Filebeat之input和output（包含Elasticsearch Output 、Logstash Output、 Redis Output、 File Output和 Console Output）

https://www.elastic.co/guide/en/beats/filebeat/1.3/filebeat-configuration-details.html

output:
  redis:
    # Set the host and port where to find Redis.
    host: "localhost"
    port: 6379

    # Uncomment out this option if you want to store the topology in Redis.
    # The default is false.
    save_topology: true

    # Optional index name. The default is filebeat and generates filebeat keys.
    index: "filebeat"

    # Optional Redis database number where the events are stored
    # The default is 0.
    db: 0

    # Optional Redis database number where the topology is stored
    # The default is 1. It must have a different value than db.
    db_topology: 1

    # Optional password to authenticate with. By default, no
    # password is set.
    # password: ""

    # Optional Redis initial connection timeout in seconds.
    # The default is 5 seconds.
    timeout: 5

    # Optional interval for reconnecting to failed Redis connections.
    # The default is 1 second.
    reconnect_interval: 1

output:
  redis:
    # Set the host and port where to find Redis.
    host: "192.168.80.12"
    port: 6379

    # Uncomment out this option if you want to store the topology in Redis.
    # The default is false.
    save_topology: true

    # Optional index name. The default is filebeat and generates filebeat keys.
    index: "filebeat"

    # Optional Redis database number where the events are stored
    # The default is 0.
    db: 0

    # Optional Redis database number where the topology is stored
    # The default is 1. It must have a different value than db.
    db_topology: 1

    # Optional password to authenticate with. By default, no
    # password is set.
    # password: ""

    # Optional Redis initial connection timeout in seconds.
    # The default is 5 seconds.
    timeout: 5

    # Optional interval for reconnecting to failed Redis connections.
    # The default is 1 second.
    reconnect_interval: 1

[hadoop@HadoopMaster filebeat-1.3.1-x86_64]$ pwd
/home/hadoop/app/filebeat-1.3.1-x86_64
[hadoop@HadoopMaster filebeat-1.3.1-x86_64]$ ./filebeat -c filebeat_es.yml

################### Filebeat Configuration Example #########################

############################# Filebeat ######################################
filebeat:
# List of prospectors to fetch data.
prospectors:
# Each - is a prospector. Below are the prospector specific configurations
-
# Paths that should be crawled and fetched. Glob based paths.
# To fetch all ".log" files from a specific level of subdirectories
# /var/log/*/*.log can be used.
# For each file found under this path, a harvester is started.
# Make sure not file is defined twice as this can lead to unexpected behaviour.
paths:
- /home/hadoop/app.log
#- c:programdataelasticsearchlogs*

# Configure the file encoding for reading files with international characters
# following the W3C recommendation for HTML5 (http://www.w3.org/TR/encoding).
# Some sample encodings:
# plain, utf-8, utf-16be-bom, utf-16be, utf-16le, big5, gb18030, gbk,
# hz-gb-2312, euc-kr, euc-jp, iso-2022-jp, shift-jis, ...
#encoding: plain

# Type of the files. Based on this the way the file is read is decided.
# The different types cannot be mixed in one prospector
#
# Possible options are:
# * log: Reads every line of the log file (default)
# * stdin: Reads the standard in
input_type: log

# Exclude lines. A list of regular expressions to match. It drops the lines that are
# matching any regular expression from the list. The include_lines is called before
# exclude_lines. By default, no lines are dropped.
# exclude_lines: ["^DBG"]

# Include lines. A list of regular expressions to match. It exports the lines that are
# matching any regular expression from the list. The include_lines is called before
# exclude_lines. By default, all the lines are exported.
# include_lines: ["^ERR", "^WARN"]

# Exclude files. A list of regular expressions to match. Filebeat drops the files that
# are matching any regular expression from the list. By default, no files are dropped.
# exclude_files: [".gz$"]

# Optional additional fields. These field can be freely picked
# to add additional information to the crawled log files for filtering
#fields:
# level: debug
# review: 1

