CentOS7源码编译安装FreeRadius3.17
来源 https://blog.51cto.com/liqingbiao/2159741
（一）环境简介
1.OS:Centos7.4
2.软件：Freeradiusd3.17（ftp://ftp.freeradius.org/pub/freeradius/freeradius-server-3.0.17.tar.gz）
3.网站：https://freeradius.org/
（二）安装
1.yum安装所需的依赖包
[root@localhost raddb]#yum install openssl openssl-devel libtalloc-devel libtalloc* -y
[root@localhost raddb]#yum install openldap-devel python-devel -y2.解压和编译安装。由于编译安装默认的路径是/usr/local/etc/raddb/下
[root@localhost opt]#wget ftp://ftp.freeradius.org/pub/freeradius/freeradius-server-3.0.17.tar.gz
[root@localhost opt]# tar xf freeradius-server-3.0.17.tar.gz
[root@localhost opt]#cd freeradius-server-3.0.17
[root@localhost freeradius-server-3.0.17]#./configure
[root@localhost freeradius-server-3.0.17]#make && make certs && make install
[root@localhost freeradius-server-3.0.17]# cd /usr/local/etc/raddb/
[root@localhost raddb]# ls
certs experimental.conf mods-available panic.gdb radiusd.conf sites-enabled users
clients.conf hints mods-config policy.d README.rst templates.conf
dictionary huntgroups mods-enabled proxy.conf sites-available trigger.conf3.配置radiusd启动服务文件
[root@localhost ~]# groupadd radiusd
[root@localhost ~]# useradd -g radiusd radiusd -s /sbin/nologin
[root@localhost ~]# vim /usr/lib/systemd/system/radiusd.service
[Unit]
Description=FreeRADIUS high performance RADIUS server.
After=syslog.target network.target ipa.service dirsrv.target krb5kdc.service
[Service]
Type=forking
PIDFile=/usr/local/var/run/radiusd/radiusd.pid
ExecStartPre=-/bin/chown -R radiusd.radiusd /usr/local/var/run/radiusd
ExecStartPre=/usr/local/sbin/radiusd -C
ExecStart=/usr/local/sbin/radiusd -d /usr/local/etc/raddb
ExecReload=/usr/local/sbin/radiusd -C
ExecReload=/bin/kill -HUP $MAINPID
[Install]
WantedBy=multi-user.target4.创建启动服务
[root@localhost opt]# systemctl enable radiusd
[root@localhost opt]# systemctl start radiusd
[root@localhost opt]# systemctl status radiusd
● radiusd.service - FreeRADIUS high performance RADIUS server.
Loaded: loaded (/usr/lib/systemd/system/radiusd.service; enabled; vendor preset: disabled)
Active: active (running) since Tue 2018-08-14 14:11:51 CST; 13min ago
Main PID: 26259 (radiusd)
CGroup: /system.slice/radiusd.service
└─26259 /usr/local/sbin/radiusd -d /usr/local/etc/raddb
Aug 14 14:11:51 localhost.localdomain systemd[1]: Starting FreeRADIUS high performance RADIUS server....
Aug 14 14:11:51 localhost.localdomain systemd[1]: Started FreeRADIUS high performance RADIUS server..
[root@localhost opt]# systemctl restart radiusd
[root@localhost opt]# systemctl status radiusd
● radiusd.service - FreeRADIUS high performance RADIUS server.
Loaded: loaded (/usr/lib/systemd/system/radiusd.service; enabled; vendor preset: disabled)
Active: active (running) since Tue 2018-08-14 14:25:31 CST; 1s ago
Process: 29267 ExecStart=/usr/local/sbin/radiusd -d /usr/local/etc/raddb (code=exited, status=0/SUCCESS)
Process: 29263 ExecStartPre=/usr/local/sbin/radiusd -C (code=exited, status=0/SUCCESS)
Process: 29261 ExecStartPre=/bin/chown -R radiusd.radiusd /usr/local/var/run/radiusd (code=exited, status=0/SUCCESS)
Main PID: 29270 (radiusd)
CGroup: /system.slice/radiusd.service
└─29270 /usr/local/sbin/radiusd -d /usr/local/etc/raddb
Aug 14 14:25:31 localhost.localdomain systemd[1]: Starting FreeRADIUS high performance RADIUS server....
Aug 14 14:25:31 localhost.localdomain systemd[1]: Started FreeRADIUS high performance RADIUS server..备注：如果系统是centos6.x以下的版本，具体配置如下
[root@FreeRadius2 raddb]# cp /usr/local/sbin/rc.radiusd /etc/init.d/radiused
[root@FreeRadius2 raddb]# /etc/init.d/radiused start当出现报错的时候“/usr/local/etc/raddb/mods-enabled/ldap[1]: Failed to link to module 'rlm_ldap': /usr/local/lib/rlm_ldap.so: cannot open shared object file: No such file or directory
”
造成服务起不来是由于编译的时候出现warning时编译rlm_ldap失败造成的。需要libldap2-dev 库文件
=== configuring in src/modules/rlm_ldap (/opt/freeradius-server-3.0.17/src/modules/rlm_ldap)
configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr/local' --cache-file=../../../config.cache --srcdir=.
configure: loading cache ../../../config.cache
checking for gcc... (cached) gcc
checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ISO C89... none needed
> checking for pthread_create in -lpthread... yes
> checking for ldap_init in -lldap_r... no
> checking for ldap.h... no
> configure: WARNING: silently not building rlm_ldap.
