• CentOS7 Failed to start LSB: Bring up/down解决方法(真正有效的方法)


    刚刚装好的虚拟机突然不能上网了,报错很诡异,具体报错如下:

    /etc/init.d/network restart

    Restarting network (via systemctl):  Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details.

    [失败]

    使用systemctl status network.service命令查看结果如下:

    network.service - LSB: Bring up/down networking

    Loaded: loaded (/etc/rc.d/init.d/network)

    Active: failed (Result: exit-code) since 三 2016-08-17 11:34:36 CST; 54s ago

    Docs: man:systemd-sysv-generator(8)

    Process: 3847 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)

    8月 17 11:34:36 python.cn network[3847]: RTNETLINK answers: File exists

    8月 17 11:34:36 python.cn network[3847]: RTNETLINK answers: File exists

    8月 17 11:34:36 python.cn network[3847]: RTNETLINK answers: File exists

    8月 17 11:34:36 python.cn network[3847]: RTNETLINK answers: File exists

    8月 17 11:34:36 python.cn network[3847]: RTNETLINK answers: File exists

    8月 17 11:34:36 python.cn network[3847]: RTNETLINK answers: File exists

    8月 17 11:34:36 python.cn systemd[1]: network.service: control process exited, code=exited status=1

    8月 17 11:34:36 python.cn systemd[1]: Failed to start LSB: Bring up/down networking.

    8月 17 11:34:36 python.cn systemd[1]: Unit network.service entered failed state.

    8月 17 11:34:36 python.cn systemd[1]: network.service failed.

    查看系统日志,报错如下:

    Aug 17 11:34:36 python network: RTNETLINK answers: File exists

    Aug 17 11:34:36 python network: RTNETLINK answers: File exists

    Aug 17 11:34:36 python network: RTNETLINK answers: File exists

    Aug 17 11:34:36 python network: RTNETLINK answers: File exists

    Aug 17 11:34:36 python network: RTNETLINK answers: File exists

    Aug 17 11:34:36 python network: RTNETLINK answers: File exists

    Aug 17 11:34:36 python network: RTNETLINK answers: File exists

    Aug 17 11:34:36 python network: RTNETLINK answers: File exists

    Aug 17 11:34:36 python network: RTNETLINK answers: File exists

    Aug 17 11:34:36 python systemd: network.service: control process exited, code=exited status=1

    Aug 17 11:34:36 python systemd: Failed to start LSB: Bring up/down networking.

    Aug 17 11:34:36 python systemd: Unit network.service entered failed state.

    Aug 17 11:34:36 python systemd: network.service failed.

    Aug 17 11:36:28 python systemd: Starting LSB: Bring up/down networking...

    Aug 17 11:36:29 python network: 正在打开环回接口: 无法载入文件 '/etc/sysconfig/network-scripts/ifcfg-lo'

    Aug 17 11:36:29 python network: 无法载入文件 '/etc/sysconfig/network-scripts/ifcfg-lo'

    Aug 17 11:36:29 python network: 无法载入文件 '/etc/sysconfig/network-scripts/ifcfg-lo'

    Aug 17 11:36:29 python network: 无法载入文件 '/etc/sysconfig/network-scripts/ifcfg-lo'

    Aug 17 11:36:29 python network: [  确定  ]

    Aug 17 11:36:29 python network: 正在打开接口 eno16777736: 错误:激活连接失败:No suitable device found for this connection.

    经查,确认/etc/sysconfig/network-scripts/ifcfg-lo文件是存在的。问题出现在哪里呢?无法,只好百度一下吧,百度出来的结果竟然基本一样。

    百度答案:

    mac地址不对,修改mac地址。

    也许有人确实是mac问题,但是莫名其妙怎么可能mac地址更改了,除非你添加新网卡或者克隆的虚拟机。

    我特么真笑了,天下百度文章一大抄啊。。。。。。。。

    没办法了,Google一下吧,偶然看到一个文章,大意是跟系统自带的NetworkManager这个管理套件有关系,关掉就可以解决。

    试一下:

    systemctl stop NetworkManager

    systemctl disable NetworkManager

    Removed symlink /etc/systemd/system/multi-user.target.wants/NetworkManager.service.