# Set to true to store the additional fields as top level fields instead
# of under the "fields" sub-dictionary. In case of name conflicts with the
# fields added by Filebeat itself, the custom fields overwrite the default
# fields.
#fields_under_root: false

# Ignore files which were modified more then the defined timespan in the past.
# In case all files on your system must be read you can set this value very large.
# Time strings like 2h (2 hours), 5m (5 minutes) can be used.
#ignore_older: 0

# Close older closes the file handler for which were not modified
# for longer then close_older
# Time strings like 2h (2 hours), 5m (5 minutes) can be used.
#close_older: 1h

# Type to be published in the 'type' field. For Elasticsearch output,
# the type defines the document type these entries should be stored
# in. Default: log
#document_type: log

# Scan frequency in seconds.
# How often these files should be checked for changes. In case it is set
# to 0s, it is done as often as possible. Default: 10s
#scan_frequency: 10s

# Defines the buffer size every harvester uses when fetching the file
#harvester_buffer_size: 16384

# Maximum number of bytes a single log event can have
# All bytes after max_bytes are discarded and not sent. The default is 10MB.
# This is especially useful for multiline log messages which can get large.
#max_bytes: 10485760

# Mutiline can be used for log messages spanning multiple lines. This is common
# for Java Stack Traces or C-Line Continuation
#multiline:

# The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
#pattern: ^[

# Defines if the pattern set under pattern should be negated or not. Default is false.
#negate: false

# Match can be set to "after" or "before". It is used to define if lines should be append to a pattern
# that was (not) matched before or after or as long as a pattern is not matched based on negate.
# Note: After is the equivalent to previous and before is the equivalent to to next in Logstash
#match: after

# The maximum number of lines that are combined to one event.
# In case there are more the max_lines the additional lines are discarded.
# Default is 500
#max_lines: 500

# After the defined timeout, an multiline event is sent even if no new pattern was found to start a new event
# Default is 5s.
#timeout: 5s

# Setting tail_files to true means filebeat starts readding new files at the end
# instead of the beginning. If this is used in combination with log rotation
# this can mean that the first entries of a new file are skipped.
#tail_files: false

# Backoff values define how agressively filebeat crawls new files for updates
# The default values can be used in most cases. Backoff defines how long it is waited
# to check a file again after EOF is reached. Default is 1s which means the file
# is checked every second if new lines were added. This leads to a near real time crawling.
# Every time a new line appears, backoff is reset to the initial value.
#backoff: 1s

# Max backoff defines what the maximum backoff time is. After having backed off multiple times
# from checking the files, the waiting time will never exceed max_backoff idenependent of the
# backoff factor. Having it set to 10s means in the worst case a new line can be added to a log
# file after having backed off multiple times, it takes a maximum of 10s to read the new line
#max_backoff: 10s

# The backoff factor defines how fast the algorithm backs off. The bigger the backoff factor,
# the faster the max_backoff value is reached. If this value is set to 1, no backoff will happen.
# The backoff value will be multiplied each time with the backoff_factor until max_backoff is reached
#backoff_factor: 2

# This option closes a file, as soon as the file name changes.
# This config option is recommended on windows only. Filebeat keeps the files it's reading open. This can cause
# issues when the file is removed, as the file will not be fully removed until also Filebeat closes
# the reading. Filebeat closes the file handler after ignore_older. During this time no new file with the
# same name can be created. Turning this feature on the other hand can lead to loss of data
# on rotate files. It can happen that after file rotation the beginning of the new
# file is skipped, as the reading starts at the end. We recommend to leave this option on false
# but lower the ignore_older value to release files faster.
#force_close_files: false

# Additional prospector
#-
# Configuration to use stdin input
#input_type: stdin

# General filebeat configuration options
#
# Event count spool threshold - forces network flush if exceeded
#spool_size: 2048

# Enable async publisher pipeline in filebeat (Experimental!)
#publish_async: false

# Defines how often the spooler is flushed. After idle_timeout the spooler is
# Flush even though spool_size is not reached.
#idle_timeout: 5s