> configure: WARNING: FAILURE: rlm_ldap requires: libldap_r ldap.h.
> configure: creating ./config.status
> config.status: creating Makefile解决办法是
[root@localhost mods-available]# yum install openldap-devel python-devel -y
既可以解决。
ldap服务器地址: 172.20.10.11 radius服务器地址: 172.20.101.184
条件：
1、首先ldap服务器和radius服务器可以互相ping通
2、关闭防火墙
3、SELINUX=disabled
1、安装
yum install -y freeradius freeradius-utils freeradius-ldap
radiusd -X //测试 如果输出Ready to process requests，那么安装成功
2、启动radius服务
systemctl start radiusd
systemctl enable radiusd
3、测试radius本地用户
vim /etc/raddb/users
test111 Cleartext-Password := “password"
radtest test111 password 127.0.0.1 0 testing123
其中test111是用户，password是密码，testing123 是共享密钥
4、配置客户端
vim /etc/raddb/clients.conf
client office-network {
ipaddr = 192.168.0.0/16
secret = 1234567890
nas_type = other
}
client wq-network {
ipaddr = 172.20.0.0/16
secret = 1234567890
nas_type = other
}
5、启用ldap
vim /etc/raddb/mods-available/ldap
ldap {
server = ‘172.20.10.11’
port = 389
identity = ‘cn=ldap,dc=aaa,dc=com’
password = 1234567890
base_dn = 'dc=aaa,dc=com’
ln -s /etc/raddb/mods-available/ldap /etc/raddb/mods-enabled/ldap
6、编辑eap文件
cat /etc/raddb/mods-enabled/eap|grep -v “#”|grep -v "^$”
修改下面部分
default_eap_type = peap
default_eap_type = peap
7、重启radius
systemctl restart radiusd
8、测试
radtest network.wu password123 172.20.101.184 1812 1234567890
Sent Access-Request Id 165 from 0.0.0.0:38042 to 172.20.101.184:1812 length 81
User-Name = “network.wu”
User-Password = “password123”
NAS-IP-Address = 172.20.101.184
NAS-Port = 1812
Message-Authenticator = 0x00
Cleartext-Password = “password123”
Received Access-Accept Id 165 from 172.20.101.184:1812 to 0.0.0.0:0 length 20
出现 Access-Accept表示成功
[root@localhost ~]# yum list installed Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * epel: mirrors.ustc.edu.cn Installed Packages NetworkManager.x86_64 1:1.18.8-1.el7 @anaconda NetworkManager-libnm.x86_64 1:1.18.8-1.el7 @anaconda NetworkManager-team.x86_64 1:1.18.8-1.el7 @anaconda NetworkManager-tui.x86_64 1:1.18.8-1.el7 @anaconda NetworkManager-wifi.x86_64 1:1.18.8-1.el7 @anaconda acl.x86_64 2.2.51-15.el7 @anaconda aic94xx-firmware.noarch 30-6.el7 @anaconda alsa-firmware.noarch 1.0.28-2.el7 @anaconda alsa-lib.x86_64 1.1.8-1.el7 @anaconda alsa-tools-firmware.x86_64 1.1.0-1.el7 @anaconda apr.x86_64 1.4.8-7.el7 @base apr-util.x86_64 1.5.2-6.el7 @base audit.x86_64 2.8.5-4.el7 @anaconda audit-libs.x86_64 2.8.5-4.el7 @anaconda authconfig.x86_64 6.2.8-30.el7 @anaconda autoconf.noarch 2.69-11.el7 @base automake.noarch 1.13.4-3.el7 @base basesystem.noarch 10.0-7.el7.centos @anaconda bash.x86_64 4.2.46-34.el7 @anaconda bash-completion.noarch 1:2.1-8.el7 @base bc.x86_64 1.06.95-13.el7 @anaconda bind-export-libs.x86_64 32:9.11.4-26.P2.el7 @anaconda binutils.x86_64 2.27-44.base.el7 @anaconda biosdevname.x86_64 0.7.3-2.el7 @anaconda btrfs-progs.x86_64 4.9.1-1.el7 @anaconda bzip2-libs.x86_64 1.0.6-13.el7 @anaconda ca-certificates.noarch 2020.2.41-70.0.el7_8 @anaconda centos-indexhtml.noarch 7-9.el7.centos @base centos-logos.noarch 70.0.6-3.el7.centos @anaconda centos-release.x86_64 7-9.2009.0.el7.centos @anaconda chkconfig.x86_64 1.7.6-1.el7 @anaconda coreutils.x86_64 8.22-24.el7 @anaconda cpio.x86_64 2.11-28.el7 @anaconda cpp.x86_64 4.8.5-44.el7 @base cracklib.x86_64 2.9.0-11.el7 @anaconda cracklib-dicts.x86_64 2.9.0-11.el7 @anaconda crda.x86_64 3.18_2018.05.31-4.el7 @base cronie.x86_64 1.4.11-23.el7 @anaconda cronie-anacron.x86_64 1.4.11-23.el7 @anaconda crontabs.noarch 1.11-6.20121102git.el7 @anaconda cryptsetup-libs.x86_64 2.0.3-6.el7 @anaconda curl.x86_64 7.29.0-59.el7_9.1 @updates cyrus-sasl.x86_64 2.1.26-23.el7 @base cyrus-sasl-devel.x86_64 2.1.26-23.el7 @base cyrus-sasl-lib.x86_64 2.1.26-23.el7 @anaconda dbus.x86_64 1:1.10.24-15.el7 @anaconda dbus-glib.x86_64 0.100-7.el7 @anaconda dbus-libs.x86_64 1:1.10.24-15.el7 @anaconda dbus-python.x86_64 1.1.1-9.el7 @anaconda dejavu-fonts-common.noarch 2.33-6.el7 @base dejavu-sans-fonts.noarch 2.33-6.el7 @base device-mapper.x86_64 7:1.02.170-6.el7 @anaconda device-mapper-event.x86_64 7:1.02.170-6.el7 @anaconda device-mapper-event-libs.x86_64 7:1.02.170-6.el7 @anaconda device-mapper-libs.x86_64 7:1.02.170-6.el7 @anaconda device-mapper-persistent-data.x86_64 0.8.5-3.el7 @anaconda dhclient.x86_64 12:4.2.5-82.el7.centos @anaconda dhcp-common.x86_64 12:4.2.5-82.el7.centos @anaconda dhcp-libs.x86_64 12:4.2.5-82.el7.centos @anaconda diffutils.x86_64 3.3-5.el7 @anaconda dmidecode.x86_64 1:3.2-5.el7 @anaconda dracut.x86_64 033-572.el7 @anaconda dracut-config-rescue.x86_64 033-572.el7 @anaconda dracut-network.x86_64 033-572.el7 @anaconda e2fsprogs.x86_64 1.42.9-19.el7 @anaconda e2fsprogs-libs.x86_64 1.42.9-19.el7 @anaconda ebtables.x86_64 2.0.10-16.el7 @anaconda elfutils-default-yama-scope.noarch 0.176-5.el7 @anaconda elfutils-devel.x86_64 0.176-5.el7 @base elfutils-libelf.x86_64 0.176-5.el7 @anaconda elfutils-libelf-devel.x86_64 0.176-5.el7 @base elfutils-libs.x86_64 0.176-5.el7 @anaconda epel-release.noarch 7-11 @extras ethtool.x86_64 2:4.8-10.el7 @anaconda expat.x86_64 2.1.0-12.el7 @anaconda file.x86_64 5.11-37.el7 @anaconda file-libs.x86_64 5.11-37.el7 @anaconda filesystem.x86_64 3.2-25.el7 @anaconda findutils.x86_64 1:4.5.11-6.el7 @anaconda fipscheck.x86_64 1.4.1-6.el7 @anaconda fipscheck-lib.x86_64 1.4.1-6.el7 @anaconda firewalld.noarch 0.6.3-11.el7 @anaconda firewalld-filesystem.noarch 0.6.3-11.el7 @anaconda fontconfig.x86_64 2.13.0-4.3.el7 @base fontpackages-filesystem.noarch 1.44-8.el7 @base freetype.x86_64 2.8-14.el7 @anaconda fxload.x86_64 2002_04_11-16.el7 @anaconda gawk.x86_64 4.0.2-4.el7_3.1 @anaconda gcc.x86_64 4.8.5-44.el7 @base gcc-c++.x86_64 4.8.5-44.el7 @base gd.x86_64 2.0.35-27.el7_9 @updates gdbm.x86_64 1.10-8.el7 @anaconda gdbm-devel.x86_64 1.10-8.el7 @base gettext.x86_64 0.19.8.1-3.el7 @anaconda gettext-libs.x86_64 0.19.8.1-3.el7 @anaconda git.x86_64 1.8.3.1-23.el7_8 @base glib2.x86_64 2.56.1-7.el7 @anaconda glibc.x86_64 2.17-317.el7 @anaconda glibc-common.x86_64 2.17-317.el7 @anaconda glibc-devel.x86_64 2.17-317.el7 @base glibc-headers.x86_64 2.17-317.el7 @base gmp.x86_64 1:6.0.0-15.el7 @anaconda gnupg2.x86_64 