' IMPORTING ENTRY_NEW = L_TC_NEW_TOP_LINE EXCEPTIONS * NO_ENTRY_OR_PAGE_ACT = 01 * NO_ENTRY_TO = 02 * NO_OK_CODE_OR_PAGE_GO = 03 OTHERS = 0. ENDIF. *&SPWIZARD: get actual tc and column * GET CURSOR FIELD L_TC_FIELD_NAME AREA L_TC_NAME. IF SYST-SUBRC = 0. IF L_TC_NAME = P_TC_NAME. *&SPWIZARD: et actual column * SET CURSOR FIELD L_TC_FIELD_NAME LINE 1. ENDIF. ENDIF. *&SPWIZARD: set the new top line * <TC>-TOP_LINE = L_TC_NEW_TOP_LINE. ENDFORM. " COMPUTE_SCROLLING_IN_TC *&---------------------------------------------------------------------* *& Form FCODE_TC_MARK_LINES *&---------------------------------------------------------------------* * marks all TableControl lines *----------------------------------------------------------------------* * -->P_TC_NAME name of tablecontrol *----------------------------------------------------------------------* FORM FCODE_TC_MARK_LINES USING P_TC_NAME P_TABLE_NAME P_MARK_NAME. *&SPWIZARD: EGIN OF LOCAL DATA-----------------------------------------* DATA L_TABLE_NAME LIKE FELD-NAME. FIELD-SYMBOLS <TC> TYPE cxtab_control. FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE. FIELD-SYMBOLS <WA>. FIELD-SYMBOLS <MARK_FIELD>. *&SPWIZARD: END OF LOCAL DATA------------------------------------------* ASSIGN (P_TC_NAME) TO <TC>. *&SPWIZARD: get the table, which belongs to the tc * CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline *&SPWIZARD: mark all filled lines * LOOP AT <TABLE> ASSIGNING <WA>. *&SPWIZARD: access to the component 'FLAG' of the table header * ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>. <MARK_FIELD> = 'X'. ENDLOOP. ENDFORM. "fcode_tc_mark_lines *&---------------------------------------------------------------------* *& Form FCODE_TC_DEMARK_LINES *&---------------------------------------------------------------------* * demarks all TableControl lines *----------------------------------------------------------------------* * -->P_TC_NAME name of tablecontrol *----------------------------------------------------------------------* FORM FCODE_TC_DEMARK_LINES USING P_TC_NAME P_TABLE_NAME P_MARK_NAME . *&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------* DATA L_TABLE_NAME LIKE FELD-NAME. FIELD-SYMBOLS <TC> TYPE cxtab_control. FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE. FIELD-SYMBOLS <WA>. FIELD-SYMBOLS <MARK_FIELD>. *&SPWIZARD: END OF LOCAL DATA------------------------------------------* ASSIGN (P_TC_NAME) TO <TC>. *&SPWIZARD: get the table, which belongs to the tc * CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline *&SPWIZARD: demark all filled lines * LOOP AT <TABLE> ASSIGNING <WA>. *&SPWIZARD: access to the component 'FLAG' of the table header * ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>. <MARK_FIELD> = SPACE. ENDLOOP. ENDFORM. "fcode_tc_mark_lines *&---------------------------------------------------------------------* *& Form DIS_EDIT *&---------------------------------------------------------------------* * text 编辑与显示的切换 *----------------------------------------------------------------------* * --> p1 text * <-- p2 text *----------------------------------------------------------------------* FORM DIS_EDIT . IF G_GUISTATUE IS INITIAL OR G_GUISTATUE = 'DISPLAY'. G_GUISTATUE = 'EDIT'. ELSEIF G_GUISTATUE = 'EDIT'. G_GUISTATUE = 'DISPLAY'. ENDIF. ENDFORM. " DIS_EDIT