• Codeforces 711c 简单dp


    C. Coloring Trees
    time limit per test
    2 seconds
    memory limit per test
    256 megabytes
    input
    standard input
    output
    standard output

    ZS the Coder and Chris the Baboon has arrived at Udayland! They walked in the park where n trees grow. They decided to be naughty and color the trees in the park. The trees are numbered with integers from 1 to n from left to right.

    Initially, tree i has color ci. ZS the Coder and Chris the Baboon recognizes only m different colors, so 0 ≤ ci ≤ m, where ci = 0 means that tree i is uncolored.

    ZS the Coder and Chris the Baboon decides to color only the uncolored trees, i.e. the trees with ci = 0. They can color each of them them in any of the m colors from 1 to m. Coloring the i-th tree with color j requires exactly pi, j litres of paint.

    The two friends define the beauty of a coloring of the trees as the minimum number of contiguous groups (each group contains some subsegment of trees) you can split all the n trees into so that each group contains trees of the same color. For example, if the colors of the trees from left to right are 2, 1, 1, 1, 3, 2, 2, 3, 1, 3, the beauty of the coloring is 7, since we can partition the trees into 7 contiguous groups of the same color : {2}, {1, 1, 1}, {3}, {2, 2}, {3}, {1}, {3}.

    ZS the Coder and Chris the Baboon wants to color all uncolored trees so that the beauty of the coloring is exactly k. They need your help to determine the minimum amount of paint (in litres) needed to finish the job.

    Please note that the friends can't color the trees that are already colored.

    Input

    The first line contains three integers, n, m and k (1 ≤ k ≤ n ≤ 100, 1 ≤ m ≤ 100) — the number of trees, number of colors and beauty of the resulting coloring respectively.

    The second line contains n integers c1, c2, ..., cn (0 ≤ ci ≤ m), the initial colors of the trees. ci equals to 0 if the tree number i is uncolored, otherwise the i-th tree has color ci.

    Then n lines follow. Each of them contains m integers. The j-th number on the i-th of them line denotes pi, j (1 ≤ pi, j ≤ 109) — the amount of litres the friends need to color i-th tree with color j. pi, j's are specified even for the initially colored trees, but such trees still can't be colored.

    Output

    Print a single integer, the minimum amount of paint needed to color the trees. If there are no valid tree colorings of beauty k, print  - 1.

    Examples
    Input
    3 2 2
    0 0 0
    1 2
    3 4
    5 6
    Output
    10
    Input
    3 2 2
    2 1 2
    1 3
    2 4
    3 5
    Output
    -1
    Input
    3 2 2
    2 0 0
    1 3
    2 4
    3 5
    Output
    5
    Input
    3 2 3
    2 1 2
    1 3
    2 4
    3 5
    Output
    0
    Note

    In the first sample case, coloring the trees with colors 2, 1, 1 minimizes the amount of paint used, which equals to 2 + 3 + 5 = 10. Note that 1, 1, 1 would not be valid because the beauty of such coloring equals to 1 ({1, 1, 1} is a way to group the trees into a single group of the same color).

    In the second sample case, all the trees are colored, but the beauty of the coloring is 3, so there is no valid coloring, and the answer is  - 1.

    In the last sample case, all the trees are colored and the beauty of the coloring matches k, so no paint is used and the answer is 0.

    吐槽:

    B题看错题,认为只有0所在的行和列和对角线相等,没看Note,好伤QAQ

    D题有思路了,觉得就是把环找出来,每次从环中找i条边,然后排列组合即可。没敲完QAQ

    这场做的有点伤啊~~~


    这题是比较简单的dp

    d[i][j][k]表示第i个树涂上第j种颜色形成k组所花费的最少颜料

    如果当前树已经有了颜色,那么d[i][c[i]][k]=min{ d[i-1][c[i]][k], d[i-1][j!=c[i]][k-1] }

    否则d[i][j][k]=min{ d[i-1][j][k], d[i-1][x!=j][k-1] }+w[i][j]

    其实想法就是如果当前涂色个上一个涂色一样,那么就d[i][j][k]由d[i-1][j][k]得到,如果不一样,由d[i-1][x!=j][k-1]得到

    时间复杂度O(n^4),优化一下可以O(n^3)


    #include<bits/stdc++.h>
    using namespace std;
    #define rep(i,s,t) for(int i=(s);i<(t);i++)
    #define per(i,t,s) for(int i=(t);i>=(s);i--)
    #define fi first
    #define se second
    typedef long long ll;
    typedef unsigned long long ull;
    typedef pair<int, int>pii;
    const ll INF = 1e15 + 9;
    const int N = 100 + 9;
    ll d[N][N][N], w[N][N];
    int c[N], n, m, K;
    int main() {
        //freopen ("f.txt", "r", stdin);
    
        scanf ("%d%d%d", &n, &m, &K);
        rep (i, 1, n + 1) scanf ("%d", &c[i]);
        rep (i, 1, n + 1) rep (j, 1, m + 1) scanf ("%I64d", &w[i][j]);
        rep (i, 0, n + 1) rep (j, 0, m + 1) rep (k, 0, K + 1) d[i][j][k] = INF;
    
        d[0][0][0] = 0;
        rep (i, 1, n + 1) {
            if (c[i] != 0) {
                rep (k, 1, K + 1) {
                    d[i][c[i]][k] = min (d[i][c[i]][k], d[i - 1][c[i]][k]);
                    ll minn = INF;
                    rep (z, 0, m + 1) if (z != c[i]) minn = min (minn, d[i - 1][z][k - 1]);
                    d[i][c[i]][k] = min (d[i][c[i]][k], minn);
                }
            } else
                rep (k, 1, K + 1) {
                rep (j, 1, m + 1) {
                    d[i][j][k] = min (d[i][j][k], d[i - 1][j][k] + w[i][j]);
                    ll minn = INF;
                    rep (z, 0, m + 1) if (z != j) minn = min (minn, d[i - 1][z][k - 1]);
                    d[i][j][k] = min (d[i][j][k], minn + w[i][j]);
                }
            }
        }
        ll ans = INF;
        rep (i, 1, m + 1) ans = min (ans, d[n][i][K]);
        if (ans == INF) printf ("-1
    ");
        else printf ("%I64d
    ", ans);
        return 0;
    }
  • 相关阅读:
    网络管理和nmcli命令的使用——网络接口配置-bonding实验步骤
    raid组合优缺点介绍和创建LVM实验个人笔记
    磁盘分区就是这么简单,电脑小白都能看懂的磁盘分区教程!
    C盘优化之桌面移动法,拯救你爆满的C盘!
    电脑软件打开也有讲究,电脑软件打开方式总结!
    电脑使用建议大全,注意这些细节可以让你的电脑更好用!
    CentOS服务器apache绑定多个域名的方法
    CentOS 7使用yum安装PHP5.6
    PhpMyAdmin 配置文件现在需要一个短语密码的解决方法
    CentOs 7.*中配置安装phpMyAdmin的完整步骤记录
  • 原文地址:https://www.cnblogs.com/01world/p/5820487.html
Copyright © 2020-2023  润新知