2.0.22-5.el7_5 @anaconda gobject-introspection.x86_64 1.56.1-1.el7 @anaconda gperftools-libs.x86_64 2.6.1-1.el7 @base gpgme.x86_64 1.3.2-5.el7 @anaconda gpm-libs.x86_64 1.20.7-6.el7 @base grep.x86_64 2.20-3.el7 @anaconda groff-base.x86_64 1.22.2-8.el7 @anaconda grub2.x86_64 1:2.02-0.86.el7.centos @anaconda grub2-common.noarch 1:2.02-0.86.el7.centos @anaconda grub2-pc.x86_64 1:2.02-0.86.el7.centos @anaconda grub2-pc-modules.noarch 1:2.02-0.86.el7.centos @anaconda grub2-tools.x86_64 1:2.02-0.86.el7.centos @anaconda grub2-tools-extra.x86_64 1:2.02-0.86.el7.centos @anaconda grub2-tools-minimal.x86_64 1:2.02-0.86.el7.centos @anaconda grubby.x86_64 8.28-26.el7 @anaconda gzip.x86_64 1.5-10.el7 @anaconda hardlink.x86_64 1:1.0-19.el7 @anaconda hostname.x86_64 3.13-3.el7_7.1 @anaconda htop.x86_64 2.2.0-3.el7 @epel httpd.x86_64 2.4.6-97.el7.centos @updates httpd-tools.x86_64 2.4.6-97.el7.centos @updates hwdata.x86_64 0.252-9.7.el7 @anaconda info.x86_64 5.1-5.el7 @anaconda initscripts.x86_64 9.49.53-1.el7 @anaconda iproute.x86_64 4.11.0-30.el7 @anaconda iprutils.x86_64 2.4.17.1-3.el7 @anaconda ipset.x86_64 7.1-1.el7 @anaconda ipset-libs.x86_64 7.1-1.el7 @anaconda iptables.x86_64 1.4.21-35.el7 @anaconda iptables-services.x86_64 1.4.21-35.el7 @base iputils.x86_64 20160308-10.el7 @anaconda irqbalance.x86_64 3:1.0.7-12.el7 @anaconda ivtv-firmware.noarch 2:20080701-26.el7 @anaconda iw.x86_64 4.3-2.el7 @base iwl100-firmware.noarch 39.31.5.1-79.el7 @anaconda iwl1000-firmware.noarch 1:39.31.5.1-79.el7 @anaconda iwl105-firmware.noarch 18.168.6.1-79.el7 @anaconda iwl135-firmware.noarch 18.168.6.1-79.el7 @anaconda iwl2000-firmware.noarch 18.168.6.1-79.el7 @anaconda iwl2030-firmware.noarch 18.168.6.1-79.el7 @anaconda iwl3160-firmware.noarch 25.30.13.0-79.el7 @anaconda iwl3945-firmware.noarch 15.32.2.9-79.el7 @anaconda iwl4965-firmware.noarch 228.61.2.24-79.el7 @anaconda iwl5000-firmware.noarch 8.83.5.1_1-79.el7 @anaconda iwl5150-firmware.noarch 8.24.2.2-79.el7 @anaconda iwl6000-firmware.noarch 9.221.4.1-79.el7 @anaconda iwl6000g2a-firmware.noarch 18.168.6.1-79.el7 @anaconda iwl6000g2b-firmware.noarch 18.168.6.1-79.el7 @anaconda iwl6050-firmware.noarch 41.28.5.1-79.el7 @anaconda iwl7260-firmware.noarch 25.30.13.0-79.el7 @anaconda jansson.x86_64 2.10-1.el7 @anaconda json-c.x86_64 0.11-4.el7_0 @anaconda kbd.x86_64 1.15.5-15.el7 @anaconda kbd-legacy.noarch 1.15.5-15.el7 @anaconda kbd-misc.noarch 1.15.5-15.el7 @anaconda kernel.x86_64 3.10.0-1160.el7 @anaconda kernel-devel.x86_64 3.10.0-1160.11.1.el7 @updates kernel-headers.x86_64 3.10.0-1160.11.1.el7 @updates kernel-tools.x86_64 3.10.0-1160.el7 @anaconda kernel-tools-libs.x86_64 3.10.0-1160.el7 @anaconda kexec-tools.x86_64 2.0.15-51.el7 @anaconda keyutils-libs.x86_64 1.5.8-3.el7 @anaconda keyutils-libs-devel.x86_64 1.5.8-3.el7 @base kmod.x86_64 20-28.el7 @anaconda kmod-libs.x86_64 20-28.el7 @anaconda kpartx.x86_64 0.4.9-133.el7 @anaconda krb5-devel.x86_64 1.15.1-50.el7 @base krb5-libs.x86_64 1.15.1-50.el7 @anaconda less.x86_64 458-9.el7 @anaconda libX11.x86_64 1.6.7-3.el7_9 @updates