• raw udp client port 50000 unreachable


    ^C[root@bogon raw-sockets-example]# cat raw_udp_client.c 
    #include <stdio.h>
    #include <stdlib.h>
    #include <string.h>
    #include <unistd.h>
    #include <sys/socket.h>
    #include <netinet/in.h>
    #include <arpa/inet.h>
    #include <signal.h>
    #include <errno.h>
    #include <linux/ip.h>
    #include <linux/udp.h>
    
    struct sockaddr_in *serveraddr = NULL, *clientaddr;
    int sockfd;
    
    #define PORT 50001
    #define SERVER_PORT 50000
    #define SERVER_ADDR "10.10.16.82"
    #define CLIENT_ADDR "10.10.16.81"
    /* structure to calculate UDP checksum
    * The below members are part of the IP header
    * which do not change from the UDP layer and hence
    * are used as a part of the UDP checksum */
    
    struct pseudo_iphdr {
            unsigned int source_ip_addr;
            unsigned int dest_ip_addr;
            unsigned char fixed;
            unsigned char protocol;
            unsigned short udp_len;
    };
    
    /* checksum code to calculate UDP checksum
    * Code taken from Unix network programming – Richard stevens*/
    
    unsigned short in_cksum (uint16_t * addr, int len)
    {
            int nleft = len;
            unsigned int sum = 0;
            unsigned short *w = addr;
            unsigned short answer = 0;
    
            /* Our algorithm is simple, using a 32 bit accumulator (sum), we add
            * sequential 16 bit words to it, and at the end, fold back all the
            * carry bits from the top 16 bits into the lower 16 bits.
            */
            while (nleft > 1) {
                    sum += *w++;
                    nleft -= 2;
            }
    
            /* mop up an odd byte, if necessary */
            if (nleft == 1) {
                    *(unsigned char *) (&answer) = * (unsigned char *) w;
                    sum += answer;
            }
    
            /* add back carry outs from top 16 bits to low 16 bits */
            sum = (sum >> 16) + (sum & 0xffff); /* add hi 16 to low 16 */
            sum += (sum >> 16); /* add carry */
            answer = (unsigned short) ~sum; /* truncate to 16 bits */
            return (answer);
    }
    
    /* Interrupt_handler – so that CTRL + C can be used to
    * exit the program */
    void interrupt_handler (int signum) {
            close(sockfd);
            free(clientaddr);
            exit(0);
    }
    
    #if DEBUG
    /* print the IP and UDP headers */
    void dumpmsg(unsigned char *recvbuffer, int length) {
            int count_per_length = 28, i = 0;
            for (i = 0; i < count_per_length; i++) {
                    printf("%02x ", recvbuffer[i]);
            }
            printf("
    ");
    }
    #endif
    
    int main () {
            char buffer[1024] = {0};
            unsigned char recvbuffer[1024] = {0};
            int length;
            char *string = "Hello UDP server";
            struct udphdr *udp_hdr = NULL;
            char *string_data = NULL;
            char *recv_string_data = NULL;
            char *csum_buffer = NULL;
            struct pseudo_iphdr csum_hdr;
            int error;
    
            signal (SIGINT, interrupt_handler);
            signal (SIGTERM, interrupt_handler);
    
            /* Part 1: create the socket */
            sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_UDP);
            if(0 > sockfd) {
                    printf("unable to create socket
    ");
                    exit(0);
            }
    
            clientaddr = (struct sockaddr_in *)malloc(sizeof(struct sockaddr_in));
            if (clientaddr == NULL) {
                    printf("could not allocate memory
    ");
                    goto end;
             }
    
            clientaddr->sin_family = AF_INET;
            clientaddr->sin_port = PORT;
            clientaddr->sin_addr.s_addr = inet_addr(CLIENT_ADDR);
    
            /* Part 2 – fill data structure and bind to socket */
            if (0 != (bind(sockfd, (struct sockaddr *)clientaddr, sizeof(struct sockaddr_in)))) {
                    printf("could not bind server socket to address
    ");
                    goto end1;
            }
    