# Name of the registry file. Per default it is put in the current working
# directory. In case the working directory is changed after when running
# filebeat again, indexing starts from the beginning again.
#registry_file: .filebeat

# Full Path to directory with additional prospector configuration files. Each file must end with .yml
# These config files must have the full filebeat config part inside, but only
# the prospector part is processed. All global options like spool_size are ignored.
# The config_dir MUST point to a different directory then where the main filebeat config file is in.
#config_dir:

###############################################################################
############################# Libbeat Config ##################################
# Base config file used by all other beats for using libbeat features

############################# Output ##########################################

# Configure what outputs to use when sending the data collected by the beat.
# Multiple outputs may be used.
output:

### Elasticsearch as output
elasticsearch:
# Array of hosts to connect to.
# Scheme and port can be left out and will be set to the default (http and 9200)
# In case you specify and additional path, the scheme is required: http://localhost:9200/path
# IPv6 addresses should always be defined as: https://[2001:db8::1]:9200
hosts: ["192.168.80.10:9200","192.168.80.11:9200","192.168.80.12:9200"]

# Optional protocol and basic auth credentials.
protocol: "https"
username: "es_admin"
password: "123456"

# Number of workers per Elasticsearch host.
#worker: 1

# Optional index name. The default is "filebeat" and generates
# [filebeat-]YYYY.MM.DD keys.
index: "filebeat"

# A template is used to set the mapping in Elasticsearch
# By default template loading is disabled and no template is loaded.
# These settings can be adjusted to load your own template or overwrite existing ones
#template:

# Template name. By default the template name is filebeat.
#name: "filebeat"

# Path to template file
#path: "filebeat.template.json"

# Overwrite existing template
#overwrite: false

# Optional HTTP Path
#path: "/elasticsearch"

# Proxy server url
#proxy_url: http://proxy:3128

# The number of times a particular Elasticsearch index operation is attempted. If
# the indexing operation doesn't succeed after this many retries, the events are
# dropped. The default is 3.
#max_retries: 3

# The maximum number of events to bulk in a single Elasticsearch bulk API index request.
# The default is 50.
#bulk_max_size: 50

# Configure http request timeout before failing an request to Elasticsearch.
#timeout: 90

# The number of seconds to wait for new events between two bulk API index requests.
# If `bulk_max_size` is reached before this interval expires, addition bulk index
# requests are made.
#flush_interval: 1

# Boolean that sets if the topology is kept in Elasticsearch. The default is
# false. This option makes sense only for Packetbeat.
#save_topology: false

# The time to live in seconds for the topology information that is stored in
# Elasticsearch. The default is 15 seconds.
#topology_expire: 15

# tls configuration. By default is off.
tls:
# List of root certificates for HTTPS server verifications
certificate_authorities: ["/etc/pki/root/ca.pem"]

# Certificate for TLS client authentication
certificate: "/etc/pki/client/cert.pem"

# Client Certificate Key
certificate_key: "/etc/pki/client/cert.key"

# Controls whether the client verifies server certificates and host name.
# If insecure is set to true, all server host names and certificates will be
# accepted. In this mode TLS based connections are susceptible to
# man-in-the-middle attacks. Use only for testing.
#insecure: true

# Configure cipher suites to be used for TLS connections
#cipher_suites: []

# Configure curve types for ECDHE based cipher suites
#curve_types: []

# Configure minimum TLS version allowed for connection to logstash
#min_version: 1.0

# Configure maximum TLS version allowed for connection to logstash
#max_version: 1.2

### Logstash as output
#logstash:
# The Logstash hosts
#hosts: ["localhost:5044"]

# Number of workers per Logstash host.
#worker: 1

# The maximum number of events to bulk into a single batch window. The
# default is 2048.
#bulk_max_size: 2048

# Set gzip compression level.
#compression_level: 3

# Optional load balance the events between the Logstash hosts
#loadbalance: true

# Optional index name. The default index name depends on the each beat.
# For Packetbeat, the default is set to packetbeat, for Topbeat
# top topbeat and for Filebeat to filebeat.
#index: filebeat