libX11-common.noarch 1.6.7-3.el7_9 @updates libXau.x86_64 1.0.8-2.1.el7 @base libXpm.x86_64 3.5.12-1.el7 @base libacl.x86_64 2.2.51-15.el7 @anaconda libaio.x86_64 0.3.109-13.el7 @anaconda libassuan.x86_64 2.1.0-3.el7 @anaconda libattr.x86_64 2.4.46-13.el7 @anaconda libblkid.x86_64 2.23.2-65.el7 @anaconda libcap.x86_64 2.22-11.el7 @anaconda libcap-ng.x86_64 0.7.5-4.el7 @anaconda libcom_err.x86_64 1.42.9-19.el7 @anaconda libcom_err-devel.x86_64 1.42.9-19.el7 @base libcroco.x86_64 0.6.12-4.el7 @anaconda libcurl.x86_64 7.29.0-59.el7_9.1 @updates libdaemon.x86_64 0.14-7.el7 @anaconda libdb.x86_64 5.3.21-25.el7 @anaconda libdb-devel.x86_64 5.3.21-25.el7 @base libdb-utils.x86_64 5.3.21-25.el7 @anaconda libdrm.x86_64 2.4.97-2.el7 @anaconda libedit.x86_64 3.0-12.20121213cvs.el7 @anaconda libestr.x86_64 0.1.9-2.el7 @anaconda libevent.x86_64 2.0.21-4.el7 @base libevent-devel.x86_64 2.0.21-4.el7 @base libfastjson.x86_64 0.99.4-3.el7 @anaconda libffi.x86_64 3.0.13-19.el7 @anaconda libgcc.x86_64 4.8.5-44.el7 @anaconda libgcrypt.x86_64 1.5.3-14.el7 @anaconda libgomp.x86_64 4.8.5-44.el7 @anaconda libgpg-error.x86_64 1.12-3.el7 @anaconda libidn.x86_64 1.28-4.el7 @anaconda libjpeg-turbo.x86_64 1.2.90-8.el7 @base libkadm5.x86_64 1.15.1-50.el7 @base libmnl.x86_64 1.0.3-7.el7 @anaconda libmount.x86_64 2.23.2-65.el7 @anaconda libmpc.x86_64 1.0.1-3.el7 @base libndp.x86_64 1.2-9.el7 @anaconda libnetfilter_conntrack.x86_64 1.0.6-1.el7_3 @anaconda libnfnetlink.x86_64 1.0.1-4.el7 @anaconda libnl.x86_64 1.1.4-3.el7 @base libnl3.x86_64 3.2.28-4.el7 @anaconda libnl3-cli.x86_64 3.2.28-4.el7 @anaconda libpcap.x86_64 14:1.5.3-12.el7 @base libpcap-devel.x86_64 14:1.5.3-12.el7 @base libpciaccess.x86_64 0.14-1.el7 @anaconda libpipeline.x86_64 1.2.3-3.el7 @anaconda libpng.x86_64 2:1.5.13-8.el7 @anaconda libpwquality.x86_64 1.2.3-5.el7 @anaconda libselinux.x86_64 2.5-15.el7 @anaconda libselinux-devel.x86_64 2.5-15.el7 @base libselinux-python.x86_64 2.5-15.el7 @anaconda libselinux-utils.x86_64 2.5-15.el7 @anaconda libsemanage.x86_64 2.5-14.el7 @anaconda libsepol.x86_64 2.5-10.el7 @anaconda libsepol-devel.x86_64 2.5-10.el7 @base libsmartcols.x86_64 2.23.2-65.el7 @anaconda libss.x86_64 1.42.9-19.el7 @anaconda libssh2.x86_64 1.8.0-4.el7 @anaconda libstdc++.x86_64 4.8.5-44.el7 @anaconda libstdc++-devel.x86_64 4.8.5-44.el7 @base libsysfs.x86_64 2.1.0-16.el7 @anaconda libtalloc.x86_64 2.1.16-1.el7 @base libtalloc-devel.x86_64 2.1.16-1.el7 @base libtasn1.x86_64 4.10-1.el7 @anaconda libteam.x86_64 1.29-3.el7 @anaconda libtool.x86_64 2.4.2-22.el7_3 @base libtool-ltdl.x86_64 2.4.2-22.el7_3 @base libtool-ltdl-devel.x86_64 2.4.2-22.el7_3 @base libunistring.x86_64 0.9.3-9.el7 @anaconda libuser.x86_64 0.60-9.el7 @anaconda libutempter.x86_64 1.1.6-4.el7 @anaconda libuuid.x86_64 2.23.2-65.el7 @anaconda libverto.x86_64 0.2.5-4.el7 @anaconda libverto-devel.x86_64 0.2.5-4.el7 @base libxcb.x86_64 1.13-1.el7 @base libxml2.x86_64 2.9.1-6.el7.5 @anaconda libxml2-python.x86_64 2.9.1-6.el7.5 @base libxslt.x86_64 1.1.28-6.el7 @base libzip.x86_64 0.10.1-8.el7 @base linux-firmware.noarch 