            /* part 3: read and write data */
            serveraddr = (struct sockaddr_in *)malloc(sizeof(struct sockaddr_in));
            if (serveraddr == NULL) {
                   printf("Unable to allocate memory to server address socket
    ");
                   goto end2;
            }
            serveraddr->sin_family = AF_INET;
            serveraddr->sin_port = SERVER_PORT;
            serveraddr->sin_addr.s_addr = inet_addr(SERVER_ADDR);
    
            error = connect(sockfd, (struct sockaddr *)serveraddr, sizeof(struct sockaddr_in));
            if (error != 0) {
                    printf("error %d", errno);
                    printf("connect returned error
    ");
                    goto end2;
           }
    
           /* copy the data after the UDP header */
           string_data = (char *) (buffer + sizeof(struct udphdr));
           strncpy(string_data, string, strlen(string));
    
           /* Modify some parameters to send to client in UDP hdr */
    
           udp_hdr = (struct udphdr *)buffer;
           udp_hdr->source = htons(PORT);
           udp_hdr->dest = htons(SERVER_PORT);
           udp_hdr->len = htons(sizeof(struct udphdr));
    
           csum_buffer = (char *)calloc((sizeof(struct pseudo_iphdr) + sizeof(struct udphdr) + strlen(string_data)), sizeof(char));
           if (csum_buffer == NULL) {
                   printf("Unable to allocate csum buffer
    ");
                   goto end1;
           }
    
           csum_hdr.source_ip_addr = inet_addr(CLIENT_ADDR);
           csum_hdr.dest_ip_addr = inet_addr(SERVER_ADDR);
           csum_hdr.fixed = 0;
           csum_hdr.protocol = IPPROTO_UDP; /* UDP protocol */
           csum_hdr.udp_len = htons(sizeof(struct udphdr) + strlen(string_data) + 1);
    
           memcpy(csum_buffer, (char *)&csum_hdr, sizeof(struct pseudo_iphdr));
           memcpy(csum_buffer + sizeof(struct pseudo_iphdr), buffer, (sizeof(struct udphdr) + strlen(string_data) + 1));
    
            /* since we are resending the same packet over and over again
            * free the csum buffer here */
            free (csum_buffer);
    
            while (1) {
                    write(sockfd, buffer, sizeof(buffer));
    
                    memset(recvbuffer, 0, sizeof(recvbuffer));
                    read(sockfd, recvbuffer, sizeof(recvbuffer));
    
                    udp_hdr = (struct udphdr *)(recvbuffer + sizeof (struct iphdr));
                    recv_string_data = (char *) (recvbuffer + sizeof (struct iphdr) + sizeof (struct udphdr));
    #if DEBUG
                    dumpmsg((unsigned char *)&recvbuffer, (sizeof(struct iphdr) + sizeof(struct udphdr)+ strlen(string_data) + 1));
    #endif
                    if (PORT == ntohs(udp_hdr->dest)) {
                            printf("udp packet received from port %d
    ",ntohs(udp_hdr->source));
                            printf("data received from server is : %s
    ", recv_string_data);
                    }
            }
    
    end2:
            free(serveraddr);
    end1:
            free(clientaddr);
    end:
           close(sockfd);
    
           return 0;
    }

    运行

    Makefile rawsockets.c raw_udp_client raw_udp_server README.md sniffer sniffer3 sniffer.c
    [root@bogon raw-sockets-example]# gcc raw_udp_client.c -o raw_udp_client
    [root@bogon raw-sockets-example]# ./raw_udp_client

    报文发出去了

    ast login: Sun May 16 16:52:01 2021 from 10.10.16.1
    [root@bogon ~]# tcpdump -i enahisic2i0 udp and host 10.10.16.82 -nnvvv
    tcpdump: listening on enahisic2i0, link-type EN10MB (Ethernet), capture size 262144 bytes
    16:56:27.801833 IP (tos 0x0, ttl 64, id 34276, offset 0, flags [DF], proto UDP (17), length 1044)
        10.10.16.81.50001 > 10.10.16.82.50000: [no cksum] UDP, length 0
    16:56:27.802049 IP (tos 0x0, ttl 64, id 34277, offset 0, flags [DF], proto UDP (17), length 1044)
        10.10.16.81.50001 > 10.10.16.82.50000: [no cksum] UDP, length 0
    16:56:27.802145 IP (tos 0x0, ttl 64, id 34278, offset 0, flags [DF], proto UDP (17), length 1044)
        10.10.16.81.50001 > 10.10.16.82.50000: [no cksum] UDP, length 0
    16:56:27.802233 IP (tos 0x0, ttl 64, id 34279, offset 0, flags [DF], proto UDP (17), length 1044)
        10.10.16.81.50001 > 10.10.16.82.50000: [no cksum] UDP, length 0
    16:56:27.802314 IP (tos 0x0, ttl 64, id 34280, offset 0, flags [DF], proto UDP (17), length 1044)
        10.10.16.81.50001 > 10.10.16.82.50000: [no cksum] UDP, length 0
    16:56:27.802399 IP (tos 0x0, ttl 64, id 34281, offset 0, flags [DF], proto UDP (17), length 1044)
        10.10.16.81.50001 > 10.10.16.82.50000: [no cksum] UDP, length 0
    16:56:27.802490 IP (tos 0x0, ttl 64, id 34282, offset 0, flags [DF], proto UDP (17), length 1044)
        10.10.16.81.50001 > 10.10.16.82.50000: [no cksum] UDP, length 0