# Optional TLS. By default is off.
#tls:
# List of root certificates for HTTPS server verifications
#certificate_authorities: ["/etc/pki/root/ca.pem"]

# Certificate for TLS client authentication
#certificate: "/etc/pki/client/cert.pem"

# Client Certificate Key
#certificate_key: "/etc/pki/client/cert.key"

# Controls whether the client verifies server certificates and host name.
# If insecure is set to true, all server host names and certificates will be
# accepted. In this mode TLS based connections are susceptible to
# man-in-the-middle attacks. Use only for testing.
#insecure: true

# Configure cipher suites to be used for TLS connections
#cipher_suites: []

# Configure curve types for ECDHE based cipher suites
#curve_types: []

### File as output
#file:
# Path to the directory where to save the generated files. The option is mandatory.
#path: "/tmp/filebeat"

# Name of the generated files. The default is `filebeat` and it generates files: `filebeat`, `filebeat.1`, `filebeat.2`, etc.
#filename: filebeat

# Maximum size in kilobytes of each file. When this size is reached, the files are
# rotated. The default value is 10 MB.
#rotate_every_kb: 10000

# Maximum number of files under path. When this number of files is reached, the
# oldest file is deleted and the rest are shifted from last to first. The default
# is 7 files.
#number_of_files: 7

### Console output
#console:
# Pretty print json event
#pretty: false

############################# Shipper #########################################

shipper:
# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
# If this options is not defined, the hostname is used.
#name:

# The tags of the shipper are included in their own field with each
# transaction published. Tags make it easy to group servers by different
# logical properties.
#tags: ["service-X", "web-tier"]

# Uncomment the following if you want to ignore transactions created
# by the server on which the shipper is installed. This option is useful
# to remove duplicates if shippers are installed on multiple servers.
#ignore_outgoing: true

# How often (in seconds) shippers are publishing their IPs to the topology map.
# The default is 10 seconds.
#refresh_topology_freq: 10

# Expiration time (in seconds) of the IPs published by a shipper to the topology map.
# All the IPs will be deleted afterwards. Note, that the value must be higher than
# refresh_topology_freq. The default is 15 seconds.
#topology_expire: 15

# Internal queue size for single events in processing pipeline
#queue_size: 1000

# Configure local GeoIP database support.
# If no paths are not configured geoip is disabled.
#geoip:
#paths:
# - "/usr/share/GeoIP/GeoLiteCity.dat"
# - "/usr/local/var/GeoIP/GeoLiteCity.dat"

############################# Logging #########################################

# There are three options for the log ouput: syslog, file, stderr.
# Under Windos systems, the log files are per default sent to the file output,
# under all other system per default to syslog.
logging:

# Send all logging output to syslog. On Windows default is false, otherwise
# default is true.
to_syslog: false

# Write all logging output to files. Beats automatically rotate files if rotateeverybytes
# limit is reached.
to_files: true

# To enable logging to files, to_files option has to be set to true
files:
# The directory where the log files will written to.
path: /home/hadoop/mybeat

# The name of the files where the logs are written to.
name: mybeat

# Configure log file size limit. If limit is reached, log file will be
# automatically rotated
rotateeverybytes: 10485760 # = 10MB

# Number of rotated log files to keep. Oldest files will be deleted first.
keepfiles: 7

# Enable debug output for selected components. To enable all selectors use ["*"]
# Other available selectors are beat, publish, service
# Multiple selectors can be chained.
#selectors: [ ]

# Sets log level. The default log level is error.
# Available log levels are: critical, error, warning, info, debug
level: debug

[hadoop@HadoopMaster filebeat-1.3.1-x86_64]$ pwd
/home/hadoop/app/filebeat-1.3.1-x86_64
[hadoop@HadoopMaster filebeat-1.3.1-x86_64]$ ./filebeat -c filebeat_logstash.yml