20200421-79.git78c0348.el7 @anaconda lm_sensors-devel.x86_64 3.4.0-8.20160601gitf9185e5.el7 @base lm_sensors-libs.x86_64 3.4.0-8.20160601gitf9185e5.el7 @base logrotate.x86_64 3.8.6-19.el7 @anaconda lsscsi.x86_64 0.27-6.el7 @anaconda lua.x86_64 5.1.4-15.el7 @anaconda lvm2.x86_64 7:2.02.187-6.el7 @anaconda lvm2-libs.x86_64 7:2.02.187-6.el7 @anaconda lz4.x86_64 1.8.3-1.el7 @anaconda lzo.x86_64 2.06-8.el7 @anaconda m4.x86_64 1.4.16-10.el7 @base mailcap.noarch 2.1.41-2.el7 @base make.x86_64 1:3.82-24.el7 @anaconda man-db.x86_64 2.6.3-11.el7 @anaconda mariadb.x86_64 1:5.5.68-1.el7 @base mariadb-devel.x86_64 1:5.5.68-1.el7 @base mariadb-libs.x86_64 1:5.5.68-1.el7 @anaconda mariadb-server.x86_64 1:5.5.68-1.el7 @base microcode_ctl.x86_64 2:2.1-73.el7 @anaconda mozjs17.x86_64 17.0.0-20.el7 @anaconda mpfr.x86_64 3.1.1-4.el7 @base nano.x86_64 2.3.1-10.el7 @base ncurses.x86_64 5.9-14.20130511.el7_4 @anaconda ncurses-base.noarch 5.9-14.20130511.el7_4 @anaconda ncurses-devel.x86_64 5.9-14.20130511.el7_4 @base ncurses-libs.x86_64 5.9-14.20130511.el7_4 @anaconda net-snmp.x86_64 1:5.7.2-49.el7_9.1 @updates net-snmp-agent-libs.x86_64 1:5.7.2-49.el7_9.1 @updates net-snmp-devel.x86_64 1:5.7.2-49.el7_9.1 @updates net-snmp-libs.x86_64 1:5.7.2-49.el7_9.1 @updates net-snmp-utils.x86_64 1:5.7.2-49.el7_9.1 @updates net-tools.x86_64 2.0-0.25.20131004git.el7 @base newt.x86_64 0.52.15-4.el7 @anaconda newt-python.x86_64 0.52.15-4.el7 @anaconda nginx.x86_64 1:1.16.1-3.el7 @epel nginx-all-modules.noarch 1:1.16.1-3.el7 @epel nginx-filesystem.noarch 1:1.16.1-3.el7 @epel nginx-mod-http-image-filter.x86_64 1:1.16.1-3.el7 @epel nginx-mod-http-perl.x86_64 1:1.16.1-3.el7 @epel nginx-mod-http-xslt-filter.x86_64 1:1.16.1-3.el7 @epel nginx-mod-mail.x86_64 1:1.16.1-3.el7 @epel nginx-mod-stream.x86_64 1:1.16.1-3.el7 @epel nspr.x86_64 4.21.0-1.el7 @anaconda nss.x86_64 3.44.0-7.el7_7 @anaconda nss-pem.x86_64 1.0.3-7.el7 @anaconda nss-softokn.x86_64 3.44.0-8.el7_7 @anaconda nss-softokn-freebl.x86_64 3.44.0-8.el7_7 @anaconda nss-sysinit.x86_64 3.44.0-7.el7_7 @anaconda nss-tools.x86_64 3.44.0-7.el7_7 @anaconda nss-util.x86_64 3.44.0-4.el7_7 @anaconda numactl-libs.x86_64 2.0.12-5.el7 @anaconda openldap.x86_64 2.4.44-22.el7 @anaconda openldap-devel.x86_64 2.4.44-22.el7 @base openssh.x86_64 7.4p1-21.el7 @anaconda openssh-clients.x86_64 7.4p1-21.el7 @anaconda openssh-server.x86_64 7.4p1-21.el7 @anaconda openssl.x86_64 1:1.0.2k-21.el7_9 @updates openssl-devel.x86_64 1:1.0.2k-21.el7_9 @updates openssl-libs.x86_64 1:1.0.2k-21.el7_9 @updates openssl11-libs.x86_64 1:1.1.1g-2.el7 @epel os-prober.x86_64 1.58-9.el7 @anaconda p11-kit.x86_64 0.23.5-3.el7 @anaconda p11-kit-trust.x86_64 0.23.5-3.el7 @anaconda p7zip.x86_64 16.02-10.el7 @epel pam.x86_64 1.1.8-23.el7 @anaconda pam-devel.x86_64 1.1.8-23.el7 @base parted.x86_64 3.1-32.el7 @anaconda passwd.x86_64 0.79-6.el7 @anaconda pciutils.x86_64 3.5.1-3.el7 @base pciutils-libs.x86_64 3.5.1-3.el7 @anaconda pcre.x86_64 8.32-17.el7 @anaconda pcre-devel.x86_64 8.32-17.el7 @base perl.x86_64 4:5.16.3-297.el7 @base perl-Carp.noarch 