    Removed symlink /etc/systemd/system/dbus-org.freedesktop.NetworkManager.service.

    Removed symlink /etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service.

    重新启动网络:

    systemctl start network.service

    ifconfig |grep eno

    eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

    inet 192.168.1.192  netmask 255.255.255.0  broadcast 192.168.1.255

    inet6 fe80::20c:29ff:fe3d:b305  prefixlen 64  scopeid 0x20<link>

    ether 00:0c:29:3d:b3:05  txqueuelen 1000  (Ethernet)

    RX packets 2  bytes 120 (120.0 B)

    RX errors 0  dropped 0  overruns 0  frame 0

    TX packets 22  bytes 3551 (3.4 KiB)

    TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

    网络正常启动,访问正常。





    还有其他两种可以尝试的方法虽然这两种都没解决我的问题,但是也许能解决其他人的问题:
    第一种方法查看错误:

    [root@localhost ~]# systemctl status network.service
    ● network.service - LSB: Bring up/down networking
       Loaded: loaded (/etc/rc.d/init.d/network; bad; vendor preset: disabled)
       Active: failed (Result: exit-code) since Wed 2017-04-26 06:22:44 EDT; 12s ago
         Docs: man:systemd-sysv-generator(8)
      Process: 2664 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)

    Apr 26 06:22:44 localhost.localdomain network[2664]: RTNETLINK answers: File exists
    Apr 26 06:22:44 localhost.localdomain network[2664]: RTNETLINK answers: File exists
    Apr 26 06:22:44 localhost.localdomain network[2664]: RTNETLINK answers: File exists
    Apr 26 06:22:44 localhost.localdomain network[2664]: RTNETLINK answers: File exists
    Apr 26 06:22:44 localhost.localdomain network[2664]: RTNETLINK answers: File exists
    Apr 26 06:22:44 localhost.localdomain network[2664]: RTNETLINK answers: File exists
    Apr 26 06:22:44 localhost.localdomain systemd[1]: network.service: control process exited, code=exited status=1
    Apr 26 06:22:44 localhost.localdomain systemd[1]: Failed to start LSB: Bring up/down networking.
    Apr 26 06:22:44 localhost.localdomain systemd[1]: Unit network.service entered failed state.
    Apr 26 06:22:44 localhost.localdomain systemd[1]: network.service failed.
    [root@localhost ~]# vi /etc/sysconfig/network-scripts/ifcfg-ens33
    [root@localhost ~]# systemctl status network.service
    ● network.service - LSB: Bring up/down networking
       Loaded: loaded (/etc/rc.d/init.d/network; bad; vendor preset: disabled)
       Active: failed (Result: exit-code) since Wed 2017-04-26 06:22:44 EDT; 1min 11s ago
         Docs: man:systemd-sysv-generator(8)
      Process: 2664 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)

    查看网卡地址:
    [root@localhost ~]# ip addr
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
           valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host
           valid_lft forever preferred_lft forever
    2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
        link/ether 00:0c:29:54:ed:b7 brd ff:ff:ff:ff:ff:ff
        inet 192.168.218.100/24 brd 192.168.218.255 scope global ens33
           valid_lft forever preferred_lft forever
        inet6 fe80::20c:29ff:fe54:edb7/64 scope link
           valid_lft forever preferred_lft forever

    将上面的网卡地址00:0c:29:54:ed:b7添加到网卡的配置中:
    [root@bogon ~]# vi /etc/sysconfig/network-scripts/ifcfg-ens33
    加入:
    HWADDR=00:0c:29:54:ed:b7

    方法二:

    通过查找相关文档,使用如下方法解决了问题:设定开机启动一个名为NetworkManager-wait-online服务,命令为:

    systemctl enable NetworkManager-wait-online.service





  • 相关阅读:
    获取类中虚函数地址
    指向成员函数指针,虚函数指针,静态成员函数指针
    桥接模式 Bridge
    装饰模式 Decorate
    享元模式 FlyWeight
    java中的foreach循环
    java可变参数
    java异常处理
    java设计模式之单例设计模式和多例设计模式
    java四种访问控制权限:public ,default,protected,private
  • 原文地址:https://www.cnblogs.com/xjl456852/p/6770118.html
Copyright © 2020-2023  润新知