    收到端口不存在的icmp通知

    tcpdump: listening on enahisic2i0, link-type EN10MB (Ethernet), capture size 262144 bytes
    16:56:27.801999 IP (tos 0xc0, ttl 64, id 64114, offset 0, flags [none], proto ICMP (1), length 56)
        10.10.16.82 > 10.10.16.81: ICMP 10.10.16.82 udp port 50000 unreachable, length 36
            IP (tos 0x0, ttl 64, id 34276, offset 0, flags [DF], proto UDP (17), length 1044)
        10.10.16.81.50001 > 10.10.16.82.50000: [no cksum] UDP, length 0
    16:56:27.802112 IP (tos 0xc0, ttl 64, id 64115, offset 0, flags [none], proto ICMP (1), length 56)
        10.10.16.82 > 10.10.16.81: ICMP 10.10.16.82 udp port 50000 unreachable, length 36
            IP (tos 0x0, ttl 64, id 34277, offset 0, flags [DF], proto UDP (17), length 1044)
        10.10.16.81.50001 > 10.10.16.82.50000: [no cksum] UDP, length 0
    16:56:27.802204 IP (tos 0xc0, ttl 64, id 64116, offset 0, flags [none], proto ICMP (1), length 56)
        10.10.16.82 > 10.10.16.81: ICMP 10.10.16.82 udp port 50000 unreachable, length 36
            IP (tos 0x0, ttl 64, id 34278, offset 0, flags [DF], proto UDP (17), length 1044)
        10.10.16.81.50001 > 10.10.16.82.50000: [no cksum] UDP, length 0
    16:56:27.802290 IP (tos 0xc0, ttl 64, id 64117, offset 0, flags [none], proto ICMP (1), length 56)
        10.10.16.82 > 10.10.16.81: ICMP 10.10.16.82 udp port 50000 unreachable, length 36
            IP (tos 0x0, ttl 64, id 34279, offset 0, flags [DF], proto UDP (17), length 1044)
        10.10.16.81.50001 > 10.10.16.82.50000: [no cksum] UDP, length 0
    16:56:27.802371 IP (tos 0xc0, ttl 64, id 64118, offset 0, flags [none], proto ICMP (1), length 56)
        10.10.16.82 > 10.10.16.81: ICMP 10.10.16.82 udp port 50000 unreachable, length 36
            IP (tos 0x0, ttl 64, id 34280, offset 0, flags [DF], proto UDP (17), length 1044)
        10.10.16.81.50001 > 10.10.16.82.50000: [no cksum] UDP, length 0
    16:56:27.802463 IP (tos 0xc0, ttl 64, id 64119, offset 0, flags [none], proto ICMP (1), length 56)
        10.10.16.82 > 10.10.16.81: ICMP 10.10.16.82 udp port 50000 unreachable, length 36
            IP (tos 0x0, ttl 64, id 34281, offset 0, flags [DF], proto UDP (17), length 1044)
        10.10.16.81.50001 > 10.10.16.82.50000: [no cksum] UDP, length 0
  • 相关阅读:
    理解k8s资源限制系列(二):cpu time
    计算机网络 第五章:传输层
    SYN 攻击原理及解决方法
    Lua中 pairs和ipairs的区别
    nginx里的变量,实现简单过滤。
    LVS负载均衡(LVS简介、三种工作模式、十种调度算法)
    Lua中的loadfile、dofile、require详解
    NGINX 上的限流
    shell 输出json格式的内容
    xilinx资源
  • 原文地址:https://www.cnblogs.com/dream397/p/14774173.html
Copyright © 2020-2023  润新知