1.26-244.el7 @base perl-Compress-Raw-Bzip2.x86_64 2.061-3.el7 @base perl-Compress-Raw-Zlib.x86_64 1:2.061-4.el7 @base perl-DBD-MySQL.x86_64 4.023-6.el7 @base perl-DBI.x86_64 1.627-4.el7 @base perl-Data-Dumper.x86_64 2.145-3.el7 @base perl-Encode.x86_64 2.51-7.el7 @base perl-Error.noarch 1:0.17020-2.el7 @base perl-Exporter.noarch 5.68-3.el7 @base perl-ExtUtils-Install.noarch 1.58-297.el7 @base perl-ExtUtils-MakeMaker.noarch 6.68-3.el7 @base perl-ExtUtils-Manifest.noarch 1.61-244.el7 @base perl-ExtUtils-ParseXS.noarch 1:3.18-3.el7 @base perl-File-Path.noarch 2.09-2.el7 @base perl-File-Temp.noarch 0.23.01-3.el7 @base perl-Filter.x86_64 1.49-3.el7 @base perl-Getopt-Long.noarch 2.40-3.el7 @base perl-Git.noarch 1.8.3.1-23.el7_8 @base perl-HTTP-Tiny.noarch 0.033-3.el7 @base perl-IO-Compress.noarch 2.061-2.el7 @base perl-Net-Daemon.noarch 0.48-5.el7 @base perl-PathTools.x86_64 3.40-5.el7 @base perl-PlRPC.noarch 0.2020-14.el7 @base perl-Pod-Escapes.noarch 1:1.04-297.el7 @base perl-Pod-Perldoc.noarch 3.20-4.el7 @base perl-Pod-Simple.noarch 1:3.28-4.el7 @base perl-Pod-Usage.noarch 1.63-3.el7 @base perl-Scalar-List-Utils.x86_64 1.27-248.el7 @base perl-Socket.x86_64 2.010-5.el7 @base perl-Storable.x86_64 2.45-3.el7 @base perl-TermReadKey.x86_64 2.30-20.el7 @base perl-Test-Harness.noarch 3.28-3.el7 @base perl-Text-ParseWords.noarch 3.29-4.el7 @base perl-Thread-Queue.noarch 3.02-2.el7 @base perl-Time-HiRes.x86_64 4:1.9725-3.el7 @base perl-Time-Local.noarch 1.2300-2.el7 @base perl-constant.noarch 1.27-2.el7 @base perl-devel.x86_64 4:5.16.3-297.el7 @base perl-libs.x86_64 4:5.16.3-297.el7 @base perl-macros.x86_64 4:5.16.3-297.el7 @base perl-parent.noarch 1:0.225-244.el7 @base perl-podlators.noarch 2.5.1-3.el7 @base perl-threads.x86_64 1.87-4.el7 @base perl-threads-shared.x86_64 1.43-6.el7 @base php.x86_64 5.4.16-48.el7 @base php-cli.x86_64 5.4.16-48.el7 @base php-common.x86_64 5.4.16-48.el7 @base php-devel.x86_64 5.4.16-48.el7 @base php-fpm.x86_64 5.4.16-48.el7 @base php-mbstring.x86_64 5.4.16-48.el7 @base php-mysql.x86_64 5.4.16-48.el7 @base php-pdo.x86_64 5.4.16-48.el7 @base php-xml.x86_64 5.4.16-48.el7 @base pinentry.x86_64 0.8.1-17.el7 @anaconda pkgconfig.x86_64 1:0.27.1-4.el7 @anaconda plymouth.x86_64 0.8.9-0.34.20140113.el7.centos @anaconda plymouth-core-libs.x86_64 0.8.9-0.34.20140113.el7.centos @anaconda plymouth-scripts.x86_64 0.8.9-0.34.20140113.el7.centos @anaconda policycoreutils.x86_64 2.5-34.el7 @anaconda polkit.x86_64 0.112-26.el7 @anaconda polkit-pkla-compat.x86_64 0.1-4.el7 @anaconda popt.x86_64 1.13-16.el7 @anaconda popt-devel.x86_64 1.13-16.el7 @base postfix.x86_64 2:2.10.1-9.el7 @anaconda procps-ng.x86_64 3.3.10-28.el7 @anaconda psmisc.x86_64 22.20-17.el7 @base pth.x86_64 2.0.7-23.el7 @anaconda pygpgme.x86_64 0.3-9.el7 @anaconda pyliblzma.x86_64 0.5.3-11.el7 @anaconda pyparsing.noarch 1.5.6-9.el7 @base python.x86_64 2.7.5-90.el7 @updates python-chardet.noarch 2.2.1-3.el7 @base python-configobj.noarch 4.7.2-7.el7 @anaconda python-decorator.noarch 3.4.0-3.el7 @anaconda python-devel.x86_64 2.7.5-90.el7 @updates python-firewall.noarch 0.6.3-11.el7 @anaconda python-gobject-base.x86_64 3.22.0-1.el7_4.1 @anaconda python-iniparse.noarch 0.4-9.el7 @anaconda python-kitchen.noarch 1.1.1-5.el7 @base python-libs.x86_64 2.7.5-90.el7 @updates python-linux-procfs.noarch 0.4.11-4.el7 @anaconda python-perf.x86_64 3.10.0-1160.el7 @anaconda python-pycurl.x86_64 7.19.0-19.el7 @anaconda python-pyudev.noarch 0.15-9.el7 @anaconda python-rpm-macros.noarch 3-34.el7 @base python-schedutils.x86_64 0.4-6.el7 @anaconda python-slip.noarch 0.4.0-4.el7 @anaconda python-slip-dbus.noarch 0.4.0-4.el7 @anaconda python-srpm-macros.noarch 3-34.el7 @base python-urlgrabber.noarch 3.10-10.el7 @anaconda python2-rpm-macros.noarch 3-34.el7 @base pyxattr.x86_64 0.5.1-5.el7 @anaconda qrencode-libs.x86_64 3.4.1-3.el7 @anaconda readline.x86_64 6.2-11.el7 @anaconda readline-devel.x86_64 6.2-11.el7 @base rootfiles.noarch 8.1-11.el7 @anaconda rpm.x86_64 4.11.3-45.el7 @anaconda rpm-build-libs.x86_64 4.11.3-45.el7 @anaconda rpm-devel.x86_64 4.11.3-45.el7 @base rpm-libs.x86_64 4.11.3-45.el7 @anaconda rpm-python.x86_64 4.11.3-45.el7 @anaconda rsync.x86_64 3.1.2-10.el7 @base rsyslog.x86_64 8.24.0-55.el7 @anaconda sed.x86_64 4.2.2-7.el7 @anaconda selinux-policy.noarch 3.13.1-268.el7 @anaconda selinux-policy-targeted.noarch 3.13.1-268.el7 @anaconda setup.noarch 2.8.71-11.el7 @anaconda shadow-utils.x86_64 2:4.6-5.el7 @anaconda shared-mime-info.x86_64 1.8-5.el7 @anaconda slang.x86_64 2.2.4-11.el7 @anaconda snappy.x86_64 1.1.0-3.el7 @anaconda sqlite.x86_64 3.7.17-8.el7_7.1 @anaconda sudo.x86_64 1.8.23-10.el7 @anaconda systemd.x86_64 219-78.el7 @anaconda systemd-libs.x86_64 219-78.el7 @anaconda systemd-sysv.x86_64 219-78.el7 @anaconda systemtap-sdt-devel.x86_64 4.0-13.el7 @base sysvinit-tools.x86_64 2.88-14.dsf.el7 @anaconda tar.x86_64 2:1.26-35.el7 @anaconda tcp_wrappers-devel.x86_64 7.6-77.el7 @base tcp_wrappers-libs.x86_64 7.6-77.el7 @anaconda teamd.x86_64 1.29-3.el7 @anaconda tree.x86_64 1.6.0-10.el7 @base tuned.noarch 2.11.0-9.el7 @anaconda tzdata.noarch 2020a-1.el7 @anaconda unixODBC.x86_64 2.3.1-14.el7 @base unixODBC-devel.x86_64 2.3.1-14.el7 @base unzip.x86_64 6.0-21.el7 @base ustr.x86_64 1.0.4-16.el7 @anaconda util-linux.x86_64 2.23.2-65.el7 @anaconda vim-common.x86_64 2:7.4.629-8.el7_9 @updates vim-enhanced.x86_64 2:7.4.629-8.el7_9 @updates vim-filesystem.x86_64 2:7.4.629-8.el7_9 @updates vim-minimal.x86_64 2:7.4.629-7.el7 @anaconda virt-what.x86_64 1.18-4.el7 @anaconda wget.x86_64 1.14-18.el7_6.1 @base which.x86_64 2.20-7.el7 @anaconda wireless-tools.x86_64 1:29-13.el7 @epel wpa_supplicant.x86_64 1:2.6-12.el7 @anaconda xfsprogs.x86_64 4.5.0-22.el7 @anaconda xz.x86_64 5.2.2-1.el7 @anaconda xz-devel.x86_64 5.2.2-1.el7 @base xz-libs.x86_64 5.2.2-1.el7 @anaconda yum.noarch 3.4.3-168.el7.centos @anaconda yum-metadata-parser.x86_64 1.1.4-10.el7 @anaconda yum-plugin-fastestmirror.noarch 1.1.31-54.el7_8 @anaconda yum-utils.noarch 1.1.31-54.el7_8 @base zip.x86_64 3.0-11.el7 @base zlib.x86_64 1.2.7-18.el7 @anaconda zlib-devel.x86_64 1.2.7-18.el7 @base [root@localhost ~]#
========== End